Problem: PI 2.1 cards and APs investment

PI2.1 (2.1.0.0.07) was installed last fall and had maps of ground at the time of the questions.

So now, I floor maps and have placed the first on in the buillding.  Now, I'm just placing on the plan of the HA.

I can 'place' on the map but when I go to save, I get an error message

"Once these settings can cause the radio to reset if the gain of the antenna on the NCS is different from that set on the controller.  (This caveat does not apply to the standalone AP)

and they are not saved even if I do not click on OK

When I go back to look at the map of the PA are not there.

Tried using Internet Explorer and Chrome with the same results.

The card is a .gif that was imported file.

Any thoughts?  About to dive into the pages of docwki.

you have 2.1.2 patch installed? If this is not the case, then install it as it has almost 10 map corrections.

Tags: Cisco Wireless

Similar Questions

  • Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

    I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

    It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

    How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

    You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Problem with the video card and satellite L650 - 1 M 6

    Good evening!
    I have the new Satellite L650 - 1 M 6 with no operating system. When I did a fresh install of Windows 7 32 bit, I had several device problems. Most of them that I managed solve my self (as wlan drivers) but now I need your professional help.
    At this moment, I had left this problem of devices (on the information system):

    Not available ACPI\TOS6205\4 & 4A257CF & 0 the drivers for this device are not installed.

    I think it might be the video card (must be ATI HD5470) but SysInfo says:

    Type available, compatible adapter (Standard display types)
    Description Standard VGA Graphics Adapter adapt

    Would appreciate any help on this.
    Thank you in advance.

    Hello

    As I see you as laptop without OS and you try to install and configure your own operating system.
    In many posts, I wrote here that I write again and again that the most important thing is to install all the drives and Toshiba specific stuff according to the order of installation right then, here's the order of installation for your laptop model:

    Win7
    TOSHIBA Assist 3.00.10_O
    TOSHIBA Extended tiles for Mobility Center Windows V1.01
    Synaptics Touch Pad Driver 15.0.8.1
    Realtek 6.1.7600.30111 card reader
    V2.0.0.6 TOSHIBA HW Setup Utility
    V2.0.0.3 TOSHIBA supervisor password utility
    TOSHIBA Web Camera Application V1.1.1.15
    TOSHIBA HDD_SSD 3.1.64.6 attention
    SW 9.1.1.1024 Chipset installation utility
    Intel Management Engine Interface 6.0.30.1203
    Display driver
    Driver Intel Turbo Boost Technology 1.1.1.1007
    Driver Intel Rapid Storage Technology 9.5.7.1002
    Conexant Audio Driver 4.119.0.61
    TOSHIBA value added package 1.3.3_64
    LAN driver
    TOSHIBA Software Modem 2.2.97 (SM2297ALS05)
    Driver for Conexant Modem 7.80.4.50
    Battery Bluetooth for Windows by Toshiba v7.10.10 (T)
    Wireless LAN driver
    ConfigFree 8.0.29

    I recommend reinstall you Win7 and continue with all the other stuff flowing this install order and I hope everything will be OK.

  • Problems with the graphics card and games (World of Warcraft)

    Packard Bell IPower x2.0, NVidia GT130, when playing World of Warcraft, sometimes system stops screen goes black and the computer does not respond to any imput switch simply disable manual mode, pilots are the last and no other problems with other programs. Thank you

    This just started happening, or has it always been the case with this game?

    Have you tried:

    http://us.blizzard.com/support/article.xml?locale=en_US&articleId=21622&parentCategoryId&pageNumber=1&categoryId=2334 ?

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Problems with the graphics card on Satellite Pro M10

    Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

    I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

    This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

    1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

    2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

    3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

    4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

    5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

    I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

    Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

    see you soon,
    Cozmo

    Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

    Hi Cozmo

    I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

    In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

    Sorry Cozmo but I do not see any other logical solution for you.

    Good luck!

  • I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do?

    I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game

    You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.

    (142394)

  • iPad2 and problem with the SIM card after update

    even after the 9.3.1 last updated continuously having problems with SIM TIM card network.

    I changed and I tried with another SIM card but the problem remains.

    I did have all those problems with 9.2.1.

    Apple could intervene and solve these problems? Otherwise, I think it's better to make a return to the old 9.2.1.

    Thank you

    Do you see the network? and is it strong enough?

  • Big problem with m40 129 (memory and sd card)

    Hello
    A week ago I bought the last m40 129 of the saturn store in Düsseldorf, Germany. Because I speak not German I formatted the laptop and installed my version of prof. under ms Windows XP license. After installation, I was checking the system information and I discovered that system memory is 512 MB! After you have installed all the drivers and the service Pack 2 of xp memory count has not changed. I checked the bios, it is always the same.
    The other problem is the sd card slot, even I installed the necessary drivers, it does not work. As I'm living, in the Netherlands, I don't know what to do. Please give help.
    Nice look

    Hello

    As far as I know, the set comes with 1 024 MB RAM. Please check the specifications of the laptop. I hope that the aircraft was properly packed and you're the first person who opened the package. Otherwise contact the seller and try to check what can be the problem. You can also contact partner in your country, and they can check if there is some malfunction of the equipment.

    In my opinion that you n t need no matter what BIOS update. CD Tools & Utilities is not supplied with this unit. Each user must make one his. I hope you did a. The problem is that the drivers installation must be done in the right order. If you use the CD of tools there must be a description of how to do it on the right track.

    To use DVD-RAM, it must also be installed DVD-RAM driver. Like I said check the CD of tools if you have made a. There must be a single html file with explanation how to do this.

  • iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

    iPhone 5 activate without sim card and the problem is average insert a SIM card when sim carn as invalid sim

    Fast pleas tell me

  • Satellite A300-1NO - Player cards and SD memory card problem

    Hello!

    There are a few problems with the card reader built into my A300 1NO. If I put an SD (SD or SDHC) inside, he wants to recognize the cards as the XD memory cards. In Device Manager window is therefore a "Ricoh xD-Picture Card Disk Device" listed here, with a yellow exclamation point, and the card is not at all as by car.
    With Memory Sticks, there is no problem, the player manages them almost without problem.

    I tried reinstalling the drivers by running the installation program "Ricoh Card Reader", which is downloadable from the toshiba site, but it did not help.

    So what's next?

    Hello!

    Did you remove the old driver before installing a more recent?
    And you can format the SD card using the Toshiba SD memory?

    Normally, the card reader must be able to read SD and SDHC cards too. Have you tried the cards from different manufacturers?
    I use the SanDisk Extreme III cards, and don t have problem with these cards.

    Good bye

  • I have a problem with my location network cards and I can not find my LAN on my PC.

    I can't find my LAN

    Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

    Hello

    Perform the steps in the article mentioned below and see if the problem persists.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Hope this information helps.

  • SD card and sound problems problems

    Hi all

    I bought my Xperia Z2 probably 2-3 months ago and I must say that I love this phone.

    However, I came across a few issues that seem to be, is not so common that I can't find any solution online (this is why I'm here).

    I have 2 numbers:

    Issue 1:

    SD card problem, it's a funny that I was not able to identify what is actually causing this problem. Now it all started (or when I started to become aware of the issue) when I changed some settings in the camera app. I saw that he was recording pictures of "Internal memory" and since precisely, I bought a new SD card to the Xperia Z2, I wanted to save pictures on the SD card instead.

    So I changed storage SD card and everything is fine (at least, that is what I thought).

    After taking a few photos one day, I came home and wanted in preview mode, in the app photos and (Viewer Photo of Sony) Album, it shows that the picture is damaged or missing (in function that I use either the app). This really annoyed me the photos I took seems to be all lost or corrupt. So I tried to use a file (including file Commander) Explorer to find the file and open it, but it seems to have the same problem. I get the gray background with a picture of a mountain with like a bolt of lightning (sign of broken).

    As a result, I also tried to copy some video files on the SD card and it has been giving me problems too. I tried to copy videos on the SD card in 2 ways, first way is to remove the SD card, connect it to a SD card reader and plug that into the computer. After he finished copy on the SD card, the files would disappear just (I use computers a lot and it's very surprising and new for me... It's like the SD card has deleted the files right after that it has been copied, or maybe even 'hidden' files).

    So since this method did not work, I thought that I try to put the SD card in the phone and connect the phone to the computer then MediaGO from Sony (computer App) allows you to transfer videos and it worked sort of that time. I copied 14 videos on and only the first 2 videos work, the others are all "media is missing" or of some sort. I checked the format of the video and they are all either .avi or .mp4 which I think is a problem because the first 2 videos are in .avi so surely other .avi videos would work too? Don't think...

    Thus, it seems that I'm having trouble with the video and Photos on the SD card as music works fine 100%. Used Media GO to copy music on and it all works great.

    Some of you might suggest to format the SD card, I will say that I have... I tried the methods above before formatting AND after shape (formatting using Xperia Z2, or should I say 'clear').

    The SD card I have is 64 GB Sandisk Ultra (I bought this to anticipate the 4K or records video at 1080 p).

    If the issue here is compatibility with SD cards and I was stupid enough to not have seen that before, then I would be happy to admit that it is my fault and be happy that the solution would simply mean buying another SD card.

    But that said, I highly doubt that would be the problem due to the fact that the SD card is made for performance (not the best performance that the Extreme and Extreme Pro range are much better) and the card is new.

    2nd question:

    Now, this question is not as bad as the first question, is something to do with the sound. I understand that the phone has 3 sound controls, one for the ringtone for when you get a notification or / and phone call, one for the media and an alarm.

    What I do is I have ringer volume, around 50% and media will be dependent as I change when I open an application, but the problem I have had is:

    If I open an application (mainly from the games that has sound/music) and I change the media volume to say 70% or even 20%, whenever I get a notification, while the volume of application notification seems to be 100%, no matter what I do with the media volume. It's weird my volume of ringtone or the default Notification is sitting very low, around 50% or even if I change to 20%.

    What I'm missing here? Any thoughts?

    With 2 questions, last resort would be to factory reset my phone but will be willing to do if there is a good chance of the show is fixed.

    Your thoughts will be greatly received as right now I'm just confused and don't know what to do with the questions. Slowly, I get the feeling that I should just give up on the phone and use it for phone calls, music and forget the whole photograph taking which is very sad I like photo/video of the phone features.

    Sorry to hear you're still having problems with a new SD card

    You bought these cards a dealer known and reputable? It sounds a bit like false SD cards for me. The software I mentioned earlier will be able to demonstrate if an SD card is wrong or broken.

    If you think the phone is harmful somehow maps I recommend you to contact a service point for the phone checked. For more information on how to submit your phone for repair and where, contact your local support team.

  • Problems with the Precision M4400 and the graphic card Nvidia quadro 770M

    I have a problem with my Precision M4400 and Nvidia Quadro 770 M. After I installed Windows 7 64 bit, I have problems with the graphics card. I get a blue screen or graphic errors. I tried several versions of the driver. In the Nvidia forum had this problem even more. Here, they told me that only a BIOS update for the graphics card to solve the problem. Update the BIOS, but I should refer by DELL. So my question is this problem with Dell is also known, and there is already an update of the BIOS to the Quadro 770 M?

    Hi all

    I have the solution by chance. I was looking for the latest drivers GeForce for Windows 7 x 64 and I read the accompanying note: http://fr.download.nvidia.com/Windows/337.88/337.88-win8-win7-notebook-release-notes.pdf
    On page 17, you can read the following note to fix: "[GeForce FX 770 M] [portable]: blocking of the blue screen occurs after Windows starts."

    Of course, GeForce FX 770 M does not exist (and never was), and it should be Quadro FX 770 M. I can bet that nVidia has corrected this famous BSOD problem in the wrong driver because always there is nothing about any "Quadro FX 770 M - fix" in the note accompanying the latest Quadro (340.52) driver.

    You try the GeForce driver above, but to install it, you may need to download an INF file modified with the addition of the ID of Quadro FX 770 M (= "NVIDIA_DEV.065C ="NVIDIA Quadro FX 770 M"). Try without the first modified INF file because the Quadro FX 770 M is listed as a compatible chip in the version of the driver GeForce 337.88 note...

    I'll try that, even though I am completely sastified with the latest driver for Quadro (feasible) (285.62) without disable Powermizer. I did not try the latest Quadro drivers again (to be honest).

    Late me know please.

  • Problems pictures copies of Flash memory card and USB drive under Vista 64 files

    Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
    Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
    I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
    Thank you
    Srini

    Hi Srini,

    one) that you get specific error messages when images are arrested to copy?

    (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

    To narrow the problem, please follow the steps mentioned below:

    O copy the pictures manually on the flash memory card Office.

    O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

    O check if the photos are in double version:

    Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

     

    He may want to know:

    How can I get pictures from my camera to my computer?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

    Troubleshoot camera connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 8 pro with media center - Nvidia Geforce 8400 M G card and driver video problem or something else?

    Hi I have a problem with my Windows 8 pro with media center, my laptop has a Nvidia Geforce 8400 M G graphics card and driver crashes all the time also popups and windows menu has a black background, the only solution is a reboot, can you tell me what is a problem? Thank you

    Hi MAXUSVAN DERT.

    Glad to know that you have posted on the community of Windows 8.

    From your description, I can understand that you are unable to connect to Windows 8 pro with media center and you have a problem with installing the drivers.

    To install the drivers for Nvidia Geforce 8400 M G please follow the link below and check if the problem is resolved.
    http://www.nvidia.com/Download/index.aspx?lang=en-us.

    If the problem is not resolved, then try to install the drivers in compatibility mode.

    Follow the steps to install in compatibility mode:

    a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
    b. check the run this program in compatibility mode for: box.
    c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
    d. try to install the driver and verify.

    See also this link for compatibility mode.

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    Also try Nvidia Support - check with the support that she might be a known issue.

    http://www.nvidia.com/page/support.html.

    Hope the above information helps. If the problem is not resolved, please get back to us and we will be happy to help you.

Maybe you are looking for

  • Update 9.2 says updated requested on iPhone 5

    I am currently using version 9.1. I don't see where is the update for the 9.2. He shows me where is the update, but it let me just click on the button update. It is where the update button would be but it is faded and will not let me click on it. It

  • HP Pavilion Touchsmart 23 NO KEYBOARD not WORKING!

    Well, I called HP, Logitech, Microsoft, you name it.  I recently bought a HP Touchsmart Pavilion 23 at our local office depot.  When we started to install everything and realized that a dongle is not included with the keyboard and mouse.  I called Of

  • What is microsoft client protection?

    and why most of the sons ' unavailable?

  • C6280

    C6280 will not SCAN when it is set at 14 Touchsmart sleekbook running windows 8 (have not improved to 8.1). Old printer 4480 combo scans very well with the sleekbook.

  • Access to the network drive. Unable to drag files to USB

    I can see the files on the network drive, but when I try to drag the file to a USB drive it. He said that problem access the hard disk, but I can open the file on that...   Any ideas would be appreciated