problem of speech recognition language.

Similar Questions

• Windows 7 speech recognition, language selection

  I have windows 7 in English, and I am wanting to use speech recognition in french

  I tried to do this:
  

  1. Open speech recognition by clicking theStartbutton, clickingControl Panel, easy access, and then clickingspeech recognition.
  2. In the left pane, clickAdvanced speech options .

  But I don't have the United States and the United Kingdom English as possible languages English. Is it possible to install other languages? Because I read that speech recognition is also available in French and Chinese.

  I have windows 7 in English, and I am wanting to use speech recognition in french

  I tried to do this:
  

  1. Open speech recognition by clicking theStartbutton, clickingControl Panel,easy access, and then clickingspeech recognition.
  2. In the left pane, clickAdvanced speech options.

  But I don't have the United States and the United Kingdom English as possible languages English. Is it possible to install other languages? Because I read that speech recognition is also available in French and Chinese.

  Hello

  You can use speech recognition in a different language if a MUI language pack is installed for one of the supported languages. 35 MUI language packs are only available in Ultimate and Windows 7 Enterprise editions.

  In your case, the French MUI language pack installation would alter the parent language to French, and allow you to easily switch between languages and use the speech recognition in this language.

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  Windows speech recognition language must be identical to the language of the operating system in Windows Vista
  (Also applies to Windows 7)

  Setting speech options

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Problem with speech recognition in Windows 7 and MS Word 2010 - strange window opens

  I have been using speech recognition in Windows 7 to dictate in Word 2010.  Yesterday it worked fine: I did a number of training records, added a few new words in the speech dictionary and dictated a part of a document.  No major problems.

  Today, however, when I begin to dictate, rather than insert the words directly in my Word document, a secondary window will appear next to the insertion point and text appears here, with small buttons that say "insert" and "Cancel".  It's rather annoying - get the text dictated in the document, I must stop dictating and say "insert."  Is it possible to prevent that from happening?  As far as I know, I don't have any changes to the settings or program options to cause this.  Help!

  Thanks for the answer, but now I can't seem to reproduce the problem.  I don't know why what started, but it doesn't seem to be the case more.  Thank you.

• problem of speech recognition in Windows Live Mail on Windows 7

  I use speech recognition with Windows 7 software. When I am dictating an e-mail in Windows Live Mail, sometimes a small box appears and dictation appears here, and I have to keep saying 'OK' for the words appear in the e-mail message. But sometimes the disc text right into the email as if I type it. Why is this happening? Only, it seems to happen in an email, not anywhere, so far.

  Hello

  When you use Windows Live Mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• We get an error "language is not supported" while tyring to start speech recognition program.

  * Original title: speech recognition a work stoppage

  When I try to start the speech, I get an error message it con could not start because the language is not supported and that the recognizer must be identical to the user interface and both are the English uk value.

  Someone at - it a response?

  Hi, Bill.

  Try this

  http://www.SevenForums.com/tutorials/179110-speech-recognition-language-configuration-not-supported-error-fix.html

  Windows speech recognition language must be identical to the language of the operating system in Windows Vista

  http://support.Microsoft.com/kb/934377

• Does not meet the dictation but respond to speech recognition commands

  When I use the program of recognition of Micrsoft, it recognizes all the commands in a very precise way but is completely insensitive to the dictation.

  I have a Vista laptop, OS.  Speech recognition to work 100%.  My hard drive crashed, though recently.  I replaced and reinstalled the operating system and all programs and settings that came with it originally.  Everything else works except the dictation speech recognition feature.

  I know that this is not a problem with my profile, system or settings of the sound or network of microphones.  It is not a problem with speech recognition recognizing my voice.  Orders of all the work, but when I try to dictate his only answer is "What was that?".

  I tried new voice profiles.  I tried most training.  I tried the two selection and de-selection 'enable dictation everywhere '.  I tried to dictate with numerous Yahoo Messenger to programs - Word, Notepad, WordPad, Windows Messenger, Blogger.com, etc..

  Someone at - it a way to solve this problem?

  I noticed a few other threads with similar problems, but they seem to have answers that do me no good.  They are all things I've tried.

  AaronDN wrote:
  "I know that this is not a problem with my profile, system or settings of the sound or network of microphones.  It is not a problem with speech recognition recognizing my voice.  "Orders of all the work, but when I try to dictate his only answer is 'What was that?'."

  In fact it is more likely your microphone. The best microphones for speech recognition are close talk headset or portable microphones used 1/2 to 1 inch of his mouth. The sound card on your laptop can not be shielded and pick up electronic noises of in the computer case.

  Orders are easily recognizable because they are part of a small limited vocabulary. Dictation using a broad vocabulary and must analyze through tens of thousands of words and to compare each word clues for context before and after.

• Speech recognition ceased to recognize my logitech microphone

  Speech recognition ceased to recognize my Logitech microphone.  The microphone works very well in the video camera function.  Perhaps I should uninstall and reinstall the speech recognition.  I don't know how to do this.  Can anyone help?

  Hello Kneed2no,

  Thank you for visiting the Microsoft answers Site.

  Please relay if the problem occurs after trying the steps in the link provided above by Samhrutha g problems: Troubleshoot speech recognition:http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-Speech-Recognition-problems 

  You can also view the issue after you create a voice profile. To do this, see the following steps:

  ·         Click Start > Control Panel > accessibility and click Speech Recognition Options.

  ·         Then, click Train your computer to better understand you, and then follow the instructions in the voice training wizard.

  Please let us know if this solves the problem for you.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• from speech recognition in windows 7

  Cannot start speech recognition by using windows 7. headseat is not working properly, adjusted to my voice, msg pop "cannot start the speech recognition, language recognition configuration to match language windows user, change in advanced options." "Microsoft speech recognition system 8.0 for windows, no options to change language account settings.

  Cannot start speech recognition by using windows 7. headseat is not working properly, adjusted to my voice, msg pop "cannot start the speech recognition, language recognition configuration to match language windows user, change in advanced options." "Microsoft speech recognition system 8.0 for windows, no options to change language account settings.

  Go to control panel, then the speech recognition. Click on advanced options speech on the left side of the window of speech recognition. The language in the drop-down list corresponds to the language you want to use? See screenshot below.

  Marty

  

• Speech recognition is available for use in Italian?

  I'm looking for a speech recognition program that allows dictation in Italian. Can I use the version of Windows 7 for this? If so, how can I change the input language? Thank you.

  Hello

  What version (Home, Professional, ultimate) is installed on the computer?

  Windows speech recognition is only available when the language of the operating system matches the language of Windows speech recognition. You can change the language of the operating system by installing a language pack from Windows Update. If you install the language pack for a supported language of Windows speech recognition, you can then use Windows speech recognition to this language if it is also the language of the operating system.

  Refer to this article:

  Windows speech recognition language must be identical to the language of the operating system in Windows Vista
  (Also applies to Windows 7)

  You can use speech recognition in another language if a MUI language pack is installed for one of the supported languages. 35 MUI language packs are no longer available
  in the Ultimate and Windows 7 Enterprise editions.

  See the following article:

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  I hope this helps.

• Speech recognition - recognition language is not language User Interface problem

  I want to get Windows 7 speech recognition to work with British English, but I get an error after the training, that the language of the speech recognition is does not match the language of the user interface. I got the thing defined in the locale UK and speech recognition in British English. Several people have suggested:

  • Change regional settings, restart, change back again, reboot. Does not...
  • Turning off the box that says look at my documents. Does not solve.
  • make a Windows 7 reinstall. Can't do like no Windows 7 no install disc came with the PC.

  Can someone help me solve this problem? Where is the language of the User Interface set? Would - this something to do with Office 2010?

  There is anecdotal evidence that the use of like CCleaner registry cleaners can cause this problem.

  Speech recognition Windows 7 CCleaner
  http://Forum.Piriform.com/index.php?showtopic=21936

  Speech recognition could not start because the configuration of the language is not supported. The recognizer language must match the language of the user interface.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5ba2cf1b-E97D-46d7-924D-b14007581786

  Have you contacted the manufacturer of your machine to see what the repair and the machine has recovery options?  Maybe he has a hidden recovery that is quite common nowadays for the OEM partition?  This should be mentioned in the manual or on their Web site.

• "' Error of speech recognition: voice recognition couldn't start because the language configuration is not supported.

  OP: Windows speech recognition

  Hi, I have a Dell Inspiron 1545 with Windows 7. I just put in place the Windows speech recognition and finished the installation and the tutorial. I went to use and it says:

  Speech recognition error

  Speech recognition could not start because the configuration of the language is not supported.

  The recognizer language must match the language of the user interface. Please change the recognizer language in the speech recognition under Advanced options control panel.

  I don't know what that means, I tried changing the settings under:

  Control Panel > accessibility > speech recognition > speech Advanced Options

  But nothing seems to work.

  Help!

  Hello

  Saw this in another forum and it WORKS!

  Hello

  I had the same problem. Strangely, I had other symptoms. I use the Turkish keyboard Q primary and English as secondary United States. As my speech recognition broke down, I saw that my office word and outlook mulfunctioned in what concerns the language of the keyboard. I was able to use the Turkish Q keyboard on any application, but when I open outlook or word, changes in the English language.

  It happened on xp for... so I turned on the language bar to assign the TR when I am using these applications. But the language bar never himself displayed on the bar of tasks or office. So I get this problem and I saw that you can solve this problem via regedit.

  go to computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  right click on the right and a new "string value" component name value can be by default, the value data must be set to "ctfmon" = "" CTFMON. "." EXE ".

  After that I restarted my machine and the language bar came to the taskbar. I went into applications and changing the language to TR. And there was a surprise for me. Speech recognition long gone was back at the top of the screen. (I tried everything that proposed that nothing worked)

  I'm not sure but maybe the difference in language between applications caused my problem. Or maybe ctfmon has caused. Try this one.

  I hope that this is the case for you and you can fix it too...

• Getting started with speech recognition problems

  I tried to use speech recognition on windows 7 but it does not recognize the new device (headset) and tells me that the language of the English of the United States, recognition does not match the language of the user interface.  Could be a missing driver and how do I get it installed.  I never had problems with windows to recognize a new device until I tried to use speech recognition.  I don't understand why I'm having a problem with the language; It will allow speech recognition to open so that I can use it.  Both are these problems related to a missing driver or could there be another reason?

  I tried to use speech recognition on windows 7 but it does not recognize the new device (headset) and tells me that the language of the English of the United States, recognition does not match the language of the user interface.

  To see what recognizer is to be used, speech recognition, open in the Panel. Click Advanced in the upper left corner of the word. Make sure that the language drop-down list Microsoft speech recognition for English system.

  To set up your microphone:

  • Right click on the speaker icon in the taskbar to bottom left. It looks like this:
    
  • In the menu when you right click the speaker, select recording devices.
  • Make sure that the microphone you use (USB, with analog connectors or built into the computer) is set as the default value.
  • Speak into the microphone. The counter to the right of your microphone volume must move up and down like you're talking about. If it is not the case, click on properties, then on levels and level to about 75% of the value.

  To learn more about WSR, do a search engine search for:

  Marty

• change the language of the speech recognition from Chinese into English

  Hello.

  I am trying to use speech recognition in English in windows 7 (home). The language of the operating system is in Chinese.

  When I try to change the language of the speech recognition, I find only Chinese but not English. Is there a solution to this?

  Thank you.

  Hi boji lam.

  Thanks for posting your query in the Microsoft Community. According to the description of the problem, you want to change the language from Chinese to English speech recognition.

  I'll help you with this problem. I suggest you follow these steps.

  (a) click Start, Control Panel.

  (b) click on clock, language and region and then clicking regional and language options.

  (c) select the appropriate language and region.

  (d) and then restart the computer and check.

  You can read this article for more information:

  Set up speech recognition

  I hope this helps. Let us know if you need help with Windows.

• Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

  I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

  Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

  I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

  Is there a solution to this problem yet?