Problem running CS5.5 in WIndows 10

Similar Questions

• Problem running Battlestations Pacific with Windows 7 Home Premium

  I just buy Battlestations Pacific and tried to load it on my laptop ASUS G72GX under Windows 7 Home Premium.  The game seems to load correctly, the shortcut will appear in the Games folder; However, when he tries to run the screen goes black, the cursor shows that the program is "pending" then I get spilled on the desk with a message that the program has stopped running and the computer will try now Windows to solve the problem, after a minute or so, I get a message that there is currently no solution and the program is to be arrested.  I uninstalled and reinstalled the program, I tried to use troubleshooting compatibility to run it under Vista and XP (Service Pack 2) mode and it does not work.  I have loaded the game on my sons office that works under XP (Service Pack 2) and it loaded and ran without any problems.

  Hi Hank53,

  Welcome to Microsoft Answers Community Forums.

  Your game software is not listed in the Compatibility Center Windows 7 you can find here. Please see this link here for frequently asked Questions and measures to address if the product you are looking for is not.

  Please check with the software vendor for technical support regarding the program running on Windows 7, here is the link for the help - http://support.eidosinteractive.com/

  Alternatively, you can try to lower the resolution of the game screen to support your monitor display settings and increase hardware acceleration in Windows 7 to check if it solves your problem.

  To increase the acceleration hardware under Windows 7, please see the steps below.

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7. move the hardware acceleration slider to up to the increase of hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Help hope this information.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• I am trying to run Halo 2 on windows 7 n 64-bit OS. MFPlat.dll problems

  I am trying to run Halo 2 on windows 7 n 64-bit OS. The game installs properly and is registered. When I start the game it says the the mf.dll and mfplat.dllfiles are absent. I downloaded both of dll.com and install in my system 32 file and file of halo 2. The message I get now is that "point of entry" is missing from the file mfplat.dll.

  Hi, Landon5050,

  If you get to the missing file mf.dll errors or any other errors with the mf.dll file, we suggest that you re-install the program, uninstall and reinstall a newer version, or check to see if updates are available for the program associated with the file instead of trying to copy a new version of the file on the computer. File errors are often caused by more than just a missing or corrupt file and copy a single file could cause more problems.

  http://www.computerhope.com/cgi-bin/process.pl?p=MF.dll

  These dll files exist in Windows, but there are also in the Halo installation directory. The equipped versions of Halo are older and is not compatible with Win7.

  Rename the files in your directory of Halo or replace them with newer versions of your directory %windir%\sysWOW64 or % windir%\system32.
  http://www.computing.NET/answers/gaming/Halo-2-missing-DLL/11709.html

  For re - save these files follow this step:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.

  2. type regsvr32 mf.dll and then press ENTER.

  3. new type regsvr32 mfplat.dll and then press ENTER.

  There is a patch for this game as well. Have you tried to install the patch and check if it helped.

  Here is a link to download the update for this game.
  http://download.Microsoft.com/download/b/0/e/b0ec1acf-8623-4520-9764-75baaffc0718/Update.exe

  Run this update after the game is installed.   -DivyaR - Support Engineer

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Halo-2-missing-DLL-files/def138fb-7b9a-4AA1-BDD5-a6171534aaaa

• Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Could not update windows 7 Home premium service pack 1 for windows 10.

  I tried windows update. all updates are installed except win 10 update that comes up with unexpected error

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Problem running on Windows 8 downloadingand mobile Blackberry Desktop Software

  I tried to download the Blackberry Desktop Software from blackberry.com, but somewhere through the download process, it says: "Download interrupted" and when I say curriculum vitae, he began a security sweep after what he said:
  "This program is not commonly downloaded and it may harm your computer."
  Then when I click Run, it is said:
  «Windows protected your computer: Windows SmartScreen prevented an unrecognized application start.» Running this application might put your PC in danger. »
  Under "more info":
  "Publisher: Unknown Publisher"
  App: 710_b042_multilanguage.exe'
  Then becomes available to "run anyway. When I choose this, another message appears:
  "" Cannot run this application on your PC: find a version for your PC, check with the software publisher. ' "

  I don't really understand why it does this, as to my knowledge, that the download is not finished, so, how do I run the program before it is downloaded. I'm on a slow connection, so maybe that's a problem? Also, I tried to check the .NET Framework 3.5, but it was on, before I even started downloading (although, not options Windows Communication Foundation). If someone help or advice for me?

  Try disabling the Smart screen temporarily filter:

  How to disable or Deactivate the filter SmartScreen in Windows 8

• Having major problems running newly installed Phtoshop CS5

  Having major problems running newly installed Phtoshop CS5 on a newer, much more powerful computer that will benefit better large files published on CS5. When I try to run it, I get the message "Adobe Application Manager required to start your trial is missing or damaged. Please download a new copy of AAM... "I made this withoiut effect. I uninstalled my purchased version and installed the "download version" of Adobe's Web site. NO luck. I get the same error message. AM I supposed to buy in Adobe CC and chuck my purchased version CS % or is there a work around for this problem?

  Have you tried to download it from:

  Download the CS5 products

  The error message is that this installation is corrupted.

  Concerning

  Stéphane

• CS5.5 and Windows 10

  I would like to ask if CS5.5 programs work without problem on Windows 10?

  Unsupported... can work, don't

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Photoshop CS5 works with Windows 10?

  Hello!

  I currently have Photoshop CS5 installed on my Windows 7 64 bit desktop, and I was planning on upgrading to Windows 10. The only thing that holds back me is that I don't know if Photoshop CS5 will run on Windows 10.

  So my question is... is working Adobe Photoshop CS5 on Windows 10?

  Thank you

  Bill

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• Error install CS5.5 on Windows 10

  The CS5.5 has been installed on Win7, and recently I have upgraded to Windows 10.  I have re-installed the CS5.5 and a list of errors and warnings appear after installation ended. Most of the applications have been installed except the Acrobat Professional.

  I tried to start applications such as Photoshop, Flash Professional, and Adobe Bridge and these could properly start.

  I tried to go through the troubleshooting, but seems no solution to this issue.  Help, please.  Thank you very much.

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• I suddenly have problems with CS5 to export a Mac.app projector.

  Everything I'm doing is changing text on a file I exported as a projector Mac before and worked fine. The application launches another swf with load movie. The newly exported application does not overwrite the previous one - first suspicion that something was wrong. I deleted the old copy, then a new has been exported. However, when I try to run it on the new Mac OSX I get an error due to a damaged file so that the application can not be opened. It opens on an older Mac OSX. Strangely the same app that has been exported about 4 months ago works fine on the new Mac OS, so I just use that for now. I tried to reinstall Flash (I'm working on windows) during the previous installation. This has not fixed it. I also saw a few other concerns of older files are not replaced on the export and a clip that simply would not work correctly when that one bit of the text has been changed in the code. What can I do? Should I delete completely first Flash? I couldn't see a way in window 7 to uninstall Flash CS5. The windows projector works that I exported also works very well.

  Update on that. I found in another thread how to do a clean uninstall. I reinstalled Flash this time it wasn't a list of errors as when I installed on top of the existing program. But the problem is still there. I did a small test file in case the original file has been damaged. If I export the mac app I that the file was damaged only on the latest OS. This occurs when the file is unpacked on a Mac. I need to be able to export Mac projectors. Why it doesn't work anymore? Previous Projectors that I exported work on the newer operating system.

• I have a problem. dose of Instant Messaging window Yahoo doesn't seem to me in yahoomail? I have Firefox version 9.0.1

  I have a problem. dose of Instant Messaging window Yahoo doesn't seem to me in yahoomail? I have Firefox version 9.0.1
  IE display this window for me
  I have the latest version of flash player
  I hope you can help me.

  Another question. Dose has a 64-bit version firefox?

  Alireza salvation,

  It looks like a known issue reported here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=713014

  There was a workaround solution posted, but I have not tested it myself. Here are the steps.

  1. Go to the Yahoo Messenger Options - change the window in the tab menu and press OK.
  2. Then go back and switch to the small window and press OK.

  Once the bug is resolved formally, you could try to run every night or Aurora build to use the hotfix at the beginning.

  Hope this helps!

• I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black

  I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.

  lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.

  I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.

  So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.

• Doom 3, C & C Generals and C & C Tiberian Sun do not run or play in Windows 7 64 bit

  Three of my favorite games, C & C Generals, C & C Tiberian Sun and Doom 3 will not run or play in Windows 7 64 bit.  Last week, I built a new computer with Intel i7 860, GA P55A UDP4 Mobo, Gigabyte ATI Radeon HD5770, 4 GB ram, LCD Samsung B2350 with Direct X 11 and Windows 7 64-bit.

  Installed the 3 games. C & C Generals does not work, a little box came on the bar saying 'a serious error has occurred' tasks.  I've uninstalled it. Then installed C & C Tib Sun, the error code says "live X-please ensure you have direct X 9 or a later version, also make sure that your video card meets the req min etc.  I have the last card ATI graphics and direct X 11, then why the direct X error message?  Tried Compatibility Mode set reading under Win XP sp2, the game still will not play, and even direct X error message came.

  Installed in Doom 3. When I tried to play it, it goes in the first screen of doom, but with the main playing surface in the lower right corner makes it unplayable because you can't see the OK or Cancel buttons.  A run yet compatibility mode and still the same problem.

  Why is Windows 7 64 bit as a big missed with old games?  Please help, how can I get these 3 games to play on my win7 64 bit computer?

  Peter K

  Thanks for your advice.

  I should have done a little more research before asking my question, my apologies for wasting time anyones.  The C & C Tiberium Wars game works now on my Win7 64 bit computer but only after I downloaded the 263 MB C & C3 update patch.  Also, after you perform the procedure in compatibility mode, the game runs and plays OK.  With Doom3, all I had to do was check the compatibility re fonts to display box, because I was running Win7 in large fonts/icons.  Doom3 now works OK.  As I uninstalled it C & C Generals, I have not bothered with it. I guess in some cases of incompatibility, the answer is to install the latest update for the game /patch, and then run the compatibility mode.

  Peter K

• installation problem of alpha Centauri on windows vista

  I'm unable to install alpha Centauri on vista

  I run the installer, but nothing happens

  Hello
  Do you have an error message when you try to install?
   
  There is currently no information about compatibility with Windows Vista to alpha centauri. It may or may not be compatible with Windows Vista. Clickhere to check.
  However, you can follow the steps and check:
  Step 1:
  You can try to right click on the file setup.exe and "run as Administrator".
  
  
  Step 2:
  If worked well in Windows XP, I suggest that you run alpha centauri in Windows compatibility mode .
   
  If it still does not work, I would say that you contact the manufacturer of the game for a better support.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]