Problem of VN7 widi
Currently, I bought a G-78VM VN7 - 791 mainly for WiDi capacity, when I got there the Widi connected to my Microsoft widi adapter very well (I was really impressed). The VN7 came only with the 1 TB drive, so I have installed a Toshiba THNSNJ256G8NU SSD (same ACER uses the factory). After you have installed the SSD, I have re-installed victory 8.1 apps os and acer via the provided Acer recovery thumb drive for my model. Once it was back up and running, the widi did not work. I checked to make sure that all drivers are up to date and tried to connect to the three cards different widi, without success. When I 'add a wireless display' and select the device, the GUI says "follow the instructions on the screen", then the TV says "Log in now" MISTLETOE immediately said "that does not work, try again". Using a different adapter I got an error resulting from "Times up, your TV stopped waiting. It seems time instantly. It is possible that with the i7 cpu and a SSD drive that the computer is too fast and not giving the connection time for a handshake before expiring?
Matt
Yes, I did and thought that since I had a version greater than whats listed on the website I was good. On a whim, I down loaded the lower driver from the Web site (see 10.0.0.288) and installed. Now the Widi works great! Thanks for your help, if nothing else scratching my head a bit more difficult
Tags: Acer Laptops
Similar Questions
-
Problem connecting to wide-band cable WRT54G2 & Virginmedia
Hello
I just purchased & installed the router on my computer (Vista). After you follow the installation instructions provided via the installation disc, I have problems with my computer main cable connection. Whenever I turn on the computer, the router and the modem, I have no internet access. The only way I am able to fix is to use the tab repair the connection on the Linksys Easylink Advisor. After his diagnosis, that I am then able to connect. I hope I have so not to turn off the router/modem I can switch the computer off and then on again as often as I want to and will always have access to the internet. However if I then power off all three, i.e. computer, router & modem I lose connection and must go through the procedure of connection to repair again. This happens every time. I completely uninstalled my anti-virus (mcAfee), but this makes no difference. I also, if I bypass the router to connect the computer directly to the modem cable compatible internet connection via ethernet cable. So I guess that the problem must lie with the settings of the router. Have also tried the router/modem with another computer (XP) with the same results. Any suggestion would be appreciated.
Thank you
alexaia
Thanks, seems to have worked.
-
Dell XPS 9530 WiDi problem. No option "don't add a wireless display.
Hello
I have a problem with Intel WIDI.
I installed the latest drivers for HD 4600 graphics from the dell Web site
I installed the latest drivers network card and application on the site intel. Earlier I also tried to install the drivers from the Dell website.Intel WiDi application Update says that everything is ready for use.
In the devices Panel-> project I don't have no 'add a wireless display '.I can't install the latest drivers for the graphics card Intel HD 4600 because "not the manufacturer, go to the website of the manufacturer of your.
Why is it not this option? because they do not have the latest driver for graphics card?
ALREADY KNOW!
I had installed VirtualBox. When I uninstalled the virtual machine, I saw the opportunity to add the wireless display.
-
Problems with mail after upgrade
After the update from El Capitan with macOS Sierra my e-mail program does not stay open longer than 3 seconds. I have an end 2013 27 "iMac 3.5 GHz Intel Core i7 with 32 GB of memory.
Is there any solution for this or am I the only one having this problem?
Thank you
Bob
Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.
You can use the guest user or create a new user to test.
CREATE A NEW USER
Go to system-> Preferences, create a new user in users and groups.
Switch to the new user by logging incoming/outgoing or use the fast user switching.
You can skip connect with an Apple ID, unless you need to test apps to iCloud. Hit continue and then jump.
By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.
You still see the issue?
If Yes, then the problem is with your core files.
If not, then the problem is in your user folder.
-
DataGuard problems, bad to the log_archive_dest_2 port configuration
Hello! Thank you all in advance for your help and sorry for my English, I will try to explain as best as possible.
We have a dataguard.
It has two headphones, the ports are 1534 and 1544, but... someone changed their 1535 once there is and now I had to re-set up everything again.
The thing is log_archive_dest_2 at the elementary level is wrong, because it points to instead of 1534-1535. I tried to edit init.ora and restart the instance but it always points to 1535 again.
I don't know if this setting depends on the other, or there is a hidden configuration, I don't see
**********
Primary
**********
-----------------------------------------------------------------------------------------------------------------------------------------
tnsnames.ora
LICITARP =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1544))(HOST = server01g))
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server01))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = LICITARP)
)
)
LICITARR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = server02g. XXXXXX.es) (PORT = 1544))
(ADDRESS = (PROTOCOL = TCP) (HOST = server02. XXXXXX.es) (PORT = 1534))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = LICITARR. XXXXXX.es)
)
)
LICITARP. XXXXXX.es =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01. XXXXXX.es) (PORT = 1534))
)
(CONNECT_DATA =
(SID = LICITARP)
(SERVER = DEDICATED)
)
)
LICITARPG. XXXXXX.es =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01g. XXXXXX.es) (PORT = 1544))
)
(CONNECT_DATA =
(SID = LICITARP)
(SERVER = DEDICATED)
)
)
LICITARR. XXXXXX.es =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = server02. XXXXXX.es) (PORT = 1534))
)
(CONNECT_DATA =
(SID = LICITARR)
(SERVER = DEDICATED)
)
)
L_LICITARPG =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01g. XXXXXX.es) (PORT = 1544))
L_LICITARP =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01. XXXXXX.es) (PORT = 1534))
-----------------------------------------------------------------------------------------------------------------------------------------
Listener.ora
SID_LIST_L_LICITARPG =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
)
L_LICITARP =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01. XXXXXX.es) (PORT = 1534))
)
)
L_LICITARPG =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01g. XXXXXX.es) (PORT = 1544))
)
)
SID_LIST_L_LICITARP =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARP. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)
-----------------------------------------------------------------------------------------------------------------------------------------
parameters
My ora init settings:
LICITARP.log_archive_dest_1 ='location = "USE_DB_RECOVERY_FILE_DEST" ',' valid_for = (ALL_LOGFILES, ALL_ROLES)'"
LICITARP.log_archive_dest_2 ='service = "LICITARR.xxxxxx.es ', delay LGWR SYNC AFFIRM = OPTIONAL compression 0 = DISABLE max_failure = 0 max_connections = 1 reopen = 300 db_unique_name ="LICITARR"net_timeout = 30 valid_for = (online_logfile, primary_role)'" "
I start the database and when I show the parameters, log_dest_2 points to 1535, a bad port.
SQL > show settings dest
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
audit_file_dest string/opt/oracle/admin/LICITARP/adu
MP
/ opt/oracle/diag/rdbms/licitar string background_dump_dest
p/LICITARP/trace
core_dump_dest string/opt/oracle/diag/rdbms/licitar
p/LICITARP/cdump
db_create_file_dest chain
db_create_online_log_dest_1 string
db_create_online_log_dest_2 string
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_create_online_log_dest_5 string
db_recovery_file_dest string/opt/oracle/oradata/flash_reco
very_area
whole large db_recovery_file_dest_size 100G
diagnostic_dest string/opt/oracle
Log_archive_dest chain
location of string Log_archive_dest_1 = 'USE_DB_RECOVERY_FILE. '
Dest", valid_for is (ALL_LOGFIL
ES, ALL_ROLES)
LOG_ARCHIVE_DEST_10 string
service of string LOG_ARCHIVE_DEST_2 = "(DESCRIPTION = (ADDRESS
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
_LIST = (ADDRESS = (PROTOCOL = tcp
() (HOST = server02)(¡¡¡PORT=1535!!!)))
(CONNECT_DATA = (SERVICE_NAME = LI
CITARR. XXXXXX.es)(SERVER=DE)
DIQUE))) ', LGWR SYNC DISPLAY.
Delay of RM = 0 OPTIONAL compressio
n = DISABLE max_failure = 0 max_co
nnections = 1 reopen = 300 db_un
ique_name = "LICITARR" net_timeo
UT = 30 valid_for = (online_logfi
the, primary_role)
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
allow the chain of log_archive_dest_state_10
LOG_ARCHIVE_DEST_STATE_2 string ENABLE
log_archive_dest_state_3 string ENABLE
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
allow the chain of log_archive_dest_state_4
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
log_archive_duplex_dest string
log_archive_min_succeed_dest integer 1
standby_archive_dest channel? / dbs/arch
user_dump_dest string/opt/oracle/diag/rdbms/licitar
p/LICITARP/trace
SQL > show fal settings
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
string fal_client (DESCRIPTION = (ADDRESS_LIST =)
Address = (Protocol = TCP) (Host = FL
o5ora01) (port = 1534))) (CONNECT_
DATA = (SERVICE_NAME = LICITARP. XX
XXXXXX.es) SERVER = DEDICATED))
string fal_server (DESCRIPTION = (ADDRESS_LIST =)
Address = (Protocol = TCP) (Host = f
lo5ora02) (port = 1534))) (CONNECT
DATA = (SERVICENAME = LICITARR.) X
XXXXX.es) (SERVER = DEDICATED)
)
**********
Standby
**********
-----------------------------------------------------------------------------------------------------------------------------------------
tnsnames.ora
LICITARR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = LICITARR)
)
)
LICITARR
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
(CONNECT_DATA =
(SID = LICITARR)
(SERVER = DEDICATED)
)
)
L_LICITARR =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
LICITARR. XXXXXX.ES =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
(CONNECT_DATA =
(SID = LICITARR)
(SERVER = DEDICATED)
)
)
-----------------------------------------------------------------------------------------------------------------------------------------
Listener.ora
SID_LIST_L_LICITARRG =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARPG. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARRG. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARPG_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARPG_DGB. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARRG_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARRG_DGB. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)
SID_LIST_L_LICITARR =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARPG. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARRG. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARP_DGB. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARR_DGB. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)
L_LICITARR =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
)
L_LICITARRG =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1544))(HOST = server02g.intranet.XXXXXX.es))
)
)
LISTENER_LICITARR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
SID_LIST_LISTENER_LICITARR =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)
-----------------------------------------------------------------------------------------------------------------------------------------
parameters
SQL > show settings dest
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
audit_file_dest string/opt/oracle/admin/LICITARR/adu
MP.
/ opt/oracle/diag/rdbms/licitar string background_dump_dest
r/LICITARR/trace
core_dump_dest string/opt/oracle/diag/rdbms/licitar
r/LICITARR/cdump
db_create_file_dest chain
db_create_online_log_dest_1 string
db_create_online_log_dest_2 string
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_create_online_log_dest_5 string
db_recovery_file_dest string/opt/oracle/oradata/flash_reco
very_area
whole large db_recovery_file_dest_size 100G
diagnostic_dest string/opt/oracle
Log_archive_dest chain
Log_archive_dest_1 string LOCATION = USE_DB_RECOVERY_FILE_
DEST OPTION REOPEN = 300
LOG_ARCHIVE_DEST_10 string
service of string LOG_ARCHIVE_DEST_2 = "(DESCRIPTION = (ADDRESS
_LIST = (ADDRESS = (PROTOCOL = tcp
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
() (HOST = server02)(PORT=1534)))
(CONNECT_DATA = (SERVICE_NAME = LI
CITARR. XXXXXX.es)(SERVER=DE)
DIQUE))) ', LGWR SYNC DISPLAY.
Delay of RM = 0 OPTIONAL compressio
n = DISABLE max_failure = 0 max_co
nnections = 1 reopen = 300 db_un
ique_name = "LICITARR" net_timeo
UT = 30 valid_for = (online_logfi
the, primary_role)
log_archive_dest_3 string
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
allow the chain of log_archive_dest_state_1
allow the chain of log_archive_dest_state_10
LOG_ARCHIVE_DEST_STATE_2 string ENABLE
log_archive_dest_state_3 string ENABLE
allow the chain of log_archive_dest_state_4
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
log_archive_duplex_dest string
log_archive_min_succeed_dest integer 1
standby_archive_dest channel? / dbs/arch
user_dump_dest string/opt/oracle/diag/rdbms/licitar
r/LICITARR/trace
------------------------------------------------------------------------------------------------
If I tried that I managed to enter sqlplus in both nodes
[oracle@server01 admin] $ sqlplus "sys/YYYYYYY @(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = server02)(PORT=1534)) (CONNECT_DATA = (SERVICE_NAME = LICITARR.» "((XXXXX.es)(SERVER=DEDICATED) (CID = (PROGRAM = oracle) (HOST = server02)(USER=oracle))) as sysdba.
SQL > select status from v$ instance;
STATUS
------------
MOUNTED
[oracle@server01 admin] $ sqlplus "sys/YYYYYYY @(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = server01)(PORT=1534)) (CONNECT_DATA = (SERVICE_NAME = LICITARP.» "((XXXXX.es)(SERVER=DEDICATED) (CID = (PROGRAM = oracle) (HOST = server01)(USER=oracle))) as sysdba.
SQL > select status from v$ instance;
STATUS
------------
OPEN
I always get this message, where PORT = 1535 is incorrect, and the correct port is 1534:
Message
--------------------------------------------------------------------------------
R.XXXXX.es) (SERVER = DEDICATED)))'
LGWR: Impossible to archive log 2 thread 1 sequence 162530 (12514)
ARCH: Starting to check in thread 1 sequence 162529 (13127536-13127548)
ARCH: Completed check-in thread 1 sequence 162529 (13127536-13127548)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'
LGWR: Impossible to archive log 3 thread 1 sequence 162531 (12514)
Message
--------------------------------------------------------------------------------
ARCH: Starting to check in thread 1 sequence 162530 (13127548-13127555)
ARCH: Completed check-in thread 1 sequence 162530 (13127548-13127555)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'
LGWR: Failure to archive journal 1-wire 1 sequence 162532 (12514)
ARCH: Starting to check in thread 1 sequence 162531 (13127555-13127565)
ARCH: Completed check-in thread 1 sequence 162531 (13127555-13127565)
Logging of 12514 errors received on the eve
Message
--------------------------------------------------------------------------------
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'
LGWR: Impossible to archive log 2 thread 1 sequence 162533 (12514)
ARCH: Starting to check in thread 1 sequence 162532 (13127565-13127570)
ARCH: Completed check-in thread 1 sequence 162532 (13127565-13127570)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'
Message
--------------------------------------------------------------------------------
LGWR: Impossible to archive log 3 thread 1 sequence 162534 (12514)
ARCH: Starting to check in thread 1 sequence 162533 (13127570-13127575)
ARCH: Completed check-in thread 1 sequence 162533 (13127570-13127575)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'
LGWR: Failure to archive journal 1-wire 1 sequence 162535 (12514)
ARCH: Starting to check in thread 1 sequence 162534 (13127575-13127582)
Message
--------------------------------------------------------------------------------
ARCH: Completed check-in thread 1 sequence 162534 (13127575-13127582)
Logging of 12514 errors received on the eve
256 selected lines.
Those for alert and new PORT = 1535 when he is wrong, since the correct port is 1534:
***********************************************************************
Fatal OR connect 12514 error, connect to:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=server02) (PORT = 1535)) (CONNECT_DATA = (SERVICE_NAME = LICITARR_DGB. XXXXX.es)(INSTANCE_NAME=LICITARR) (SERVER = DEDICATED) (CID = (PROGRAM = oracle) (HOST = server01)(USER=oracle)))
VERSION INFORMATION:
AMT for Linux: Version 11.1.0.7.0 - Production
Protocol TCP/IP NT to Linux adapter: 11.1.0.7.0 - Production Version
Time: November 10, 2011 18:56:42
Tracing not lit.
AMT error struct:
NS main err in code: 12564
AMT-12564: TNS:connection refused
NS secondary err code: 0
NT main err in code: 0
NT secondary err code: 0
NT OS err code: 0
***********************************************************************
Fatal OR connect 12514 error, connect to:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=server02) (PORT = 1535)) (CONNECT_DATA = (SERVICE_NAME = LICITARR_DGB. XXXXX.es)(INSTANCE_NAME=LICITARR) (SERVER = DEDICATED) (CID = (PROGRAM = oracle) (HOST = server01)(USER=oracle)))
VERSION INFORMATION:
AMT for Linux: Version 11.1.0.7.0 - Production
Protocol TCP/IP NT to Linux adapter: 11.1.0.7.0 - Production Version
Time: November 10, 2011 18:56:42
Tracing not lit.
AMT error struct:
NS main err in code: 12564
AMT-12564: TNS:connection refused
NS secondary err code: 0
NT main err in code: 0
NT secondary err code: 0
NT OS err code: 0
I have recreated the password file in the primary and copy it to the secondary, after that I restarted both cases, but nothingNo sense to me. Do you have a rebuild on my system and was not able to reproduce.
At this point, I would like to grep for the problem (change of wider path if necessary)
grep 1535 -R /opt/oracle/*I hate when it makes no sense. There must be somewhere.
Best regards
mseberg
Subsequently
I was thinking about it more. If you have a data broker, they can change the database settings. Any change of this?
I see this in your settings file that supports this theory
*.dg_broker_start=TRUEAny set of values in Data Guard Broker wins the spfile parameter. So no matter what you the SPFILE and PFILE broker file overwrites.
How to remove safely a Data Guard Broker Configuration [261336.1 ID]
Or modify the 'StaticConnectIdentifier' proposal the data broker. See doc Oracle E17023-04
"6 scenarios using the DGMGRL command-line Interface"
Example of
DGMGRL> edit instance dg112i2 on database dg112i_prm set PROPERTY StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.11.225)(PORT=1555))(CONNECT_DATA=(SERVICE_NAME=DG112I_PRM_DGMGRL.au.oracle.com)(INSTANCE_NAME=dg112i1)(SERVER=DEDICATED)))';Published by: mseberg on November 11, 2011 13:53
See data physical custody shall 11.2 primary RAC RAC standby using a second network [1349977.1 ID]
-
Sierra out subscriptions to calendars Apple
MacOS (10.12) Sierra seems to have broken the SUBSCRIPTION of the calendar between platforms feature. I cannot subscribe to the calendars from Apple of my wife, nor can she sign up for mine. Furthermore, I do agree is more a calendar from Apple using the Outlook of Microsoft 365 calendar nor can I subscribe to a calendar from Apple to Google Calendar online help. Here are the functions I used frequently week last under OSX El Capitan to update my students in my history class the AP world on the events of the class on multiple platforms. Even when you try to send an invitation to calendar by text or e-mail from an iPhone 7 (iOS 10.0.2) in another iPhone 7 (iOS 10.0.2) the phone cannot subscribe to the calendar invitation. I confirmed this problem with a specialist in the Apple Support. Anyone else having these problems? All solutions?
I'm not having problems with my calendar. Subscribe to a calendar and I also synchronized Exchange calendar.
Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.
You can use the guest user or create a new user to test. Make sure you have your Apple ID and Exchange passwords.
CREATE A NEW USER
Go to system-> Preferences, create a new user in users and groups.
Switch to the new user by logging incoming/outgoing or use the fast user switching.
Sign in with your Apple ID. Only check calendar for this test.
By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.
You still see the issue?
If not, then the problem is in your user folder.
-
Finder-> sharing of Mail or Notes does nothing
I have the MacBook Pro (retina, 15 inches, mi 2014)
It used to work before but not sure when it stopped updating of OS X El Capitan its launch if upgrading the origin of the problem.
Here are the details:
1. open Finder
2. right click on a file (an image or text file) and click on share
A list appears as a form of share options
3. by clicking on the Mail or Notes or any other option does nothing
4. after clicking on the option, the Finder disables other options also
And I need to restart the finder because it stops to change records and by closing the window also.
5. I tried to run the following to reset, but did not work
/System/Library/frameworks/CoreServices.Framework/versions/A/frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister-tuer - seed
Can someone help to solve the problem?
Thank you!
Post edited by: neeerajs
Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.
CREATE A NEW USER
Go to system-> Preferences, create a new user in users and groups.
Switch to the new user by logging incoming/outgoing or use the fast user switching.
You can ignore the signature with your Apple ID, unless you want to test iCloud
By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.
You still see the issue?
If Yes, then the problem is with your core files.
You can try running the updated Apple combo. Often, it will fix weird questions.
Update of OS X El Capitan 10.11.6 Combo
https://support.Apple.com/kb/DL1885
If not, then the problem is in your user folder.
Try to remove the com.apple.finder.plist in the user's Library/Preferences folder.
Restart then check. You may reset some of your preferences after deleting this file.
-
2016 staff Word dictionary is full.
I'm posting this question here, because I do not have the answer in the Microsoft forum.
Everyone becomes a complete dictionary in Word 2016? Now, when I try to add words to my dictionary, I get this dialog box:
I am now on my sixth personal dictionary. None of them works. No one at Microsoft knows what to do about it.
I post here in case someone here has the answer to this problem.
If you want to see the entire thread on the Microsoft site, it's here:
It could very well be a bug. I see that Bob Jones has helped you. He is a Microsoft MVP for years, and I would trust his advice. Since he mentioned that he has never seen this before, it tells me it's a bug.
The only other suggestion I could suggest would be to put the language.
• Open a Word document. Click on the word > Preferences • Under the Authoring & proofing tools, select spelling and grammar • Click on the button dictionaries next unrolling of personal dictionary. • Select a language (English or any other language you want to use) • Click OK. Quit word. • Restart Word • Try adding a new Word to the dictionary. If this does not work...
I suggest that you test in a new user. This will quickly tell you if the problem is system-wide or if your user folder that contains the problem.
You can use the guest user or create a new user to test.
CREATE A NEW USER
Go to system-> Preferences, create a new user in users and groups.
Switch to the new user by logging incoming/outgoing or use the fast user switching.
By default only the applications Apple will be in the dock in the new user. Go to Applications to open Microsoft Word.
You still see the issue?
If Yes, then the problem is with your core files. (this would indicate a bug in Word)
If not, then the problem is in your user folder.
-
Photos does not work in El Capitan
I recently replaced with El Capitan Yosemite on my Mac Mini last 2014. Everything worked well after the original download, including Photos. Then I closed the computer and went to bed. When I started again this morning, the system does not start, and I had to use recovery mode to reinstall El Capitan. 13 hours later (for some reason that the software took so long to download) the system works again - but not photos. Unlike other Photos post-EC problems, I get no message, just a bar with almost all the options greyed out. One of the few non-grisé options is under the tab 'windows', where, by selecting 'Photos', I get a white box. And that's all. I tried to start clicking on both of my two libraries - nothing. I tried from Photos with the option key - touch nothing. I tried from Photos with maintained command - nothing. All my photos, apart from those of Photostream, stored locally; I have all my pictures on iCloud, and nor do I want to. I'm sure that they are all there, because the library of the main image shows 36 concerts and everything is backed up, but I don't know how to access. Any help much appreciated.
All my photos, apart from those of Photostream, stored locally;
Where your photo library is stored? It's in your pictures folder, or on an external drive?
I tried from Photos with the option key - touch nothing. I tried from Photos with maintained command - nothing.
try to find out if the problem is system-wide or only happens in your user account.
Can you launch Photos, if you connect from a different user account, for example the guest user? (see this help page: isolate a problem by using another user account)
- If Photos does not even from another user account, your relocation was unlikely. Try to reinstall again with a stable network connection.
- If pictures work well from another user account, delete the preference files in your Home folder.
Remove these items from your user library in your folder:
- Delete complete files - if they are there-
~/Library/containers/com. Apple.photolibraryd /.
~ / Library/Containers/com.apple.Photos/.
Log and turn it back on. The files will be recreated when you try to launch again the Photos. But don't try without a current backup of your system!
Your user library can still be hidden. To reveal the hidden user library:
- Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
- Select your folder user/home (with the House icon in the side bar of the Finder)
- With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
- In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
- Open your folder, then the library folder, then the containers.
- Move the entire folder ~/Library/Containers/com.apple.Photos/ on your desktop. Move the entire folder, not just the content.
- Delete ~/Library/Preferences/com.apple.Photos.plist Similarly, if it exists.
Restart the mac, after you have deleted the items, then try opening your photo library and see if pictures will now launch properly.
-
Windows tried to update it for two days and failed. MY PC crashed and after release on the road and tried to update again, I got the blue screen. Tried but has not yet. Any ideas?
Perhaps your question is not the same.
Have you thought that your problems are more wide spread, for example the virus/malware.
See the PA Bear response to this topic concerning the hijacking etc.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/2c213e8d-729f-4343-9831-7059e34519f6
TaurArian [MVP] 2005-2010 - Update Services -
Envy 14-K074CA touchscreen: 10 - touchscreen Windows Envy 14-k074ca
I have a HP Envy 14-K074CA Sleekbook touchscreen.
I am currently run ning on Windows 8.1 but want to upgrade to Windows 10.
Then jeutiliser the ability my computer WIDI laptop a lot and do not want to lose it with this upgrade.
My question: is there a problem with using WIDI and Windows 10 on this model?
Or are there other serious issues I would meet with this upgrade?
Thanks in advance.
Rudi
Rundl
new 10 with Intel drivers windows supports WIDI
have you found the drivers Windows 10 for the system ?
My advice, wait until February
-
Relocation of miniport network extended wan windows 7
Hello
I'm having a problem with my wide area network wan IKEv2 VPN miniport.
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
6.1.7601.17514 driver version.
I tried uninstalling and reinstalling but it never uninstall. I disabled and enabled, but it still does not work. Can I use 3rd party VPN software if I can't get this to work? Any suggestions would be greatly appreciated.
Thank you
John Duran
Hello
Please follow the steps below.
Method 1: Please run the hardware and troubleshooting of device by using the link below. http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: Please try to update the chipset drivers using the link below.
WARNING OF THE BIOS:
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
This device cannot find enough free resources that it can use (error Code 12)
Original title - drivers on Windows 7 Ultimate DVD
Hello everyone, I hope you can help me...
I have problems with a wider view when I attach a second monitor to my laptop (HP ProBook 6550 b). Talk to HP Help Desk, I was told that I need to install drivers that are on my DVD of Windows 7 Ultimate. My problem is that I can't locate these drivers (likely).
Does anyone know where Microsoft has placed these drivers on the DVD, or if you have a better solution for my problem. I can only clone my laptop monitor and do not get the enlarged view. I need to work on two screens.
Help, please!
Brutium
Hi all
I would like to respond to each of you, but I don't know how to do.
In any case, I found the solution for my problem online, and I hope that other users will find useful as I did. Here are the steps I followed:
1. in the Device Manager , I turn on the Show hidden devices under view
2. I've expanded the peripheral system
3. I have uninstalled the driver, also deleted the drivers for the three (3) I found the bodies called parent resources
4. I uninstalled the two (2) cases called AMD PCI Express (3 GIO) filter
5 restart the system.
Everything works fine now.
Once again I thank you all for trying to help me solve my problem. I really appreciate the help!
Brutium
-
Hi all
just now and with collaboration with Cisco I m right change a network client from the depths. A question was raised on the benefits of changing a core of 6500 to a core of firewall in the backbone of the network. I ve had my doubts about put a firewall in the middle of the network and with the 6500 just for the L2.
Can someone give me some arguments for using a firewall to this customer base?
PS: The customer as many users
Hello
The design with a basic firewall is one who loves a lot of safety engineers.
However the design could easily meet the credentials of a smaller network but a large network with lots of flow and loads of sessions, the advantage of safety could have the disadvantage of the cost high in both the material and the man hours.
in many cases, society has 'only' the new guarantee of an access list and good policy.
In this case, you may be able to do both.
The 6500 has a firewall blade
I came across this in many cases where they just want to have control over access between networks, but I've never used the 6500 Slide since it was just overkill for the task at hand.
So what are the advantages and disadvantages
Firewall kernel
PRO
Excellent control over the traffic that comes and goes in the network
VPN can be used internally
Good security
Lack of support from the protocols
Disadvantages
Costly in both equipment and man hours
Risk of becoming a bottleneck (Slow/news sessions/s)
Don't like the large stream through it.
Lack of support from the protocols
Switch/router Core
PRO
Transmission capabilities excellent traffic
No problem with the wide-open spaces of data such as backups
Multi protocol solutions
Cost of devices
Disadvantages
Fewer security features? less control in network
By the way more different types off of protocols which can avoid safety devices
And then we have a third option
Kernel firewall collapsed
A kernel with firewalls in the junktions and a heart of switching / routed
Pros
A realistic way to safety in a wide network with flows multigig over large areas.
Several units that gives if you pause cannibalizes the network in another place if you need to be to always follow the important parts.
Disadvantages
Can be an absolute nightmare to manage if it is not tightly controlled since the beginning
Number of units
many change points.
Good luck
HTH
-
Issue troubleshooting, driver and keyboard.
Hello
I troubleshoot-made my Windows 8, detected these issues as follows.
Miniport (Network Monitor) Wan #2 has a driver problem
Miniport (Network Monitor) Wan #2 has a driver problem
There is a problem with the wide AREA network (Network Monitor) #2 Miniport driver. The driver must be reinstalled.
Reinstall the device driver Completed Problem with the PnP devices
Problem with the PnP devices
There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.Detected
Update of Windows configured to never install drivers
Update of Windows configured to never install drivers
The driver updates are not installed automatically when detected by Windows Update.There is no question Problems found Details of detection 6 Miniport (Network Monitor) Wan #2 has a driver problem Not fixed
There is a problem with the wide AREA network (Network Monitor) #2 Miniport driver. The driver must be reinstalled.
The device informationName: Miniport (Network Monitor) Wan #2 ID: ROOT\MS_NDISWANBH\0001 Error code: 31 Reinstall the device driver Completed There is a problem with the wide AREA network (Network Monitor) #2 Miniport driver. Reinstall the driver may resolve this issue. Problem with the PnP devices Detected
There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices. Potential problems that have been verified Details of detection Update of Windows configured to never install drivers There is no question The driver updates are not installed automatically when detected by Windows Update. Solve problems with a USB device Can someone help me solve these problems?
Thank you
Arif Bellah
Hi Arif,
Thanks for the reply.
Are you facing any problem during the installation of Windows updates? If Yes, do you have any error codes?
Method 1:
I suggest you to download and install the latest Chipset driver on the manufacturer's Web site and check if it helps.
http://us.gateway.com/GW/en/us/content/drivers-downloads
Method 2:
I suggest you to use Visual keyboard to type the password on the login screen and check if it works.Use the keyboard to the screen (OSK) to type
Method 3:
If the issue occurs when you use the keyboard on the screen, this could be a problem with the keyboard. I suggest you to connect an external keyboard and check if it works.Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
Maybe you are looking for
-
I was struck with the dreaded full disk boot error message. I have a hard disk of 500 GB solid state. Disk utility, I opened, and he said I had about 44 GB of free space. If this should not be sufficient? In any case, I deleted my Aperture libraries
-
Connection problem of my new (5 s) iphone to itunes on mac - error pops up on the computer saying a newer version of itunes required, however my itunes is already updated to the latest version (11.4)
-
How does one can restart an iPad and empty its contents before syncing again with an apple mac?
-
How to change the display mode screen landscape
original title: screen display my 1 year old has done something to my computer and now when I start it up to the top of the screen is in landscape mode.
-
I recently bought a Clip and then bought an e260. When you use the 260, I realized that a lot of features that the Clip has miss him, and I really liked that some of them, even if they are not all that important. I realize that Rockbox adds... probab