problem of memory with a single desktop computer in a pool

Similar Questions

• lost my vc10e rm pairing remote with my vaio desktop computer

  I recently lost pairing of my hand that held remote control rm vc10e with my vaio desktop computer I have changed batteries recently has yet no change

  any suggestions would be welcome.
  Niall keogh

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  See the article and check if that helps:

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883259

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if it works:

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

• I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I rebooted, restored, ran chkdsk, sfc/scannow, uninstall/install update etc...

  I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I have rebooted, restored (im doing this), ran chkdsk, sfc/scannow, malware, virus, uninstall/install etc and my machine wil always do not run for a long time without going through some sort of problem after an hour or two.  Can anyone suggest what to do about this? I read a lot of information online on all the windows 8 and fixes bugs, etc, but anything Microsoft/Windows, which ensures its customers, a hotfix or compesating their customers with software that still works. This isn't a hardware problem, and I can't keep day and bad shooting and trying to fix the day things in?

  Sincerely,
  A client who is a loss for words.
  Here are some problems in no particular order.
  1.) apps to not install it, and/or Windows saying they are when they are in fact not. The fix to install / uninstall, or get on the site of windows directly in general does not, and or does not at all.
  The change permissions 2.) does not work on files that you should be able to access in changing oxnership, permissions, etc.
  3.) Google chrome won't let me access my account of microsoft (or fact rarely) trying to access assistance. But internet Explorer doesn't?
  Randomly will increase from Internet 4.) a previous connection wired to wireless to a reboot.
  5.) my 8 'key' windows was only shown to me after that I have let Windows scan my machine online? Why? I paid for this... I restarted it and it says: service not available (it worked the third attempt which was 1-3 minutes after the initial analysis). Windows only showed my product ID not the key. I know that my victory. 8 was OEM when preinstalled I bought it new, but why didn't we files on it that had nothing to do with activation, appearing on dates for three weeks, or so before I bought it. What is the 'activation of the factory'?
  6 :) Windows Essentials does not hang for a long time, and the troubleshooterprogram of update simply does not work (I had to go to the website to try tp operate, the bluetooth functionality is not good that there is an error.
  7.) windows scan and repair gets stuck at 27% (Im not the only one with this problem).
  8.), avery MS Office 2013 Disappears so often and not easy to reload "we have encountered a problem.
   

  The computer manufacturer is responsible to see that it works properly with Windows 8. It says that it is a new computer I contact HP and make these problems their. If you don't get satisfactory results I turn and look elsewhere for a computer. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Delete the user account associated with a persistent desktop computer

  Hello

  I just got my first pool persistent up and running and successfully delivered a desktop computer to a thin client using the VDM on XP - E connection software. Initially, I tried using the administrator account. Now I have to work, I would like to remove the administrator account on this computer virtual association. I tried using vdmadmin.exe but I had a bad argument error...

  C:\Program VMware View\Server\bin & gt; vdmadmin.exe-L m CMA-LAB1 of CMA-LAB - r cma-vm\Administrator

  Invalid parameter: bad argument 'CMA - LAB ".

  Invalid syntax

  I got work KB 1007526 and I tried to change to adapt to what I was doing, of course not.

  Any point in the right direction would be appreciated.

  ... also, the command in the KB is to assign the user who needs - u. To remove it use - r. It does not take a username.

  For complete command-line syntax, see http://www.vmware.com/pdf/view40_command_line_tool.pdf

  Select this option.

• Unable to recompose or remove a desktop computer in a pool

  Hi all

  Trouble with a couple of VM in a pool.  I reconstructed most of the ion of desktop computers, this pool, but there are a couple that will not.  Get error 'Failure ti delete VM - Null' when trying to remove it.  Get the error "view composer fault: could not find the VC object of type VirtualMachine and id (Please check the master VM/snapshot or its replica) " trying to recompose.  I tried to create another cliché and redial but get the same error.  I am able to update the computer and do to make him available.  Help, questions or comments are welcome.

  View running 6.2

  Thanks Perry

  Remove invalid entries clone bound automatically using the ViewDBChk tool. This tool must be run on the the view connection server. ViewDbChk - scanMachines the command is case-sensitive

• XP SP3 install problem on my presario SR1550NX with proc AMD desktop computer.

  When installing service pak 3 full and is restarting my system will go up only in safe mode, no error message that I can understand.  It lasts for quite awhile and I've tried several things without success.  Everything works well with SP2 but want to install some latest updates for some of my programs, which often need SP3.

  Here is a support article of MS

  I suggest that you download the SP3, then burn it to a CD.

  PS > I did successfully this SP3 update on many computers by using a CD.

• my hp df800 digital picture frame works with a Mac desktop computer?

  A bought a desktop imac computer and am trying to connect my HP digital picture frame to this PC.  Can connect but can not get any further with it.  I need to download something to help, or is - this just works with Windows PC?

  Ntgerh64, welcome to the forum.

  Page 12 of the user guide it lists the versions of Windows.  I couldn't find any mention of your Mac OS.

  If your problem is solved, please click "accept as a Solution.

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• BlackBerry smartphones "BOLD" problem Calendar Sync with PocketMac and Desktop Manager 4.6

  # The RIM case: 5499753

  I have 4 email addresses attached to my BB "BOLD".
  When I go into Options / Advanced / Default Services / calendar, I have 4 entries (all e-mail addresses).

  If I go to calendar, Options, there are all of an additional entry in "Default device" 4 as well as e-mail addresses.

  Regarding the calendar by address entries, it is divided as follows:

  Email 1) 1
  E-mail 2) 0
  Email 3) 50
  Default device) 38
  Email 5) 0

  When I try to synchronize, the desktop software sees only the #3 email that is my rogers.blackberry.net with 50 entries and sync in Outlook, resulting in a loss of events in my Outlook on my desktop. All events are still in bold.

  I can not also move all the elements of the default device and assign it to the category E-mail no. 3, which reduced from 38 to 37 and from 50 to 51.
  Once you have received an entry on the device, you cannot change the e-mail addresses associated with the event.

  Removing the servicebooks (CICAL all) the default device entry has the combined entries.

  Once the service books are sent to the device, it then splits them again.

  This seems to be a problem with the Blackberry "BOLD" operating system, or a problem of service book (since when CICAL service books are deleted, calendar entries all combine for peripheral list by default.)

  This also happens on WinXP with 4.6 DM, is not platform specific.

  OS: 4.6.0.125 & 4.6.0.134 tempted.  Both have the same result.

  Just got off the phone with RIM support.

  Here is the procedure:

  All backup data

  Do a thorough cleaning (Options, Security Options, General settings)

  Content compression set to disabled

  Save the settings

  Return to the General settings, Blackberry press button and wipe Handheld.

  Load DM and go to the backup/restore, advanced.

  Load your backup file.

  Restore only the peripheral calendar (drag the calendar on the right)

  You should be able to see in the calendar options, device default calendar with all the entries.

  Synchronize in Outlook.

  At this point, you should have all your entries in Outlook.

  Hard Reset (press left ALT + SHIFT RIGHT + DELETE and hold the button until it restarts the device)

  Go to the website of your provider BIS and remove all the entries that you want as the default calendar.

  Set the date and time on the device.

  Turn on the wireless Radio

  Return Service directories from the BIS website.

  Go to Options, advanced, default Services.

  Set default CICAL (this should be the one you really want to like the calendar by default and the only one on the device).

  Set the default CMIME if necessary.

  Add the e-mail addresses that you deleted on the BIS website.

  Return service directories.

  You should have all your e-mail addresses and no. peripheral in your calendar, by default.

  All entries in the calendar should be associated with the address you chose as the default value.

  Resync using DM.

  Note - PocketMac 4.1.25 is not supported with the "BOLD".

  This creates blockages and major sync issues.

  I have run this procedure from a computer running Windows XP with Office 2003.

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• Memory update for P6240F desktop computer? Also processor options

  I have a HP P6240F of desktop with AMD Q8300 processor and 8 GB of RAM (4x2Go).  I think that when I checked before I determined that 8 GB is the maximum that could handle the motherboard. Can anyone confirm that this is still the case? Also is there a upgrade cheap processor I could do that is compatible with my motherboard? With relatively inexpensive memory, I'd love to spend at least 12 GB if possible.

  Thank you...

  Hello

  8Gb is the maximum number. You can check with this:

  http://support.HP.com/us-en/document/c01746799

  Kind regards.

• BlackBerry Smartphones BlackBerry multiple on a single desktop computer.

  If I give my wife a blackberry 8300 like mine, can then synchronize it with its 2003 Outlook in its Microsoft XP user account?

  I tried to do and synch had his new blackberry very well in his user account.  No problem.  However, when I got back to my user account to sync my I had a few difficulties to get.  I received error messages "unrecognized device".  After some considerable fiddling, I have now solved this problem.

  I'm trying to do something that is totally impossible?

  Thanks for any thoughts on this.

  Richard

  Hi and welcome to the forums,

  I think that you do it correctly, the Desktop Manager goes by PIN code. I would have suggested 2 accounts on windows that you already have.

  There are two files remain active on the PC, when you close Desktop Manager: BBdevmgr.exe and rimdevicemgr.exe Device Manager. I usually have to manually kill the process using Windows Task Manager. I did not have two accounts on my machine, so I don't know if these end up when switch you users. I was looking at these processes when you place or logoff users. If they stay in place, they will give you bad. You can take the habit of restarting between you and your wife using the Desktop Manager.

  Let me know if you need more information!

  Otherwise, please take a few minutes to solve the message

  Thank you!

• problems of memory with T3500

  Hello

  I have a T3500 with the following problem.

  I get 'error of memorry in DIMM 2' but only after a reboot.

  No one knows what may cause this?

  I cleaned the memory locations with electric contact spray, but the problem remains.

  It looks like a problem of maotherboard but I wonder if it is possible to fix such a problem

  Thank you.

  One or more pieces of ram you are using is bad or not Tricanale compatible or one or more sockets for ram is physically damaged. The ram should not be ram Joes Crab Shack or mixed.  They should be matched 3 sets where wait States and the manufacturer are exactly the same.

  

• How can I set up a wireless connection with the Gateway desktop computer?

  I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

  but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

  drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

  Contact technical support
  http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

  You have the right drivers for your machine and your operating system?
  http://support.gateway.com/product/default.aspx?modelId=4522.------

  You have a wireless router for your computer to connect via?

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

  Connect wirelessly to the Internet with Windows 8
  http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

• Problem of memory with esxi 4

  I have a brand new hp dl380 G6 with 2 xeon x 5560 server and 48 GB of ram ddr, it is used in combination with a fiber of msa 2212 hp san chanel.

  The host runs 36 windows virtual xp with each 1vcpu and 512 MB memory.

  given that we have upgraded to esxi 4 almost al my virtual machines are showing the alarm that the memory usage of comments is raw, some off them show same not the warning, but the symbol of the alarm.

  In the virtual machine overview comments mem % varies between 90% and 68%.

  The host mem is also high, always 537 MB.

  The same takes place of issue with the version of virtual machine 4 and 7, vmwaretools is upgraded to version latsest, even with a new installation of a host appaers problem.

  On the same host, we tested with esxi 3.5, we have not had any warning to all mem % comments has been between 2 and 18%

  the host here for most memory less than 100 MB

  Is that a question or there at - it something wrong with my setup?

  Has anyone seen this problem too?

  Concerning

  Sven

  Hi, this is probably related to the Nehalem architecture and how page sharing works: http://communities.vmware.com/message/1264573