Problem of Vista Premium update

Similar Questions

• Can I save on all windows vista premium updates that failed?

  I am using windows Vista Premium, as mentioned above, and I have updates that have failed up to two years.  I started with 'SP1' and I migrated to "SP2" despite the large number of updates failed.

  I also have a large number of chess updates for Office 2007 and a few others.  I should probably mention that my original Vista Acer drive has been moved (probably lost).  I'm operating a valid OS despite self made. and manuals windows license verification work.  In the end, it seems that these updates failed eventually cause problems.
  Translate... Can I just start their withdrawal in reverse order?
  Please advise, I'm at whits end!
  Greetings to all,
  mddocoh

  Means failed, that updates have not been installed; so there is nothing to remove.

  You could try to reset the update components and see if that helps

  http://support.Microsoft.com/kb/971058

  Otherwise after the problems you are having. Maybe someone can help you.

• Solving problems with the installation of the Vista Premium updates: how updates to go?

  Update of security for Microsoft Office Excel 2007 (KB973593)

  I was not able to install one of the following dates.  The error message is 646.  I even talked to Dell technical support and they say that my Vista operating system is corrupted.  I do not believe them because there is a problem of software Microsoft they said to restore the system each time back to the factory settings.  I really hope that someone can help you.

  Update of security for Microsoft Office Outlook 2007 (KB972363)

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  Update of security for Microsoft Office System 2007 (KB972581)

  Update of security for Microsoft Office 2007 System (KB973704)

  Update of security for Microsoft Office System 2007 (KB974234)

  Update for Microsoft Office InfoPath 2007 (KB976416)

  Update for the junk e-mail in Outlook 2007 (KB974810) filter

  Update for the junk e-mail in Outlook 2007 (KB976884) filter

  Update for Microsoft Office Word 2007 (KB974561)

  I did the following to try to set:
  1 downloaded FIX
  2. Firewall disabled
  3 adjusted the settings in the Windows Update program

  Help, please!
  ExecutiveVA

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Problem of Vista SP2 update

  I have Vista SP1.  After you install SP2, the system did not come to the top and had to run restore to earlier date.  What can I do?

  Hi MTMOM3,

  Follow the troubleshooting steps in this document to solve the problem of black screen.

• Problem CS5 Design Premium update

  Hi, I tried to update my CS5 Design Premium, but whenever I try what happens:

  What can I do about it?

  Thank you.

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• my windows vista premium automatic windows update has disappeared... .Please someone help me...

  my windows vista windows update automatic premium disappeared when I go into Control Panel and click on windows update, a window opens and he said: 'that the page failed to load"and I can't access windows update at all... every Tuesday when microsoft releases the windows Automatic Update icon appears in my start bar in the box programs running to the right , but when I click on it nothing happens and when I right click on nothing happens either... its windows as update has disappeared from my computer... automatic or other... I even tried to restore the window at an earlier date and it did not help... Please someone help for is no error message it just will not load...

  Hello

  References for Vista also works on Windows 7.

  Updates page is closely related to IE - look for something blocking.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• problem installing vista Home premium service pack 2

  I recently had a hardware crash, had to reinstall the operating system, i.e. Windows vista Home premium with service pack 1 (32-bit) who came wth the system. Later, I tried to update the operating system, but the thrown error was 'WindowsUpdate_80080005 '. I tried to download vista sp2 on microsoft site, and when I tried to install it, it threw an error mentioning as casastrophic error E_unexpected(0*8000ffff). How can I update my windows vista Home premium with Service Pack 2?

  I tried the options listed below
  • tried to update via windows update, it threw an error "WindowsUpdate_80080005."
  • tried to install it by downloading the sp2, it threw an error E_unexpected(0*8000ffff)

  Please answer

  BR
  David

  Hi, DavidDarse,

  0 x 80080005 indicates that there is a problem of access denied with the Background Intelligent Transfer Service (BITS) security descriptors.

  1. don't you make changes on the computer before the show?
  2. When you receive this error message?
  3 update you trying to do?

  Method 1: Run that fix the following:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  If the problem persists, then try to set up your computer in a clean boot state and then try to install the update to windows.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Download the file and save it to your desktop

  Close all windows and applications

  Right-click on the file and select run as administrator to run the installation process.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Have you tried a system restore before the second error?

  http://support.Microsoft.com/kb/2732500

  FixIt MS: 0x80000FFFF error Code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Problem message 66 a updated windows and performace error on Windows Vista

  Original title: windows update error

  I have problems to download windows updates.  I bought new spyware, PC unleashed and already have Norton. I tried everything I could think of to fix this.  I changed the settings, cleaned records etc. nothing works.  Considering that I know almost nothing about IT, I'm there winging.  My computer is Windows Vista Home Premium, 32-bit.  It's a gateway bought about 2 years ago.  He sometimes stops for no reason (no blue screen of death again).  I am desperate to solve this problem, but reluctant to take it to a computer repair store.  I tried Microsoft Fix Center several times and tried different repairs but still nothing.  Don't know what happened but suddenly, the computer is slower and updates do not work.

  I'm afraid to do too much fear I may damage my computer or worse.  I received the error 66 has time and time again.  I have received various messages which have failed since April but didn't know it was because my computer was always a small icon of security under the start menu that tells me to stop and install the updates so I could do this after I was using the computer think he was installing updates , but obviously none of them.  Now I can't even count how many updates have not been installed.

  Due to the scans, I have ran, it was said that my computer has high speed, a lot of RAM etc... but I have problems of instability.  It makes me wonder if it's something personal! Laughing out loud

  I would appreciate any assistance available.  Thank you.

  Robin

  Hi Robin,

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Follow the steps described in the section below and then check if it makes a difference

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  Method 4: check the logs in Event Viewer for more details on the shutdown problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• I installed Windows Vista Premium, what update of software operation or the command to download Microsoft Office

  I'm looking to download and install Microsoft Office 2010.  My operating system is Vista Premium.  Attempt Office 2010 download, I get a message that the software will not download because I need different software Windows operating.   Do I need to buy a new software operating system; So then what?  Or is there a method to allow the download and usage of Office 2010 with Vista Premium?

  On Saturday, February 18, 2012 21:53:59 + 0000, GeraldEphault wrote:

  I'm looking to download and install Microsoft Office 2010.  My operating system is Vista Premium.  Attempt Office 2010 download, I get a message that the software will not download because I need different software Windows operating.   Do I need to buy a new software operating system; So then what?  Or is there a method to allow the download and usage of Office 2010 with Vista Premium?

  There is no problem with Office 2010 Windows Vista. The only one
  possible incompatibility, I can think is that you have 32-bit
  Windows Vista and you try to put Office 64 bit on it.
  Ken Blake, Microsoft MVP

• Problem with Vista update - 'Realtek RT8168... "killed my internet connection

  As part of my routine that Vista updates, I've updated "Realtek RT8168B/8111 Family."... »

  After the restart, I had no internet connectivity.

  The problem was "Realtek RT8168B/8111 Family PCI - E Gigabit Ethernet NIC problems hardware or driver.

  I followed the suggestions for updating drivers & system told me that my drivers were OK

  I am really at a loss

  Intel core i7, vista 64-bit, the card mother Gigabyte GA-EX58-UD5

  Hello

  The problem is that this update was probably older than you had installed. Use the system restore
  and after restart go in Windows updates - updates available - just right-click on it and HIDE. Best
  to never use the driver updated in Windows Updates - manually look.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===========================================

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT

  RTL8168B - it's later pilot and newer that you have (and this bad update)
  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=5&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false#RTL8111B/RTL8168B/RTL8111/RTL8168
  RTL8111C/RTL8111CP/RTL8111D (L)
  RTL8168C/RTL8111DP/RTL8111E
  RTL8105E

  --------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• After using Firefox it will not - I have to re-boot (OS = Vista Premium))

  I have Firefox version 25.0.1 and my OS is Vista Premium. My first use of Firefox works normally and correctly. However, after I used Firefox and closed the web page, if I try to go to another link, I get a message that Firefox is still open and recommend that I close Firefox or restart my computer.
  I'm unable to close Firefox and start Task Manager does not indicate that it is running. The only option that I found works is to re-boot the computer which is annoying.
  I deal with a lot of confidential activities related to maladministration issues so I much prefer to use Firefox which I consider to be more secure than most or all of the other programs for internet use.
  I was afraid that one option may be that I am being hacked? (I doubt than that, but it must be in sudden possible reasons for the strange behavior of Firefox) I think that I've updated Firefox a week ago, which has not erased the problem described. I'm on Firefox in anonymous mode using security for the given reason. I recently edited "Cause & Effect" part 4 on organophosphates which was distributed to the United Kingdom; U.S..; The Germany and the India who says that passengers and military crew, personnel and air don't receive the correct treatment for toxic poison. But it's not an advertisement: the publication is free of the British Library. But the victims are many and I want to be able to work effectively to prevent more unnecessary deaths.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Reinstall Vista premium edition

  I have a new computer, clean my registry, and something has been deleted which was not supposed to.    Now, my computer accepts no updates at all. aid coulum says I need to reinstall windows vista premium to fix. Pretty simple.  problem is when I got my new PC out of the box, vista is already installed and the product key is on the side of my Tower. There is no disk that I can remember, and now I'm naïve what to do.    I really want to spend another $ 150, I don't have, something that I wouldn't really need. Is it possible to reinstall vista online if I can prove it is mine and noone elses?         Help, please!

  Most new computers come with a version of Vista recovery on a partition of your hard drive.

  You need to read the documentation that came with your computer to find out how to start the recovery.

  Normally you have to press a button or two while the computer starts up, then ask if you want to restore the computer to factory settings.

  Note If you do this will delete EVERYTHING on your hard drive (just what you put on the computer SINCE you bought it).

  If this is not available contact the company you purchased the computer turned off and ask them for a set of recorvery CD / DVD.

  One last thing.

  DO NOT PLAY WITH THE REGISTRY WHEN YOU DON'T KNOW WHAT YOU'RE DOING.

  In fact

  DO NOT PLAY WITH THE REGISTRY. FULL STOP.

• Help! I have HP Pavilion, Vista Premium. Computer does not start correctly because I tried to install SP1 after several procedures, as described below. hope you can help.

  Help! I have HP Pavilion, Vista Premium. I had problems with IE8, tried to download IE9, could not because of the system not supporting. Tried to download the SP2, but said no SP1 on the computer to reinstall. Tried to reinstall SP1... now computer begins.. .windows black page is loading files, corporation microsoft, hot flashes, blue screen, startup Repair box appears. Past by looking for problems, Microsoft windows - startup repair cannot repair this computer automatically. I send information about this problem (recommended) and asked to see the error. here: I hope you can help.

  Signature of the problem

  problem event name startuprepairv2
  signature of the problem 01: autofailover
  signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  problem signature 03:6
  problem signature 04:655374
  signature of the problem 05: corruptfile
  signature of the problem 06: corruptfile
  problem signature 07:3221225624
  problem signature 08:0
  signature of the 09 problem: unknown
  problem signature 10:1168
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hi magali,.

  Since starup repair fails, you can try perforiming a restore disc Windows Vista starting system and check if the problem occurs.

  For more information, you can consult the following articles.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  What are the system recovery options in Windows Vista?

  When you are able to boot into normal mode, you can read the following article and try the steps to solve the problem of installation of SP1.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  You can also read the following article and check.

  Learn how to install Windows Vista Service Pack 1 (SP1)

  Hope this information is useful.

• After having upgraded to Firefox 24 it now won't start at all after clicking on the icon. My OS is Windows Vista premium. It will start in safe mode.

  Upgrade to Firefox 24 and now nothing works at all despite uninstall it and reinstall several times and lose all my favorites etc. However, it does not start in safe mode. At first, I thought it was my Norton 360 Security, but after 2 hours in contact with them, I'm still in the same position. When I double click on the Firefox icon I see the moment where the cursor and then it disappears and nothing loads.

  My OS is Windows Vista Premium and I use Windows internet explore for the time.

  HELP Please!

  Thank you nellus91.

  I used the Microsoft Safety Scanner first, and it found nothing. I then used TDSSkiller and he found the problem.

  Problem solved.

  Thank you.