Problem running oblivion on widows vista 32 bit

I have the wrong video card to run my game oblivion. is there something I can do?

Hello
 
It would be preferable to the following questions so that we can better help you.
1A this game already worked on your computer?
2 - is your computer meets the game requirements.
You can try to uninstall and reinstall the display driver and check if the operation of the game, consult the computer manufacturer or the manufacturer of card display last updated driver

You can also check the following link and make sure the game is compatible with Vista: http://www.microsoft.com/windows/compatibility/

Also, it would be better if you contact the manufacturer of the game for further assistance.
 
Kind regards

Niranjan
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • 8024A 000 error code when you try to run Windows Update on Vista 32-bit

    I get the above error when you try to run Windows Update on Vista 32 bit.

    I use an Asus laptop and have used the Asus recovery cd.
    I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
    I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
    Any help would be greatly appreciated.
    Thank you
    Sam

    Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

    See you soon
    Sam
  • Problems starting Windows Firewall in Vista 64-bit

    I have a laptop HP with Windows Vista 64-bit installed. A few weeks ago, I started getting a message that the Windows Firewall did not work. I tried to restart it via the Control Panel, but it won't allow me. I tried to run tools of analysis for possible corrupt files, disabled through the System Configuration utility in the control panel services and rebooted, etc.. When the system boots, the message "problem reports and solutions has stopped working" is displayed, followed by other messages and ends with a message that the firewall does not work. I think that all messages are attached together as a resuly of the firewall issue.

    In addition, I installed Microsoft Security Essentials, which need to make updates. Whenever he tries to do, it cannot and still once, probably because the firewall does not work. He continues to make an attempt to update and will not stop doing so, even after clicking on "Cancel Update" when its window is opened.

    I brought no changes to software that would have caused the firewall to stop working and can only assume that the question was created by one or more software updates automatic in the past two weeks, either from Microsoft or from HP.

    All attempts to resolve the issue have failed, and I hope someone can help me without providing links to register software or driver that force me to buy them or not and can never help to solve the problem.

    Any help would be greatly appreciated: it has become quite frustrating.

    Hello

    Disabling Services is not a good idea.

    First, analyze your computer of viruses and malware.

    If it's clean, or you found a few "junk" and it does not work after cleaning...

    Open a command prompt, type sfc/scannow and press ENTER.

    It must analyse the system files and replaces incorrect versions with appropriate Microsoft versions.
     
    This document contains more information on SFC scan: http://support.microsoft.com/kb/929833

    If this process cannot run or get caught in the middle or also shows a lot of errors and cannot fix. I'm afraid you're better to make the backup of your data and reinstall the operating system.

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • Problem with Satellite A300 and Vista 64 bit

    I just bought a Toshiba Satellite A300-1CO model: PSAJ4E-03R015PT, which came with an impressive 4 GB of ram device.
    I knew with Vista 32-bit, only 3 GB would be available, but since I got a license of Vista 64 bit I care, came home and installed it.
    When I looked up the drivers on the toshiba site, no drivers for Vista 64 bit drivers were available!
    I have now 4 GB or RAM available and I also have problems with face recognition software, microfone, sound card, card reader and a few other things.

    I searched the websites manufactors drivers and I managed to get some of these things barely usable, I don't think that it is a SD solution.
    Other laptop brands are made available long drivers for vista 64 bit some of them even for XP 64 bit!

    I would like to know how long take to Toshiba do official drivers available for vista 64 bit on their Web site.

    Best regards, Pedro P.

    I was looking for 64-bit drivers for my laptop, but since this is a new model, the drivers were not yet available. I checked a few weeks later and they were no longer available.

    Just wait awhile, they should be available soon.

  • Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

    Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

    Hello

    Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

    Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

    Method 3 :

    Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • Error code 0 x 80248014 when you try to run MSE Update on Vista 64 bit OS

    Tomb guard Windows Update crashes when you try to run the Service Pack 1 for Vista 64 even if it seems to have installed service pack when I view installed updates.  Update the window continues to show the service pack update according to availability.  So far, I ran it three times and he shows as installed three days in a row, but he does not appear in the properties view and continues to show an available update when I check for updates.

    It's a little confusing because the error code 0 x 80248014 appears when you try to update to MSE, so there seems to be two issues.  The MSE error one and two, the apparent success of the installation of the Service pack 1 for 64 bit Vista Home Premium but not appear in the properties view and always appear when checking for updates, even if each attempt to install appears to be successful.

    Hello

    Run the system update tool

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

    Retry the update

    Reset the Windows Update components

    http://support.Microsoft.com/kb/971058/en-us

    Error MSE - which describes the boots s. is what will do the above tools.

    http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/error-code-0x80248014/3c3f7fca-F9E0-4D50-afa2-63acab6fb163

  • A 64-bit microsoft Office 2010 will run on an os Vista 32 bit?

    I bought office 2010 to run on my computer laptop windows 7 and I would add to my Vista PC operating system, but it gives the error cannot run on a 32 bit OS.

    You want to know if this program is compatible to run on the Vista operating system.

    It will not work on 32-bit. You need 64-bit windows.

  • My OS gives problem that it is widows vista Home premium service pack 2

    my windows vista family premium appeared the problem and my drive is destroyed... How can I reload my operating system because it is defective and give a lot of problem can I get a version downloaded from Microsoft and recharge it. How can I do for this.

    Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.

    If this is not available, contact the manufacturer of your computer and request a replacement installation disc.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Why can't run software zire31 on vista 32-bit home

    palmOne software installation CD works on the previous system, but not on vista

    See if any of these help.

    Zire 31 + vista
    http://www.Google.com/search?q=zire31%2Bvista&RLS=com.Microsoft:-AU & ie = UTF-8 & oe = UTF-8 & startIndex = & startPage = 1

    How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
    http://support.Microsoft.com/kb/931362/en-us

    Make older programs in this version of Windows
    http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

    Windows Vista Compatibility Center
    http://www.Microsoft.com/Windows/compatibility/details.aspx

    You can use a virtual machine?

    Virtual PC 2007
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en&TM

  • Update for Windows vista 64-bit service is not running. I tried to restart. How to start or load update service? I explorer 8.

    Explorer 8

    I have Nortorn 360 installed and running.

    Windows Vista 64-bit

    So far the service is not running. I tried to restart, Fix.

    I deleted the update log I saw another thread, the fix o.

    Hello

    1 did you changes to the computer prior to this problem?
    2. you receive an error message?
    3. what solution did you try?
    4. What are the troubleshooting steps you have tried?
     
    Method 1:
    You can try to start the fix - it and check. Check out the following link.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/
    Method 2:
    You can try to temporarily disable anti-virus installed on your computer and check.
    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    Method 3:
    You can see the following link.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
    For more information about how to back up and restore the registry, follow the steps from the following link:
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
    It will be useful.
  • Vista 64-bit - animation/graphics all run too fast

    I just did a clean install of Vista 64-bit. I've updated Windows and all my drivers, but I have a weird question graphic: anything that moves moves to double speed - and I mean EVERYTHING. The load when windows is start-up animation of 'work' of the cursor, the cursor flashing to this chat window, file copy progress animaiton, pop up adds on websites, movies, graphics of the game... etc.  Everything looks like a film running on fast-forward.

    Please help - I can't find anything similar on the research.

    My system is:
    ASUS - M3a78-cm
    AMD Phenom 9600 quad-core 2.3 Ghz
    4 GB of Ram
    Radeon HD 4670

    My copy of Vista was purchased separately and detail - I ordered the 64-bit through Microsoft disc and just got this Friday or Saturday. This material was in courses run 32-bit Vista until the disc came - but only for a week or two and I never had the game I bought it to load completely (World of Warcraft - add ons were not working)

    The problem started as soon as vista 64 bit responsible, until the video card is on the rise and running. Get the video card to work had no effect on this problem anyway - although he had to work with World of Warcraft Add ons - it's just REALLY fast runnning.

    Thanks in advance

    Hello

    In the face of this problem when you play games?

    You can update your graphics from the link below driver.
      http://www.diamondmm.com/4670PE31GHP.php

    Reduce the hardware acceleration on your computer and check if it works.

    1 minimize all open windows, to make a right click on the desktop, and then click Customize and select display settings.

    2. in the display settings dialog box, click Advanced settings click the Troubleshooting tab, and then select change settings.

    3. now click on continue if you are prompted with a message box user account control.

    4. on the display adapter troubleshooting dialog box, move the mouse to the next level the slider to the left, and click OK.

    5. click OK as many times as necessary and close all the windows along the way.

    You can try to disable the vertical sync (VSYNC) in the settings of the game.

    Kind regards
    Marnie.

  • Vista 64 bit need drivers for Tecra A8

    Mine is a Tecra A8 [PTA83E] and I was looking for 64 bit Vista drivers, but I couldn't find anything that made me wonder dose my Tecra supports a 64-bit operating system and if so where can I find the drivers I need?

    Hello

    I agree with the user above the Tecra A8 Vista 64-bit drivers are not available at this time on the page of the driver and it s not know for me if the drivers will be released in the future.

    However, I noticed that Toshiba has released drivers Vista 64 bit for another series of portable so maybe you shouldn't t give up. ;)

    But I would also not recommend install the 64-bit version of Vista... the fact is that the 32-bit version is more rolling and not all 3rd party applications run and support the Vista 64-bit.

    See you soon

  • Satellite P100-324: need drivers VISTA 64-bit

    Hello. I have problem with finding drivers for VISTA 64 bit for my knees (P100-324). On the page of Toshiba drivers, there are especially the Vista 32 bit but not 64-bit drivers...
    What drivers I got the job:

    Chipset - page intel
    showing - of laptop2go.com

    Specifically, I have problems with the audio player driver and card Connexant.
    Maybe you know what EXACTLY is inside this tower?

    Best regards
    Jarek

    Hello

    If you check your previous assignment under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19246 you will find information given by Mike. Have you tried to search for the drivers on the net?

  • Windows Mail on Vista 64-bit.

    Hello

    I'm having a problem with Windows Mail in Vista 64-bit.

    I can read mail without any problems, but when I try to create an e-mail of the area where you type your message is transparent.

    Everything that was on the screen before opening the dialog box "Create mail" shows through the message box and when you try to type anything in there, nothing happens, for example, you don't see any text?

    I looked in the drop down menus to see if there is an option to change this, but I can't find one.

    Please, can anyone help?

    Thanks in advance.

    John.

    Try to compact and repair the database.
     
     
     
  • Web coding on Vista 64-bit-specific: to print, you must select a printer

    When I print from ASP.NET or Silverlight 4 code, I get the error dialog box that starts "before printing, you can select a printer.  Everything in the print dialog box is disabled, except for the Cancel button.  This problem will not occur when you print from Microsoft Office applications or Internet Explorer.

    According to several Internet stations, the problem is specific to Windows Vista 64-bit.  However, I have not seen a solution.  Is this one?

    This problem has been resolved by installing Windows Vista Service Pack 2.

Maybe you are looking for