problem printer and scanner for photosmart C4680

Similar Questions

• Drivers and software for Photosmart C4680 not compatible

  I have upgraded to Windows Pro 8.1 (32 bit) and I was told that I had to update my drivers and software for my HP Photosmart C4680 printer to work with Pro 8.1. So I uninstalled all the drivers and software and even made a record of cleaning for you ensure that it has been uninstalled. I went to the HP support as suggested Pro 8.1 and proceed to download the software "compatible" and he went out and reached 99%, then disappear. I waited 15 minutes to see if he would have done to install and nothing happened. I did the Compatibility Test for it on 8.1 Pro and he says it's not compatible with 8.1. What gives and how I get this to install and works so I can use my printer?

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Satellite C660-10 d - get my old printer and scanner to work

  I would like to ask advice on how to get my HP 1020 Laserprinter and HP G2710 Scanner to work with my Toshiba Satellite C660 Windows 7 (Home Premium) 64-bit respectively?

  The software of the printer (pilot) is not installed correctly while the Scanner does not charge same atal. I hope that it is ethical to mention other products on the forum of the society. Otherwise, my apologies.

  Hello

  I put t think that the problem is related to Toshiba

  If your printer and scanner are old enough, I could imagine you don t get the drivers for Windows 7. You should check this page: P directly if the Windows 7 drivers are available or not.

  If Yes, download and install it, it s the same as on other laptops and computers. If no driver available devices are not compatible with Windows 7.

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• Can I use the device drivers XP (printer and scanner) with Windows 7 Professional in XP mode?

  I have a Business Inkjet 2800 printer and scanner HP Scanjet 5470c on my XP PCs that HP doesn't provide drivers for Windows 7.

  Can I attach these devices for my new PC running Windows 7 Professional in XP mode?  I have searched for hours on the site of Microsoft and Google, but couldn't find a definitive answer.  Any information would be appreciated. Thank you.  Ed

  You could attach and use both in XP Mode with XP drivers.

  There is a driver Windows 7 for Business Inkjet 2800. Go to control Panel\Hardware and Sound\Devices and printers and select Add a printer. When the list of drivers, update Windows Update and there is under the heading of HP drivers.

• who is the best printer and ink for printing on perforated vinyl

  who is the best printer and ink for printing on perforated vinyl

  Any printer would work with vinyl, but I would prefer a DESKJET with an ADF (ADF).

  Through ADF will send smoothly and does not deform as much. The printer without the charger can bend the vinyl a little and it can create bubbles in the computer. Hope this helps, thanks.

• Impossible to install the driver Windows 7 for my Canon MF4150 USB printer and scanner-worked in XP

  Original title: Windows 7 x 64 Windows printer problems is not able to resolve

  The scanner and my Canon MF4150 USB printer was working fine with my Windows XP computer.

  I got a new computer with Windows 7 x 64 OS and I can't get the printer to work.

  I downloaded the printer driver specified for Windows 7 x 64.

  The installation program is not accepted as I get a message that the resource file are not available.

  I then added the printer manually without success.

  The strange thing is that it shows in devices and printers but nothing prints.

  Initially, it has the usual green check that the default printer then becomes a warning sign yellow when I try to print.

  Right-click on the printer and select "Printer properties" and select "Canon MF4100 series UFRII LT" in the SUP menu if it exists, this name may be different in your machine. After the Properties window shows tab select the 'Port '. change the port to another USB port (the one that the printer is connected to), and then apply the changes. Your problem should be solved.

  I hope this helps

• Problem on Satellite A100-847 - printer and scanner USB do not work

  Hello

  Both of my printer and my scanner genius works fine on my PC but when I the connected to the satellite A100-847, it seems that there is not!

  Even the mistakes no. USB and two of them are on, plug unplug turn change anything.

  Known that I have installed the driver on the CD, but still no printer no scanner?

  Gives me headache is that the USB mouse works fine?

  One last thing after having this problem, I tried to update the BIOS thing but nothing change

  Hello

  Your laptop preinstalled with comes a recovery DVD?

• missing OCR for Photosmart C4680

  Hello-

  Is there an OCR software included with the Photosmart C4680?  I did a full install, but I can't scan to create editable text.  The aid function advises me to select a pdf in text can be added to the output, but this option is not given in the drop-down list.  The data sheet

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/3739148.PDF

  Speed of scanning OCR (letter) is<34 sec. ="" i understood="" this="" to="" mean="" the="" c4680="" i="" was="" buying="" actually="" has="" ocr!="" i="" looked on="" the="" hp="" site="" and="" got="" the "full="" feature="" software"="" download,="" and="" installed="" it,="" but="" this="" didn't="" help. ="" i="" could="" find="" no special download="" for="">

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=SG&lang=en&product=3739150

  Any help would be appreciated.

  Thank you

  -Steve

  It works!

  And you were right, I had to uninstall and reinstall the PhotoSmart software before you install the OCR software.  I had updated to version 13 of PhotoSmart 12 version that was on the CD supplied with the printer.  I got the message "OCR application is not required" when I tried to install on version 13.   Uninstall and revert to the version 12 allowed me to then install the OCR.  I'll go with version 12, it has everything I need.

  I think it is strange that HP it so hard.  After successful installation, I changed from a customer who felt he was ripped off (after being sold nonexistent OCR) to a satisfied customer!  HP should at least have a link of his C4680 software page to the OCR software and indicates the software OCR is working on the C4600 series.

  Anyway, thanks a lot rhanman for your help and for the time and effort in replying to my query.  I greatly appreciate it.

• problems printing and diagnosis

  Photosmart 6520 works and gives the following problem:

  Does not print a document of more than one and a half pages without error message saying that the printer cannot print the job.

  In fact, the error message is displayed even when successfully printed a shortest work!  It seems that when a task is finished the unit does not release the printer for the following work, but retains all the tasks in the queue.  With respect to jobs longer, it could be that the printer prints what it holds in a memory buffer, but then cannot reload the buffer with the next segment to print.  Printer status report and test network running wireless reports revealed no problems.  I have moved away from the printer to the desktop and removed one recently added anti malware app without success.  I uninstalled and reinstalled the printer.

  My House was close enough of a sudden lightning in two weeks she deleted my modem, a card mother very Dell 2400 cable, one on a TV HDMI port, all in the same room.  Other damage occurred in other rooms of the House.  However no damage appeared a new Dell Inspiron that was connected wireless to my system, nor to a decoder box w/supporating big screen in an adjacent room.

  Hello @Palmsdog and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems printing. I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, you are connected via a USB cable or wireless?

  Please let me know what you find.  Thanks for posting on the HP Forums!

• ADOBE CC - Customer Service fail to resolve my problem (curves) and compensate for them.

  Event history:

  23 February:

  I discovered that Adobe Photoshop 2015 CC had a problem with the program

  -J' I import my raw image

  -Apply the curve

  -Curve pen

  -Save as a PSD and JPG

  -Image on the PSD and JPG file appear with no good hard and curve lines.

  I report this problem to the Photoshop customer service, they said, it was a problem to update. I uninstall and reinstall... She still took place. Customer service suggested that I use Photoshop 2014.

  I paid over 100 dollars for old hardware? I didn't think it was just... anyway. I waited.

  March 4:

  I reinstalled 2015 and the black lines were always there.
  -J' have customer service message, they acknowledged the problem (bug) and assured me that the problem could be solved on the next update.
  -The update for adobe Photoshop was in November... (at this point I'm still paying)

  -They recognized this was not my fault and gave me a 30 day extension.

  
  30 days after I requested additional since an extension I was using a lower quality product. They do not allow this. Now, I'm upset.
  Not only am I paying full price, I pay for something less.

  They referred me to a (top team) B.S. that would respond to my inquiries about the problem...
  A came response where I was told that I was unable to get the extension... The end.

  What kind of service is that? Still, I have black lines on my jpg files and cannot produce impressions of Adobe Photoshop 2015! I will not be satisfied with something obsolete! What is the point of subscription if I don't get to use the latest software?

  I have attached a picture for example, nothing special. It's not supposed to be a hard line on my image, but each image that I recorded with changes product LINES TOUGH! * Note This is a PSD file, but jpg files save and print the same!
  

  If you have a solution... I'm all ears, because the Adobe creative team can't do anything for me and will not compensate for me either.
  If you are interested in the transcripts between service customer and I have... I have them.

  Just out of curiosity, you reset the Photoshop preferences? Worth a try.

  Manually; course may be cancelled:

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

  Fast; cannot be undone:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  In addition, as Warunicorn says, check updates of system which may include new graphics drivers.

  If you continue to see the problem, you could post a bug in the feedback.photoshop.com report

• 564XL cartridges Cyan, Magenta and yellow for Photosmart Plus B209

  Before my shift or I turned off and spends a lot of money for the ink cartridges for our Photosmart Plus B209 printer, can anyone tell me for sure ifXL 564 (cyan, yellow and magenta) color cartridges will be really appropriate in this printer?  I looked at the connectors of the cartridge in the printer and they don't look big enough to take something bigger than 564 regular cartridges I have there now.

  I already made the mistake of buying a combo pack of cartridges with 564 yellow cartridges, Cyan, Magenta and black Photo.  I discovered, after the fact, the 564 Photo Black does not fit into the B209.  So, before you make the same mistake with color cartridges, I was hoping that someone could tell me if the 564XLs of Cyan, yellow and Magenta in fact fits.

  I know the black cartridge 564XL will adapt, but it is obvious because of the cartridge housing is greater.

  Anyone can answer this question reliable?  I would really appreciate it.  I need to order a certain number of cartridges and if color XL cartridges will be adapted, I want to get these.

  564xl color cartridges will fit the Photosmart B209a.  Color xl cartridges are the same physical size as the cartridges 'standards', but are filled with ink more.

• 8625 all-in-One: 10 Windows updates for null printer and fax for settles not 8620

  We have four machines Windows 10 using our 8625 all-in-in-one on the network.  Only used the installation CD.  The machine stops of if a 8620 update for printer Null and Null fax microsoft who do not always with 0x802200b and 0 x 80070790 respectively.  Otherwise, everything works normally.  These updates can be removed somehow?

  Welcome to the HP community @rball007,

  I understand a computer running Windows 10, which had the printer installed using a Setup disk, now knows the pop ups. My best advice would be to uninstall the printer completely from a PC, the HP printer install wizard for Windows instead, to ensure that the most current drivers for Windows 10 are installed.

  Good luck

• HP OfficeJet Pro 8500 first print and mirror for treadmill mouse and t shirt

  HP OfficeJet Pro 8500 first concerns.  I tried to figure out where the printer setting is for printing in mirror.  It is usually in the Advanced Settings tab.  I called HP and was told by 2 different tech, then supervisor that HP does not include this option in this printer.  I tried to explain how I felt it was hard to believe and I was told that it is most likely was an option that was no longer necessary.  I have his name and the file number.  I asked this bump up the level immediately above, because I felt strongly HP has not intentionaly left this option.  I digress.

  Can anyone suggest anything.

  Thank you

  Joe

  Thank you all

  Got it to work.

  990 has not worked, 5600 had mirror but does not print correctly.

  I went to the HP site and downloaded different drivers until I could get to work.

  Thanks again

  Joe