problem on the charge of

Similar Questions

• problem, plug the charger on my Zire

  I have an old Zire I used for about 10 years.  I think that I made a mistake and tried to put the needle in the hole for the battery charger. The result is that the charger is not 'connect' to the Zire... and the Zire tells me that the battery is low.  All the world had this problem?  Is there a solution? I really wouldn't want to lose all the data I have stored more than 10 years!  What's a guy to do?

  The male part may have broken free of the motherboard.

  Removable instructions (courtesy of Directfix.com)

  http://www.DirectFix.com/category/_ZIRETAKE.html

  WyreNut

• Z50 - 75 crashes when the charger is disconnected after 10 Windows update

  Currently using a laptop Lenovo Z50-75, and after that put to upgrade to Windows 10 my computer will display an error "thread stuck in device driver" as soon as he starts the menu start when my charger is disconnected. So my computer is pretty much rendered unusable. I think that this could be a problem with the charger driver, but I'm not sure. Does anyone have a suggestion on how to fix this?

  
  

• I have a problem with the adapter plugged in, but do not load with pavilion dv6 3050 tx

  I bought a new pc hp laptop pavilion dv6 3050 tx a few days before, 1 day I m facing a problem on the charge. I put my laptop on the pricing but maximum time show connected does not support. kindly help me. Is - this prolem with battery or ac adapter or software problem. Please suggest me a solution.

  Hello

  The adapter block should be able to cope with weak variations in the power supply, so I doubt, however, there is a problem with your electrical network - only an electrician would be able to confirm it for you by testing the circuits of power supply to your property.

  Regarding overheating, there is a circuit in your notebook that interrupts the battery when it detects that it is at full capacity, so this shouldn't be a problem.

  Kind regards

  DP - K

• When blackBerry Smartphones to plug the charger in BB it charges is more the phone; port does not connect

  I have a Blackberry 8100 model.  When I plug the charger in the Blackberry, the loading icon does not appear on the screen and the phone is not loaded.  If I wiggle the charger port of entry in the phone cable, sometimes it will connect and charge the phone.  This has happened with my first Blackberry to the point where the connection to the port is actually right out of the device, permanently attached to the cable.  At that time, the phone was under warranty and my provider sent me a replacement phone.  Now the same thing is happening again.

  The phone is no longer under warranty and my provider said I have to buy a new phone.  However, the phone and all features work correctly, I can't charge the battery because of the problem with the charger port is loose.  Any suggestions on how I can fix the connection to port or otherwise fix this?

  I got my port of loading fixed to the www.cellphonefixed.com they are based in Seattle, WA and repairs by mail for cheap across the United States.

• EasyNote tj65 makes noises when the charger is connected

  Original title: easynote tj65 annoying when noise plug charger

  According to the title, anyone know how to disable?

  Hello

  1. Since when you are facing this problem?

  2. have you received a notification, to consider replacing your battery?

  3. have you made changes on the computer before this problem?

  I suggest you follow the steps.

  Turn off the PC speakers and check if it helps.

  (a) right click on its icon in the taskbar and go to playback devices.

  (b) select the speaker , and then click Properties.

  (c) go to the levels taband Mute (or you can reduce it) PC speaker and check.

  If you still hear the noise, I suggest you to contact the manufacturer of the computer as it might be the problem with the charger.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Equium L40-156 - problem with the battery or the charger?

  Hi all, I'm new here and have a question about my laptop.

  My laptop does not turn on when I play and hold the thread at the back of the laptop where it charges and I have to hold it in place while the laptop charge upwards and once I connected, is that after a matter of a few minutes (if there are that) it says low battery and stops.
  Is it my battery in the laptop that has disappeared or is it the charger adapter?

  Any help is appreciated, thanks.

  Hey,.

  Of course it is not easy to say which is the reason why, but according to your announcement, there seems to be problem AC adapter.
  I mean just start the laptop when you place the cable in place and if Windows starts up, it says low battery, so it s not charging but in the worst case, it could also be a malfunction of the motherboard.

  So if you can get a new power adapter you should test. It s worth a try! ;)
  ?

• Plug the charger into the problem

  Hello world

  I'm having a problem with my laptop HP 2000-369WM of charge. When I try to plug my charger, the red light indicating that the load and the battery on the screen indicator does not change.

  I'm trying to shake the cord, but it will take a while before it recognizes.

  Do I need to get a new charger, or who will count in all and it is a problem of laptop?

  Thanks for any help.

  Hello ophelialie,

  Welcome to the HP Forums!

  I understand that no loading is ongoing, and there is a flashing red light. Jiggling to work should not have to do. There is probably a hardware problem, but I'll do what I can to help you!

  First of all, try the steps I provided in this thread, as they will probably solve the problem if it is not a hardware problem: Re: battery charging

  If not, please try test and calibrate the battery. You should be able to know if the battery has problems, as the battery of tests should be carried out.

  If none of this helps, you should be able to contact HP telephone support and will determine what to do with the material. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns, and if it has helped. Thank you for choosing the HP Forums. Have a great day!

  Mario

• Problems to start the iPad after the charge.

  I have left the iPad charging outside the area during the night and have had start-up problems. I have a screen black and white and on pressing them and holding the sleep/home button an image of a battery. I release the buttons and finally after pressing the buttons, I get my home screen indicating a 100% charge. Has happened twice in the last few days when I greeted the battery power to reduce to 5%. My question is - this problem occurs when the battery power is authorized to reduce equal to or less than 5% before recharging or is the battery dying and requiring a replacement?

  Without knowing at what age the iPad is, it would be difficult to blame it on the battery dying. I never let my battery get too low before I reload them iOS devices. In fact, I put my Air 2 iPad and iPhone 5s on the charger all night in order to get a full charge overnight. I use the iPad all day at work, so I need to reload or to take the charger and cable with me, I prefer not to do. I prefer to load the day after.

  Why don't experiment you a little and do not let the unit run as low. Maybe that load when it gets to 25% left and see if that makes a difference.

• [Z510] Problems with the battery not charging

  I have ideapad z510 for almost a year. and now my unit still shows that it is at 0% battery. and she indicates that she battery level does not increase. and for this reason I could not use my unit when it is not plugged. What should I do about it?

  Comment to Moderator: New thread is created. The topic is edited to include the model.

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• LaserJet Pro 200 color MFP: print problems when you use the charger

  Copy and scan works very well when I place the original on the glas

  However, if I use the charger a straight black line appears from the top down in the middle of the copied or scanned document.

  How can I fix

  Thanks, MariusMo

  Hi MariusMo,

  I'm glad that the problem has been resolved with the cleaning.

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

• Problem saving PNG of the charger

  Well, I'm trying to save a png file I have loaded using charger of the internet.

  Here is the code:

  ...
  public var TempImage:BitmapData;
  ...
  var loader:Loader = new Loader();
  var url:String  = new String('http://myurl.com/image.png');
  ...LoadImage();
  function addLoader():void{
      addChild(loader);
  }
  function LoadImage():void {
      var urlReq:URLRequest = new URLRequest(url);
      loader.contentLoaderInfo.addEventListener(Event.COMPLETE, loader_complete);
      loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, loader_err);
      loader.load(urlReq);
      addLoader();
  }
  function loader_complete(evt:Event):void {
      var target_mc:Loader = evt.currentTarget.loader as Loader;
      var TempImage1:Bitmap = Bitmap(target_mc.content);
      TempImage = TempImage1.bitmapData;
      target_mc.x = (stWidth - stWidth) + 15;
      target_mc.y = (stHeight - 15) - 165;
  }...Button Code for Save button...
  function SAVE(e:Event):void{
      file = new FileReference();
          var SaveString:String =- new String('myImage.png');
      file.save(TempImage, SaveString);
      file.addEventListener(IOErrorEvent.IO_ERROR,saveError);
      file.addEventListener(Event.COMPLETE, Complete);
      file.addEventListener(Event.CANCEL, Complete);
  }...
  

  Image (loader) is added to the step successfully, the SaveString works fine, I have access to the system using "access_shared" files, record the quick works...

  The problem is that the recorded image (TempImage) contains no data, I tried countless variatioins to get the charger in a 'temp' image data, but without success.

  Any ideas?

  I found a solution based on my own earlier application code.

  I used PNGEncoder to encode the TempImage in the service RECORD before the real economy.

• I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I pressed the f1 key to continue, then my laptop recharges normally.