Vista 64-bit - animation/graphics all run too fast

Similar Questions

• Why my video clips will run too fast when played on the monitor Panel?

  I posted my problem earlier today, but in re-reading it maybe I didn't explain well enough.

  My main question is: "why my video clips will run too fast when played on the monitor Panel.  It comes from occurring after I selected my media in the Panel tasks and placed in the correct order in the Timeline/timeline.  I knew something was wrong when I saw that the clips did not indicate their right length when it is displayed in the timeline (scope).  They have been compressed in only a few seconds, then the clips should have at least 5 minutes.  I ran the clips in the monitor and of course they ran too fast, with a lot of jerking movements.

  3 video clips, I'm doing a PAL HD video taken with my Nokia N8 mobile video camera. Here in mp4 format. This may be a problem?  Note that when I play these individual HD clips on my computer (Windows Media Player) they work perfectly.

  After that I put the clips in my project Panel (or before in the work space organize), I have perforned no modification or manipulation of clips.  They are in their original state.

  Simply too check that the clips do not appear to be compressed, I burned a DVD, the resulting video ran in a few seconds.

  Help would be greatly appreciated.

  What is your project Preset?

  If you right click on the items in the project Panel, then choose Properties, which is displayed for the FPS?

  It could be that the FPS flag is not picked up by the GER, and if this is the case, you should be able to fix this by choosing to interpret the film and by changing the FPS to 25.

  Hope that helps and good luck,

  Hunt

• Update for Windows vista 64-bit service is not running. I tried to restart. How to start or load update service? I explorer 8.

  Explorer 8

  I have Nortorn 360 installed and running.

  Windows Vista 64-bit

  So far the service is not running. I tried to restart, Fix.

  I deleted the update log I saw another thread, the fix o.

  Hello

  1 did you changes to the computer prior to this problem?
  2. you receive an error message?
  3. what solution did you try?
  4. What are the troubleshooting steps you have tried?
   
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can try to temporarily disable anti-virus installed on your computer and check.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 3:
  You can see the following link.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  It will be useful.

• After the upgrade to Workstation 7.1 Ubuntu comments run too fast

  Hello

  After the upgrade of VMware Workstation 7.1 my VM is practically unusable: the entire GUI of the host thus runs much too fast.

  This happened only after the upgrade of WMware 7.0 to 7.1, I changed absolutely nothing in the virtual machine. Before this upgrade, I've been running Workstation 7.0 organizes a Ubuntu VM since January

  without a hitch.

  I wonder if other users know this. Would appreciate any help, as is this virtual machine have been I do all my development work for my work.

  Kind regards

  Giannis

  If you say that you have changed nothing you don't update the VMWare Tools, have you?

• I have vista 64-bit and redo all the programs, hoever my don caps lock or "(big letter) work do not show when ison or off"

  How to make "caps lock to work.

  1. go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  2. try a different keyboard.

  3. it is install Vista, upgrade, and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Games run too fast! (Faster than normal around 1.5 x)

  Hey I have problems playing games since the installation of W7.

  I tried only two games, which is Half Life: counter-strike 1.6 through Steam and Batman Arkham Asylum.
  From what I see, I shoot and walk faster in CS 1.6, when I play on my own. But when I join a server on Steam, I go fast, Yes, and then I will be stuck (I guess because the server will try to match my speed with others)
  In Batman: AA, I was comparing Youtube videos with my game and found that my Batman works faster than in the videos.
  Here's my DX System Info:
  ------------------

  Information System

  ------------------

  Time of this report: 11/16/2009, 22:21:27

  Name of the computer: PC

  Operating system: Windows 7 Professional 32 - bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)

  Language: English (regional setting: English)

  System manufacturer: GBT___

  System model: AWRDACPI

  BIOS: Award BIOS v6.00PG Modular

  Processor: Intel (r) Core (TM) 2 CPU 6400 @ 2.13 GHz (2 CPUs), ~2.1GHz

  Memory: 3072 MB RAM

  Available OS memory: 3072 MB RAM

  Page file: 1613MB used, 4527 MB of available space

  Windows Dir: E:\Windows

  DirectX version: DirectX 11

  DX setup parameters: not found

  DPI setting: Using System DPI

  System DPI setting: 96 DPI (100%)

  DWM DPI Scaling: disabled

  DxDiag Version: 6.01.7600.16385 32 bit Unicode

  I'm also running on a map of XFX9600GTXXX, with 8 x AA and AF, with Vsync off (must be turned off to reach 100 fps in CS, which I play competition)

  Tried solutions:

  I've been Googling for answers for almost 3 days without getting anything. I tried Winthrottle to slow down my CPU, defining my affinity proc at the base, and it does not work.

  (Although the speed improved to Batman, but running it on a carrot is terrible - did not work for CS)

  Turning on vsync seems to make it acceptable, but I'll be capped at 75 FPS.

  I need 100 fps on CS, because the response of the mouse is better.

  I was restoring my nvidia, same drivers try the new Forceware, nothing helps.

  I can't reformat my HD, but only not to do so due to college.

  These Core Dual optimizers, that I read are only for the amendments, I guess, so I can't do anything to this topic and it seems to be no fix.

  If anyone knows, I would like to know what is causing this = /

  It could well be your network drivers.  Even if you later, sometimes people writing the drivers need to improve for questions like yours that described and so you should keep a watch last updated driver.  On my laptop, for example, constantly Dell publishes new drivers for it that problems are discovered and updated correctly to handle Windows 7.  While it works great, they discover problems that may affect performance.

  Have you read anything in the counter-strike forums about anyone else having a similar problem?

• WD passport external drive breaks down computer hp amd athlon, vista 32. Get the computer running again after that 3 full restores.

  Have wd passport, it blocks the computer, (blue, white, green screen screen), the problem started when I tried to update the wd software from windows update, partially backed up files? Afraid to fix the unit on my computer I had to do 3 times system restore to return the computer to life a little somehow... but don't trust him more. A defender analyses and analyses of Kaspersky on wd drive and software, computer, crashed... again... and again. He is back on? So do shred computer and buy a new one? This is similar to what killed my Dell a few years ago... only without connection... computer external hard drive is HP (compaq cq60) AMD athlon x 2 64 vista 32 bit nvidia graphics (paralyzed, unable to start the control screen). No disk Windows vista. I think I have backup and restore disks but not enough savvy to use computer. Checked with computer shops, the Bill to fix is more than some new computers... 3-400 dollars.  At end of rope here, want to throw all this stuff of high technology on the window (pun!) and get back to newspapers and mail.

  Hello

  I suggest you run the fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Also check the external hard drive for bad sectors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  It will be useful.

• HDX18-1020US Blu - Ray on Vista 32-bit

  I have a new HDX18-1020US that came with Vista 64 - Bit and Blu - Ray.  I decided to convert 32-bit Vista (some software I need does not work on 64-bit) and have completed the conversion (enough patches and downloads from pilot to choke a horse).  What does not work is the Blu - Ray player and it will not play any DVD movies.  I send a query to HP and they said they will not support it in this way, even if they have drivers for Vista 32-bit, XP and Windows 2000.

  Also, they do not have the software for Vista 64-bit.

  All the ideas and where to get the software?

  I solved my problem.

  I also have a Pavilion dv9750us, another laptop Blu - Ray and running Vista 32 bit.  I took a download of HP QuickPlay and installed on the other computer.

  BTW-update for HP QuickPlay and the worst I've ever seen. He keeps the opn say you there's a newer version, you forcing to download another 150 MB file, uninstall the previous version and installing the new version.  I went through this 4 times!

• Question about upgrading to Vista 64 - bit - Satellite A300-1EG

  Hello

  I wanted to ask you, how can I run Vista 64-bit without losing all the software that I got carried away with my laptop Toshiba Satellite A300-1EG?
  I would be remiss and so on the Toshiba disk creator?
  Is there a way to extract somehow the recovery DVD?

  Thank you

  Please do not mix two different things. 64-bit and 32-bit versions are not the same and if your mobile phone is supported for the version of Vista 64-bit, you can find all the drivers, tools and utilities on Toshiba download page under http://eu.computers.toshiba-europe.com

  Have you already checked this?

  BTW: recovery image cannot be used for spare parts. It can only be used in the package.

• Change in Vista 64 bit for Vista or Windows 7 32 bit to resolve incompatibilities

  I read everything here and don't think I see my question.  My laptop HP dv6-1030US supplied with Windows Vista 64-bit installed.  A lot of my programs (especially older and even including Microsoft Flight X Games) used to install on a 64-bit operating system.  I must completelyy reinstall Windows Vista 32-bit, then reinstall ALL my programs from scratch or y at - it a simpler way to get for Vista 32 bit?  If I can't do it simply, what buy Windows 7 and install it as a 32 bit on this Vista 64-bit OS?

  64-bit to 32-bit must be done with a clean installation using a full 32-bit Vista or Windows 7 operating system license.

  You need to reinstall everything.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  See you soon. Mick Murphy - Microsoft partner

• I have a Sony Vaio VPCEB36GM. but its on windows vista 32 bit. How can I get the drivers wireless?

  My laptop is Windows Vista 32-bit. And all the drivers on this website are for windows 7 64 bit. Can somoene give me a link for my drivers please. Wired or wireless. Thank you and have a nice day

  The driver and software of your computer can be downloaded from the link below.

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=VPCEB36GM&template_id=1&Region_ID=1&tab=download#/do...

  Unfortunately Sony esupport lists all the Vista drivers so it is not supported. I'm sorry for the inconvenience.

  If my post answered your question, please mark it as "accept as a Solution.

• Can set an alert on my iwatch if I run too slowly?

  Can I set an alert on my Iwatch to tell me I'm too slow?

  I am wanting to run a 10K in a moment and I need my watch to alert me if I'm running too fast or too slow? that is on average min 7,48 miles more than 10 k distance?

  Thank you

  You may be able to find a running application to do.

• My coming sound sounds as it rotates too fast, also I continue to receive windows popup about speech recognition, what does this mean and can I fix it.

  My sound is distorted when coming, such as Skype, its OK at the other end.  It looks like not running too fast (a bit like the chipmonks.  Also, I don't hear anything when I try to play a CD sample in the music file that came with the computer.  Help

  Hi carolejenkins,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to read examples of music files on the computer?

  4. are you able to play the other music files on the computer?

  5. what player you use to play music files?

  6. What is the finished message, you receive the recognition of the word on the computer?

  7. do the sound distort occur only with the Skype program?

  Method 1

  If it helps, try the step below and check out them.

  (a) open Sound by clicking on the Start button and then clicking on Control Panel, click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  Method 2

  If the previous step fails, then I suggest that you manually download and install the drivers for card its updated on the computer by visiting the manufacturer of the computer or sound card manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• All-in-one OfficeJet Pro 6978: OfficeJet Pro 6978 creation for Vista 64-bit Home - where are the pilots?

  Hi - Install CD says operating system not supported. Cannot find drivers - that the reference to "Readiris Pro for HP 14". Support video says to look for hppiw.exe which I can't find on a HP site.

  Is the problem that the 6978 OfficeJet Pro cannot run with my operating system Vista Home 64-bit? I bought yesterday, so I can return it.

  This should be simpler, so THANK YOU for the help and advice.

  Hello

  The printer is incomaptible with Vista 64-bit.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  Kind regards

  Shlomi