Problem S7520N and driver hl-dt-st dvdrrw gsa-h21l

Similar Questions

• HP ENVY DV7-7203SA: problem starting and drive hard smart error

  Hi Ive had problems to start my computer laptop dv7 envy.

  When I run the diagnostic test on the hard drive get a smart error RU5WJO-6K27T-QFPK1F-60AD03 id C1w33EA #ABU

  Finally I have to start, but a few times I had a no device found startup, but only once did I need to reinstall windows 10

  can any body advise on what means this error code and should I look for to replace the hard drive

  concerning

  er65

  HERE IS THE MANUAL for this PC.  Replace hard drive starts on page 48, but indicated that 56 in the area of the manual drive.

  In this same page 100 reported in the box as 108 States "light up the computer or restart the computer, quickly press ESC, then press F10.  This is part of the BIOS information.

  The set of recovery disks will be back as 'new plant' just as it came when new.  No other software is required.  If M$ Office has been installed, maybe check if the disk key and products are always available.

  To the extent where the SSD, do not have the recovery disk set up to automatically accept that in the PC when you run the recovery disk set.  You can try, but I expect to say that the computer has changed and he does not meet the conditions to use the set of recovery disks.

• Photosmart C309a problem software and driver for Windows 7 64-bit w/IE8 browser.

  When I down load and install this software, the HP Solution Center is not install or download completely.  When I open the HP Solution Center, everything I see is logos and touch the bars, there is no wording or lettering anywhere in the window.  I downloaded with Antivirus off and on.  I am running Microsoft Security Essentials Antivirus.

  You have installed Adobe Flash Player on your PC?

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Windows 8 pro with media center - Nvidia Geforce 8400 M G card and driver video problem or something else?

  Hi I have a problem with my Windows 8 pro with media center, my laptop has a Nvidia Geforce 8400 M G graphics card and driver crashes all the time also popups and windows menu has a black background, the only solution is a reboot, can you tell me what is a problem? Thank you

  Hi MAXUSVAN DERT.

  Glad to know that you have posted on the community of Windows 8.

  From your description, I can understand that you are unable to connect to Windows 8 pro with media center and you have a problem with installing the drivers.

  To install the drivers for Nvidia Geforce 8400 M G please follow the link below and check if the problem is resolved.
  http://www.nvidia.com/Download/index.aspx?lang=en-us.

  If the problem is not resolved, then try to install the drivers in compatibility mode.

  Follow the steps to install in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check the run this program in compatibility mode for: box.
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  See also this link for compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Also try Nvidia Support - check with the support that she might be a known issue.

  http://www.nvidia.com/page/support.html.

  Hope the above information helps. If the problem is not resolved, please get back to us and we will be happy to help you.

• Hello. I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove my hard drive and reload the operating

  Hello.

  I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove from my hard drive and reload the operating system with all the updates and load to the top of my existing software. All my software works except my Photoshop CS3, which I use most. I loaded the software disc and download online. The system of charge very well and activation is complete.  Here are the main things that don't work properly, I have noticed so far. First of all, I can't open my camera RAW (I can with my Lightroom software, but not with my Photoshop software?). So I can't open any of my files of digital camera? Second, I can open a .jpeg file and use the Photoshop software and I can save the changes, but when I turn off my calculated the software doesn't seem to be on my computer. When I go to Windows ' search program and files "software is not located here. When I go to "Uninstall" the software of the foldername is there it is. "Photoshop CS3" but there isn't any size file to it IE 400 MB, while my software "Lightroom" on the 'uninstall' section will have a file for example size 400 MB tied to it. Thirdly, I also have a photosoftware of B + W, which operated in Photoshop; It's "NIK software - Silver Efex Pro" and it is located in the subtitle of 'filter' of Photoshop CS3. I use Silver Efex and all functions are working properly, but I can't save the file, it does not save the changes to save.

  Please can you help me.

  Thank you.

  KEith

  Try the forum for Photoshop.

• Printing banners and driver problems

  I have recently updated the genealogy stuff and wanted to print it on a multi page banner.  I have 2 HP printers Photosmart 5520 and P1102W laser printer and neither seem to give the possibility to print a multipage banner.

  After a search, it was suggested by someone that the driver for the Deskjet 6980 would work on the 5520 however I can't find to downoad anywhere.

  I have a macbook OS x 10.8 running and everything say, the option to upgrade drivers via the software update feature, but saw that I do not currently have a deskjet 6980 so I can't get the upgrade (even the HP site for the driver does not seem to have a driver to download)

  Is there a way to get a updated software for all printers that I have who would let me print a banner or get a compatible driver that will be?

  Seems a bit odd that the printer I've had 15 years ago I would like to print banners, but these new ones don't

  In any case, I hope that someone can help you

  Best regards

  Scott

  Hello scm256. I understand that you meet, banner printing and driver upgrade issues.

  In regards to printing banners, only our printers high-end are almost guaranteed to possess this ability. I'll post the specs of the two printers, so you can review the types and sizes of paper supported:

  Photosmart 5520: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157533&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03241207-10%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  LaserJet P1102W: http://support.hp.com/us-en/document/c01999607

  With regard to updating drivers, you probably experience that printers you have lack of updates of the pilot at this time, especially an older printer as the Deskjet 6980. In addition, it will probably be an update of the banners for all printers print driver that does not initially support.

  Please let me know if you have any questions or concerns. I'm only here to help!

  Mario

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• Pavilion g6-1108er: software and driver results for: HP Pavilion g6-1108er Notebook PC

  Software and driver results for: HP Pavilion g6-1108er Notebook PC http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-1100-Notebook-PC-series/5082224/model...

  not download the driver on my laptop.

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. (c)

  Where can I get the drivers?

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• Satellite L300D-11 a - reader problem DVD and blue screen

  Hello

  I'm going out of my mind: o.

  My Satellite L300D-11 has been delivered with a Windows Vista Home Premium, but I recently did a clean installation of Windows 7 Home Premium 64-bit.

  Since then, I have had problems with 'Blue error screen' come randomly. Bought and installed a registry clean program, but that did not fix the problem. Anyone else with this problem - and a possible solution.

  And now, my big problem. My CD and DVD drive crazy me; (o) it's a rug * a DVD-RAM UJ-850 s ATA and my internet research I found that many carpet * an owners have had the same or similar problems. My drive won't regonize or CD play/play. DVD with videos or programs, I can play. CD burning is not possible and DVD burning is sometimes work and other times not.

  I have read on different patches is displayed - also here on the Toshiba - not of the suggested solutions forum works for me - the new solutions I could try.

  Seriously think about buying a USB external DVD drive - but can be it someone please tell me why Toshiba does not get their B fingers * and find a solution as it sews Sony did it.

  I look forward to any reply; (o))

  Someone told me about this quote - "does not it was easier - works on getting smart! I need your help to get smart; (o))

  Hello

  I understand that it was ok with your laptop before installing Windows 7. It is so related to hardware problem software. Can you tell if it was original iso of windows 7 or the Assembly. Have you installed all the drivers for the Toshiba driver page and the maintenance of the right installation order? What burning software do use?

  Have you done this procedure mentioned in this forum:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  Answering these questions may help to understand your question.

• Since the Safari update to the most recent, problems with Google Drive

  Since the update of Safari to latest, problems with Google Drive

  There are serious issues with Google Reader itself at the present time.

  Google is working on it.

  I suggest stop smoking GoogleDrive and remove (with the minus sign) of the SystemPreferences-> users & groups-> LoginItems.

  Until further notice. Take no risk.

• Pavilion 14-v202tx: problem with the driver

  Hello

  I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

  My laptop HP Pavilion 14-v202tx

  Please help me

  Hello

  Broadcom Wifi

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66445.exe

  Broadcom Bluetooth software

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66402.exe

  PCI device

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Kind regards.

• JP Pavilion envy 17 n008nl: problem with a driver

  Hello

  I can't solve a problem with a driver.

  Here is the description:

  \VEN_8086&DEV_095A&SUBSYS_50108086&REV_61\4&3ac2d821&0&00E3

  Should which driver I install?

  Thanks in advance

  Here are the network drivers. Please install the network drivers:

  http://support.HP.com/us-en/document/bph07165

  ALSO

  Try to install HP Support Assistant that will automatically download and install updates/drivers:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

• Age of Empires II - "can't initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  Hello

  I have a problem of Age of Empires 2 running on my new computer. Keeps displaying the following error message: "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. "Someone at - it solutions to this? I have already visited many forums and trying different solutions; None of them helped.

  Tried solutions: change the compatibility and as an administrator, switching to 16-bit color, turn off my graphics card, execution of the extension "nostartup" of the game, looking for old patches from Microsoft (which most are now unavailable due to the game being so old). I KNOW that others have been able to get this game to work on the Windows 7 operating system, but with a few other quirks and I KNOW my video card and driver are more than capable of handling this game. Any suggestions?

  System Specs:

  System manufacturer/model number Dell/Studio 540
  Operating system windows 7 home premium 32 bit
  6 GB of memory
  Graphics card ATI Radeon HD 4350
  Monitor (s) displays Reference Dell ST2410

  Thanks in advance,

  EP

  I had the above problem with AOEII:Age of the Kings. My brief spec is Windows 7 Ultimate edition (SP1) and a card nVidia 8600 GT. I did the following (make sure you reboot after each installation):

  Make sure that you are running the latest patch of AOEII:AOK (2. 0 a):

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  Download and install the latest version of DirectX:

  http://www.Microsoft.com/download/en/details.aspx?ID=5264

  Download and install the latest nVidia Driver suite. I left the autodetect my card software and reset all my default settings. I also installed the full software suite:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Finally, right click on the shortcut of AOE and click Properties. Click on the Compatibility tab and select the following:

  -Run this program in compatibility mode - choose Windows XP Service Pack 2 (!) NOT 3!)
  -Disable visual themes
  -Disable the Composition of the Bureau
  -Run this program as an administrator

  One of the above options maybe work on its own, but that's what I had to do to make it work and I tested it after each step.

  Good luck!

• at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  Hi waynehile,

  1. are you able to boot into Windows after the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  For more information about the correct settings in the BIOS of your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.