Problem of WiFi with the Xperia M4 double Aqua

Similar Questions

• I can not access to sites such as Youtube or truckcam.tv it seems that the problem may be with the most recent Adobe flash and firefox as browsers further

  Question
  I can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows 7

  See:

  • https://support.Mozilla.org/KB/Flash-113-crashes

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  Hi placebow,

  Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)

  The setting applies not only at the office, but also in other areas of the shell.
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

  My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?

  I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.

  I disabled the Nvidia because it seems to me that Photoshop is not supported.

  Hey Mohit and other colleagues!

  See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

  I hope that helps for a while this problem.

  Best regards.

• Problems with WIFI with the Bold 9700 blackBerry Smartphones

  My daughter recently bought a Bold 9700 and has problems with the help of the feature wi - fi.

  It seems to connect OK to our wireless router, but the performance is pathetic & often give up entirely. It's so bad, she renounced the use of a wi - fi connection and must now connect via 3G. Obviously it's costs downlaods, plan and money, then I'll try to trouble shoot why wi - fi works so bad.

  I ran the diagostics wi - fi and connection details are below. However I do not know how to interpret it and what other things to check. The report of wi - fi and other details on the phone & rtouter that we use is below. BTW all of our other wireless devices work correctly through the router.

  I hope someone can help.

  Thank you

  Dog_Breath

  Wireless diagnostic report

  Security type: pre-shared Key (PSK)
  Signal level:-53 dBm
  Data connection speed: 54 Mbps
  Status: Acquired network

  Modem

  Billion 7404

  Handset

  BlackBerry® 9700
  Smartphone (3G, Wi - Fi)
  V5.0.0.743 (Bundle 1254, platform 5.1.0.165)
  3G bands 1,4,8
  The kernel v3.8.5.85 encryption
  Brand version: 1.0.70.695I
  The micro Edition configuration: CLDC-1. 1
  Micro Edition profile: MIDP - 2.1
  Micro Edition JTWI Version: 1.0
  Micro Edition Media Version: 1.1
  Micro Edition PIM Version: 1.0
  Micro Edition file Version: 1.0
  Edition micro Bluetooth Version: 1.1
  Micro Edition location Version: 1.0.1
  Micro Edition Security and Trust Services (APDU) Version: 1.0
  WLAN Version: 2.7.0.84

  Thank you all.

  It took a while, but I finally managed to update to OS 6 and wifi is now humming along nicely. I was getting a lot faster than forward speed.

  Certainly looks like my version of the OS 5 was the problem.

• Problem with the display resolution double

  I connect to my laptop to a TV with a VGA cable. The TV has the ability to display up to 1920 x 1080. Normally, my laptop display mode is 1280 x 800. When I connect to the TV as duplicate display my laptop switches to 1024 x 768 and won't let me come back to 1280 x 800. How can I fix this. I need dual extended display or tv only is not an option. I need a way to have my normal screen (1280 x 800) resolution when you are connected to the tv (external monitor).  I know that this is not a problem with the VGA cable because I get a resolution of 1920 x 1080, if I select external display (tv). Thanks for your help! Someone else has a solution for me?

  Hello

  I suggest you to update the video card driver and check if it helps.

  Follow the link below and check if that helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: If the drivers are not updated, I suggest you to download the drivers from the Manufacturer Web site'w and install it then.

• Problem with the movieclip by double loop

  Hello, this is more a problem of logic programming that actually a problem with the code.
  
  I'm building a schedule where each month are built on the fly with the movieclip duplicate for each day (with an empty textfield). I am building the calendar according to the number of days of the month has, he begins to what day of the week, etc, etc..
  
  Then I load an external xml with the new arrivals. Subsequently, I need to check the days of this month were new. At the moment I have 2 parts in stock in my xml stream ( http://s50699.gridserver.com/xml/news_en.xml). It all works very well.
  
  However, I only manage to highlight a day of this month, the last news item-, which means that the loop runs twice, but he recorded only the last number, so the day highlighted that shows on the calendar, is, therefore, of this last point news.
  
  I attached the code below and will be really grateful for any help or general advice.

  _root ['dot' + s] does not know he has a report any with the number i after the advances of your loop. in particular, by releasing _root ['dot' + s] I'll be the last value of your loop.

  to remedy this, use a variable that stores the value of i when _root ['dot' + s] is created:

  .Ivar _root ['dot' + s] = i;

  and use this.ivar rather than I in your onRelease handler.

• Possible problems with the database in double training?

  Hi all!
  
  First of all, please forgive my ignorance! I only worked with databases slightly over the past two years and so far only with MySQL and MS SQL.
  
  Recently, the company I work for bought a new Oracle requiring package. We bought a copy of Oracle 10.2 in the case and the company who resell it to us and set up for us, we have been denied access to the database on our server, dev because it would expose their underlying data schema. I wasn't in the change when the decision was made and we have spent money on a paralyzed copy of Oracle, but it's in the past.
  
  Because we have not dev access to Oracle, we are unable to create a database of training for this new software in the home. We pay this company to create a test environment for us. I was told that it would cost $500, until technology has said it will install Oracle on the server of our training.
  
  At this point, I stopped him and said $ 500, they'll be violating their license agreement, or by giving us a free copy! The other possibility is that they were going to install this and then just this law we for Oracle, despite citing the work at $500.
  
  Technology that was about to proceed with the installation went to check with someone of higher rank and then returned to inform me that install the second copy of Oracle would require license more fresh indeed.
  
  This verified what I already told him, and I said, we want a database on our existing Oracle server and copies of the new training software can just point to this training base.
  
  He must now take time with senior technicians while they "analyze the existing database server or the environment. He was trying to tell me to install a database on the existing server and rather buy another copy of Oracle, which seems to me to be a total drain cash. He had no solid reason why it could not do, but refused anyway and said he needs to talk to a senior technician (the same one who said that Yes, we you will need to purchase a second copy of Oracle instead of using a second database on the existing server).
  
  Thus, these two bases of data, data from phase one and the other a direct duplicate of these data used in a training environment where change will not be being reported should, however, be able to exist peacefully should they not? The same version of the same software to access the same data from the server, just an another database, should not be a problem with my limited knowledge of the Oracle! There are still connections in the environment of training may 5 at the time, and the server must be able to manage currently twice more than the logged in users as is the maximum current (edit: expected) load.
  
  I know that this would not be a problem with MySQL or MS SQL and Oracle is a superior database package, then someone can think any legitimate reason that can back up the assertion that having this duplicate database will be a problem?
  
  Thanks in advance for any guidance here!

  It is certainly possible to create a second instance of the database on the same server as your production system. We have several servers with multiple instances. If you follow this path, there are a few things that you should keep in mind.

  Every Oracle instance must have little memory assigned from the RAM server to host the CMS, PGA and other process oracle. Each instance must have sufficient disk space to accommodate files data temporary tablespace, rollback segments etc. Depending on how you plan to implement your training environment, this could potentially be equal to your production environment memory requirements and the disc. If you plan to have a smaller subset of data for purposes of training, then you could probably get with much less than your environment of production.

  Another possibility would be to create another schema in the database of existing production to use for training purposes. While this would need less additional memory and space drive that uttering a completely separate database, it could have an impact on your production system, since the training environment would be sharing resources with the production.

  None of these scenarios would need additional licenses to Oracle (assuming that you have either licensed CPU, or that production and training combined have fewer users you have named user licenses).

  John

• Problem of airtime with the same SSID

  I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz.

  Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I don't have problem to play AirPlay on any device. I had the same SSID when so I can use wifi roaming without having to change the SSID whenever the other signal weakens.

  When I put two (router & AP) with the same SSID, Airplay icon will not be displayed? But if I put a different SSID to one of the two, airplay icon is back. Channels are on ch.1 (router) and ch.11 (AP). Someone knows how to set up?

  UPDATE:

  Disable NAT in fact access point the AirPlay icon always appear but he cannot yet play through my APR.

  * all updates *.

  12.4.3 iTunes

  Windows 10 updated, firewall offshore

  Marantz 1506 firmware update

  always put iPhone to update to the latest version

  The routers are also updated to its latest firmwares

  What I believe you are describing is a network expanded through repetition, the Apple TV does not work well with repeaters. Try a different configuration.

• connection problem of data with the support of mobistar (Belgium)

  WiFi works. Data connection isn't.

  The signal 'H' or 'E' is highlighted. I tried with the parameters of android and iphone Mobistar Belgium Web site and with all types of authentication. But it is impossible to connect.

  I will try with a sim card from another carrier and let you know.

  In the meantime, does anyone know if there are any specific APN settings for mobistar.be?

  Hi yellowtrolley,

  Thank you for reporting this issue. Please try the following to the APN settings I found on this site nd make sure your specific device supports the following frequencies:

  • GSM 900/1800 (2G GSM) net
  • W CDMA 2100 (3 G UMTS)

  The APN settings:

  • username: mobistar
  • password: mobistar
  • Name of the APN: web.pro.be

  You can also try this page if you need more specific parameters.

  Please let us know if this solves your problem, or if you have other questions about your Firefox OS device.

  Thank you!! =)

  -Ralph

• Geolocation has stopped working in Firefox 24 after update (Win7 64). Downgraded to FF 23.0.1 solved the problem. Even with the other installation of FF to another PC.

  Visit this page: https://developers.google.com/maps/documentation/javascript/examples/map-geolocation or any other website using geolocation to track my location shows a blank map and no prompt "share location: allow, block, not now."

  This has happened since upgrading to FF 24 (Office Win7 64). Decommissioning of FF 23.0.1, solves the problem: FF before 24 supports geolocation without problem. Tried in my desktop and laptop with separate FF, using different plugins installations.

  Thank you in advance.

  [NOTE: now using Firefox 23.0.1, the problem does occur only after upgrading to Firefox 24]

  Uninstalling Firefox completely from my laptop and install it again, solved the problem.

  I have not yet tried with my office.

  The laptop uses whereas the ethernet office wifi. The problem exists in the installation of the laptop FF 24 too, so I don't think it was the root of the problem, at least in my case.

• HP 2000: Problem connecting Wifi with HP 2000

  I have a laptop HP 2000 used recently. I was able to connect to my WiFi at home, but drop it and saying 'Limited connection' or 'no. Internet Connection. I have the latest drivers for my network cards.  Could it be caused by a faulty Wifi card? Could I get a replacement for the wifi card?

  Hello @cost63,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the WiFi problem and wanted to help you!  I understand that you can replace the WLAN Module.

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  HP - products customer support

  It is possible that the WLAN Module may be faulty.  If this is the case, according to the model of your laptop, the WLAN Module should be replaceable.  But first, we'll see if the problem is software partner.  Try to review these steps, proposed by members of the community

  @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Compaq Presario desktop XP-problems connecting / came with the settings and files of the previous owner

  My Director ex-chorale of the Church and his wife (was his computer) moved to Minnesota and gave me this Compaq Tower and the monitor speakers.  She cleaned me all of hers off the coast.  Well, she didn't.  She switched to the network connection and modem.  I'm low on memory.  Help support & the beginning, Compaq support and connections says "unable to connect to the server."  I have fast Internet with Comcast cable.  His modem is Gegere or something and the network connection is RealTek 97 Fast family and mine is Arris (modem).  Specifications of the computer:

  XP Edition family c. 2002 SP3

  Compaq Presario Intel inside Celeron (R)

  CPU 2.53 GHz

  248 MB of RAM

  CD player works but the DVD player does not open.  Connection is so slow that it takes 5-10 minutes to open anything.  IE8 gets constantly "stops responding."  Just like Firefox.  When you try to close a window or stop start, end the program box comes back and comes back again and again.

  Went to start-help & support-Compaq help and did some tests.  For Audio, etc. get: "Exception in DisplayRunMap.runmap.

  Only had this computer for 2 weeks and did nothing to save.  Can reinstall Norton Security Suite for Comcast and my Microsoft Professional 2007 from a cd.  Thought to do the system recovery.  This OS came with Compaq and recovery CD system recovery option and there is F - 10 System Recovery on initialize toward the top.  Are they the same?  I first have to install Windows XP on a bunch of CD?  Can't make a DVD if the drive does not open.  The button is loose and nothing happens.

  I am 63 and security social disability so can not afford a new computer, or to hire a technician.  Help, please!

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  The 'F10' and Compaq system recovery of Windows XP system recovery are the same thing. You don't need to create "HP recovery discs" before making a recovery, but you may need these disks at a later date. If a set of disks has already been created, you will not be able to create a second series and you may need to buy a game from a third-party vendor.  With the complete model number name and/or product will allow us to direct you to a place to buy these records, if necessary.

  Please click the White Star of KUDOS to show your appreciation

• Connection Officejet 6100 to Wifi with the Mavericks

  I have Mac OS 10.9.2 (Mavericks) and have installed all available updates.  I just bought a HP Officejet 6100.  The configuration software supplied with the printer does not work on the Mavericks.  I can use the printer via USB, but have no idea how to do to connect the printer to my wifi network.  All the instructions I found point using the diskette supplied with the printer (not compatible with the Mavericks) or assume that I already connected the printer to my network wifi (which is the problem that I am trying to solve).

  I had HP products in the past and if it is connected to the network, but it supports WPS and has a touchscreen user interface.  This printer does not seem to be supported.  The wifi light just keeps blinking.

  I don't like on ePrint, etc..  I want just the printer connected to my wifi so I can print from any number of computers on this network.

  Help, please.

  Thank you

  It wasn't very nice, that we were just trying to help.  Don't tell you specifically that your router has WPS.

  On your printer, press and hold the button wireless for 3 seconds.  Within 2 minutes, press the the router WPS button.

  Wait about 2 minutes. If the printer connect successfully, the wireless light will stop blinking but stays on.

  From there, you can connect your printer on your Mac:

  -Go to System Preferences > print & Scan
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.