Problem planning migration 4.0.1 to 9.3.1

Similar Questions

• Problem with migration SQL Server Oracle 11.2 2012 DB using SQL Developer Migration workbench

  Hello

  I have a problem when migrating SQL Server Oracle 11.2 2012 using SQL Developer Migration workbench, hope that someone had the same problem before and can give same advide...

  I use SQL Developer Version 4.0.1.14 and Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0. and last jtds - 1.3.

  I created the schema migration_repo, privileges, connected to the third part of Db (SQL Server) and begin a trial with assistant. In the first step of the model to Capture, I get the message from the:

  "Company Capture Capture failed.  Refer to the table MIGRLOG in the repository for more details ".

  But MIGRLOG is empty.

  Here is my log:

  <? XML version = "1.0" encoding = "windows-1252" standalone = 'no '? >

  < Log >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  < level > SEVERE < / level >

  oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil < class > < / class >

  < message > Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doOnlineEnterpriseCapture(FullMigrateTask.java:758) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doCapture(FullMigrateTask.java:601) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:400) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:314) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:147) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193) < param > < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ (RaptorTaskManager.java:554) < param > RaptorFutureTask.run < / param >

  java.util.concurrent.Executors$ (Executors.java:471) < param > RunnableAdapter.call < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615) < param > < / param >

  java.lang.Thread.run(Thread.java:744) < param > < / param >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@68e69a < param > < / param >

  < exception >

  < message > oracle.dbtools.migration.workbench.core.ui.FullMigrateTask$ FullMigrateTaskException: Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 758 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 601 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  line 400 > of < < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 314 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 147 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTask < class > < / class >

  < line > 193 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ RaptorFutureTask < class > < / class >

  < line > 554 < / line >

  < / framework >

  < frame >

  java.util.concurrent.Executors$ RunnableAdapter < class > < / class >

  < line > 471 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor < class > < / class >

  < line > 1145 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor$ Worker < class > < / class >

  < line > 615 < / line >

  < / framework >

  < frame >

  java.lang.Thread < class > < / class >

  < line > 744 < / line >

  < / framework >

  < / exception >

  < / recording >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  WARNING < level > < / level >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  <>error message: ORA-06550: line 1, column 14:

  PLS-00201: identifier ' SS2K5ALLPLATFORM. STAGECAPTURE' must be declared

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  : FAILED: Database Migration: FAILURE < / message >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@1e2c9b99 < param > < / param >

  < / recording >

  I try with model db (DB empty, just a single table), but the error is same. However, if I try to copy the acronym tabele from SQL Server to Oracle it works fine...

  I guess it's something with the configuration, but beacause I am new in Oracle still have no idea...

  Any help would be much appreciated

  I thank in advance

  Stefan

  Hello Stefan,

  did you create the repository Migration of your database to Oracle (Tools-> Migration-> repository management)?

  The SS2K5ALLPLATFORM package is usually created when you add the migration of the Oracle database repository and it contains the function StageCapture.

  So please make sure that you have created a repository of migration in an Oracle database and associate it with the first step of your migration.

  -Klaus

• SRM API: How to specify if the recovery operation must be planned migration or recovery after disaster

  Is it possible using the SRM API to specify whether we want a planned Migration or a recovery during failover?

  In addition, exactly how do we use the APIs AnswerPrompt and ListPrompts? Examples would be appreciated. Thank you!

  If you want to run the disaster recovery, you must use the recovery option (number 0) failover Mode. The SRM 5.8, we introduce a new Mode of recovery option - migration (planned Migration - number 5). This command is not added to the SRM API documentation, but will be updated soon.

  Example:

  PowerCLI > $RPmode = New-Object VMware.VimAutomation.Srm.Views.SrmRecoveryPlanRecoveryMode

  PowerCLI > $RPmode.Value__ = 5

  PowerCLI > $RPmode.ToString)

  > Migrate

  Orders ListPrompts and AnswerPrompt have nothing to do with the implementation of the plan (planned or disaster recovery Migration).

  -Daniel G.

• SRM - clean after planned migration

  This is likely to sound like a silly question. I'll ask anyway.

  Going to test our plan from Dr. Va recover our VMs to Site B, using migration planned in SRM option. Once recovered and all happy recovery was a success... are there disadvantages to just run the cleanup utility in SRM and then turn on the VMs back to Site without resecure? Know to throw in all the changes

  Or am I better run reprotect?

  Thank you

  Steve

  Steve

  As far as I know, you can run a 'clean' after a trial, not after a planned Migration or a complete restoration. The right way to bring the machines virtual live back on the original Site protected is to make a re - protect. This is a good exercise anyway and you can always do a Test before re - protect.

  I hope this helps!

• Problem of Migration 6.5 ALUI - Urgent :-)

  Hey,.
  I have a problem to migrate an ALUI application:
  
  In the portal, we have an APPv1 application, which contains several communities, pages, portlets, groups, etc.
  
  Now, I'll improve this APPv1 to APPv2, which will be added a few new features and made some changes.
  
  One requirement is that we keep APPv1 during the development of APPv2, so the first thing I have to do is to create a new directory objects Admin "APPv2" that contains exactly the same content as APPv1 and change all the names of the content (portlets, communities, etc.) within APPv2,
  
  at first, I used the copy to APPv1 operation and copy the text to the new APPv2, but then I found a portlet Web service cannot be changed, which means that even the new portlet in APPv2 refers always to webservice of APPv1,.
  
  So I maybe I can use Migration Import/Export to export the APPv1 first and then change it to APPv2 in anthor instance ALI and import APPv2 back, but I found that the APPv1 will be replaced by the new APPv2 :-(
  
  I was wondering is there another approach to do? Or something I did wrong?
  
  Thank you very much!!!
  
  Wen

  The replacement occurs because the UUID are the same in both portals (look at your table PTMIGRATION)... all the objects in the portal has a unique ID, and so when you import, if you are importing from 'the same' unique set, you're going to replace anything that has the same ID.

  Ross

• Problem of migration of Hyperion Planning applications

  Hyperion 11.2.3.502 with a few patches more

  OPERATING SYSTEM: AIX 7.1

  It is environment two server active/passive high availability where there are two servers and essbase foundation/planning and EPMA has a windows server

  We had the environment SSL enabled which we removed recently and now the environment is not SSL. We are able to connect to work space and run all of the components, but when we migrate any new request we receive following error. Can someone advise.

  [2016 01-06 T 07: 51:57.952 - 05:00] [FoundationServices0] [ERROR] [EPMLCM-30023] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS: com.hyperion.lcm.product.manager.WebProductManager] [SRC_METHOD: executePostMethod:722] HTTP Post execution error occurred while - "WebPlugin.getArtifactListing". Exception: Connection timed out

  [2016 01-06 T 07: 51:57.952 - 05:00] [FoundationServices0] [NOTIFICATION] [EPMLCM-13000] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS: com.hyperion.lcm.common.LCMLogger] [SRC_METHOD: journal] Service is currently not available.

  [2016-01 - 06 T 07: 51:57.955 - 05:00] [FoundationServices0] [ERROR] [EPMLCM-30045] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS:?] [SRC_METHOD:?:?] Unable to connect to ""http://load Balance: 19000/awb/lcm.executeAction.do "when executing application Explorer/list - 'EPM architect'." Receipt status code - 500 with error message - "runtime error HTTP Post has occurred then -"WebPlugin.getArtifactListing". "Exception: Connection timed out '

  [2016 01-06 T 07: 51:57.955 - 05:00] [FoundationServices0] [NOTIFICATION] [EPMLCM-13000] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS: com.hyperion.lcm.common.LCMLogger] [SRC_METHOD: journal] Service is currently not available.

  [2016 01-06 T 07: 51:57.955 - 05:00] [FoundationServices0] [ERROR] [EPMLCM-13000] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS:?] [SRC_METHOD:?:?] Service is not available at this time.

  [2016 01-06 T 07: 51:57.956 - 05:00] [FoundationServices0] [NOTIFICATION] [EPMLCM-13000] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS: com.hyperion.lcm.common.LCMLogger] [SRC_METHOD: journal] Service is currently not available.

  [2016 01-06 T 07: 51:57.956 - 05:00] [FoundationServices0] [ERROR] [EPMLCM-13000] [oracle. EPMLCM] [tid: 1] [username: < anonymous >] [ecid: 000002Tan72Bp2l5ovH7iY00GW7G00013Y, 0:1:4:3:3:3] [APP: SHAREDSERVICES #11.1.2.0] [URI: / work/login area] [SRC_CLASS:?] [SRC_METHOD:?:?] Service is not available at this time.

  The LWA is used only for internal goods traffic so that it is used in fields as FCL, if you remove the element of load balancer and point it to the web server (OHS), then it should show if it is related to the load balancing, I saw this error with the planning and LCM when there were questions type load balancer.

  See you soon

  John

• problems of migration between 4.0 and 4.1 and vpshere different server platforms

  I'm having a problem with my migration between vsphere 4.0 and 4.1.  to complicate matters, we are also migrating server chassis.   The migration of chassis is made for FT.  We discovered when planning for FT consultants, we used initially to configure the cluster FT, specified servers and chipsets that were not capable of FT.  They were Intel Xeon 53xx series.  I use the PowerEdge 2950 servers, those with the xeon 53xx was Gen2 and I am replacing them with PE 2950 Gen3 with proc Xeon 5430

  The problem, I'm running is now that I put in place a PE 2950 Gen3 in the cluster, I cannot vmotion for her.   Whenever I do, I get the following error:

  Host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register

  Bits of host: 0000:0000:0000:1000:0010:0000:0001

  required: x 000: x 0 0x0x:00: 0xx0:xx10:xx1x:xxxx:xx01

  Inconsistency detected for these features:

  * SSE4.1

  If possible, use a cluster with Enhanced Vmotion compatibility (EVC) enable: see article of the 1003212.  In the absence of EVC, see 1993.

  the thing is that I can't seem to activate CVS as options I selected do not include processors that I have in my servers.  all processor options don't list any of my processors.

  I tried seting the mask CPUID 1 VM and migration, which worked, but is completely unrealistic, because I have to stop every VM to do and some systems that need to migrate are essential.  I tried setting the mask corresponding CPUID at the host level and who does not at all.  I must have missed something simple or fell on a rather massive bug!

  help please!

  Then I suggest VCA as this will take care of him for you.

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• problem of migration of iMac iMac

  Last night, I started a migration of my old iMac that I bought yesterday after the failure of the screen on the old to the new. I had bought two cables Thunderbolt with him but had lost to them so I their connected via firewire in the former via a Thunderbolt to the new adapter. When I got up this morning, the progress bar window shows 18 hours and 44 minutes to go with a speed of 20 MB per second. I checked once again not long after and now it says more than 8 hours, and I think that the data transfer rate was around 30 mbs. Later, I checked and now he showed 24 hours to go and I don't remember the transfer rate. Then, I checked it was 48 hours go and, more recently, 66, transfer rate 6 mbs. Why change the data rates?

  Also, I found the Thunderbolt cables. I thought to cancel the migration and starting with Thunderbolt, but fear doing so could start a cascade of new problems. What will happen if I did? the data I transferred would remain? There are corruptions which would cause me problems? I would get any kind of dialog bar give me the option to ignore the already transferred elements? How can I easily determine what data was transferred at the time of the break, because it will probably be corrupted?

  It is a fairly urgent question. Any help will be appreciated. Thank you.

  If Cancel you the migration, then when you start you will get a second account migrated under a new name. If you have enough space on the disk and then once the migration is complete you can remove the incomplete user account. MY ends not an incomplete migration. It will simply ask provide you a new username for the account to be migrated.

• problems to migrate ReadyCLOUD account

  I have problems with an account is migrated in theory, but something has failed, when added to the nas, e-mail me the user continue to appear and not as old accounts.

  occurs only with an account

  Hello ceitix,

  I was told that these accounts cannot be deleted. Since that account name has no approved product from Netgear, then I guess it should be nice just to do not then use it with ReadyCloud and use a new one, that you created.

  However, I am still awaiting further responses to this topic.

  Kind regards

• Problems with migration from LabVIEW 2012 VBAI 2012.

  Hello.

  Someone had problems with the migration of the VBAI 2012, 2012 to labview?
  I'm filing this disadvantage when use migration in VBAI everything works fine, when I use LabVIEW with 'Vision Acquisition Express' for example, everything works as it should.
   
  The solution I've done has been to work with the control VBAI API and it worked perfectly, but I wonder, if a bug or a known error on this process.

  Thank you.

  Finally, I solved it by installing the "Vision Development Module 2012 SP1". With this update worked correctly migration.

• Problem with Migration hot virtual machines Hyper-V

  Dear support

  I am facing problem in Live Migration of Virtual Machine in Windows 2012 of Hyper-V R2 cluster. Here are the details for my current setup.

  Two windows 2012 R2 Datacenter even care Server (HV01 and HV02) both in cluster

  A Virtual Machine created the Volume share of Cluster (c:\Cluster storage\...)

  A network adapter dedicated to the management of server-> 10.0.1.11 (HV01) and 10.0.1.13 (HV02)

  A network card dedicated to Hyper v Virtual Machines-> 10.0.1.12 (HV01) and 10.0.1.14 (HV02) and allow networking option is disabled.

  A network card for the heart beats-> 10.0.20.1 (HV01) and 10.0.20.2 (HV02)

  A network card dedicated for Live Migration-> 10.10.10.50 (HV01) and 10.10.10.51 (HV02) and chosen to be used only for the live migration fails on cluster network settings

  I added the Virtual Machine Cluster Failover successfully without error or warning. When I do a quick migration his works fine but when I do live migration his error giving 21502.

  Please update what's wrong with my setup

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unpack problems email migration

  I just bought a windows system 8 and I am trying to move my files from 1 pc to another.  He said that there is a download of email migration.  When I try to download it says unzip the file.  When I do this it says file is unzipped but does not open.  He always tells me that to unwind.

  Hello

  I understand that you want to transfer files from one PC to another. I will definitely help you with this problem.

  (1) you receive an error message when you try to open the unzipped file?

  (2) is limited to a specific file or with other files as well?

  (3) have you made changes on the computer before this problem?

  I suggest you follow the steps in the link to transfer files from one PC to the other and check if it helps.

  Windows Easy Transfer moves the files and settings from one PC running Windows to another. It guides you through the process to choose how you want to move your thing and you want to move to your new PC, such as user accounts, files and folders, music, pictures, videos, email, contacts, Internet Favorites and settings of the program. And then it shifts everything for you.

  If you try to transfer files to computer Vista to Windows 8:

  Transfer files and settings from another PC

  http://Windows.Microsoft.com/en-us/Windows-8/transfer-files-settings-another-PC

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• HP DV8t: Problems of migration origin to new SSD HD Win7 OS.

  Hi all!

  I have a laptop HP DV8t. The laptop computer was purchased with Windows 7 64-bit and 2 x 500 GB hard drives. I would like to replace the hard drive with a 80 GB Intel SSD.

  Immediate problem, it's that I can just install Windows 7 on SSD because the recovery disks will not accept a smaller than 500 GB HARD drive.

  What I've done so far:

  Fact reset factory + formatted hard drives.

  Replaced with SSD 80 GB secondary hard drive, then the Acronis Migrate tool used to clone the content of the main drive to SSD.

  Put SSD drive as primary drive, replace (empty) 500 GB secondary drive.

  Problem: when connecting, I get a blue screen that says "this version of windows is not original" and can't do anything.

  I try again. Repeat the process until the SSD as drive, but now as secondary drive, put the drive of 500 GB (with BONES) where I cloned the operating system.

  No blue screen during the connection. Things seem to be ok, I see the windows logo on the SSD drive in my computer so assume that windows runs on the SSD. Problem: Now the windows installer will not work. Most of the programs are not installed, which gives an error to windows installer. I can't update the installer online because it is now suspended indefinitely. Also I can't update things such as .net framework (more error installation). This essentailly means that the laptop does not work because I can't run anything on this subject.

  All the tips are greatly appreciated.

  Thanks in advance

  Saladin

  It works and notice I said 'will' and not 'must '. It should work though, as I've done it before.

  Download the ISO of Windows 7 Home Premium files and create the W7 installation disc (burn) a detail of W7.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Version what ever you use it must match what the computer came with, so your W7 product key will work on the underside of the laptop.

  If you need help with burning ISO files or make the drive, post again _ don't forget to verify the disc after burning or it won't work.

  Follow this tutorial to install W7.

  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  The tutorial has you erase the drive to install W7 on, it is important to remove the entire disk, not just format it. After you remove the drive to let the W7 disk format automatically, don't do it yourself.

  In your case, you have made such a mess trying to install W7, you must use the W7 installation disc to remove all information damaged on the drive. If there are any partitions on the disk, delete those too. You'll end up creating "Unallocated" space on the entire disk, and that's what you want.

  Continue Setup and install it as a trial, when it's done, right click on "Computer" and select "Properties".

  At the bottom of this page to find 'change product key '. A click on it and follow the directions to enter the product key for the laptop.

  The instructions above are very important so follow them exactly or it won't work. It will take about 20 minutes to install W7 and 2 hours to download the ISO from Digital River files.

  First, install your chipset driver.

  Start the automatic driver finder to install the most recent.

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

  He'll also find one for your Intel WiFi card as appropriate.

  Then install your video driver, here a direct from NVIDIA.

  http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-296.10-WHQL-driver.html

  Install the rest of your drivers here.

  http://Forum.NotebookReview.com/HP-drivers-software-Forum/404164-drivers-HP-DV6-2xxx-dv7-3XXX-DV8-HDX16-HDX18-Intel.html

  Also, install technology Intel Rapid Storage Technology driver from the link above.

  Install the drivers in the order that I posted to them. If you need help with the rest of the drivers or get the hot key bezel to work (bass and treble _ volume _ eject) and then validate again.

  Do not use the command utility of tone on your support page, it is corrupted and it will not solve HP.

  In all cases, save the installation on the desktop files and install them from there, not in a temporary folder.

  You don't have secondary hard disk, none of this has nothing to do with it, it is only used as a storage drive. When you follow the tutorial it will show up there (you'll see what I mean, when you get there), just ignore it and only deal with your new SSD.

  I have a dv8 so I know exactly what to do.

  

• Problem to migrate the Dollar Photo Club credits

  Hello!

  When I log in Dollar Store Club, he said:

  "Transfer your 79 unused downloads at Adobe Stock, valid for an additional year! . Receive an incredible discount on your 1 year of monthly Adobe Stock! MIGRATE NOW! »

  «When I click on "Migrate now" I come to this page: https://stock.adobe.com/se/Dpc/Migrate and connect on my CPD account and got a Redemption Code "button".» When I click on this button, I got a text "the good news, you already seem to have a plan" and no credits are migrated...

  Hi Anders

  If you want to take advantage of the promotional action plan, you will need to do during the transfer process.

  The system can recognize that you already had a plan of Stock and you stop to do that.  Will focus on this and let know you when resolved.

  Thank you

  Bev

  https://www.dollarphotoclub.com/info/FAQ

• During a planned migration, which method of database migration is the best?  Data Pump or RMAN?

  I ask this because I recently had to migrate a database to a new feature of ODA and our application developer head was upset because I used pump data to the database to the new platform and it took a few post import scripts to set permissions to what they were before the move.  He suggests to use RMAN, because it will restore the database to exactly how it was previously without having to restore the permissions.  I would like to know what methods are you using and which one is better?

  Thanks in advance ^_^

  He suggests using RMAN

  Yes, absolutely, and not just for the reason you mention: don't have time to stop a problem for you? Re: Tuning RMAN - active database in double with size 1.7 to