Problem Scrollpad and keyboard for T61

Similar Questions

• BlackBerry 8310 Blackberry Smartphones, problem of backlight keyboard for 4.5 upgrade

  I installed the between 4.5, things are working fine so far, except the keyboard backlight, it lights up in time, but most of the time it stays off in the night, she's a bitch! All settings have been verified and the phone was traded again by ATT, but the new phone they gave me the dose exactly the same thing, I'm sure it's a software problem, can anyone help?

  Mark

  Well, after several calls to ATT and a few stops at the store, there was a new feature added that upgrade, that I didn't know and I really don't think very well received by anyone who deals with BlackBerry.

  The small LED light at the top of your blackbeery now is how you turn on the keyboard light when it fires. It works most of the time, but I think it's a pain the * beep *. But who am I... Laughing out loud

  So when its dark outside or you need the keyboard for you put your finger on the little light LED light at the top and the keyboard lights up.

  I think everyone should say blackberry this new battery additional economy feature sucks.

  It took me 3 weeks to get this figured out... Laughing out loud

• ADOBE CC - Customer Service fail to resolve my problem (curves) and compensate for them.

  Event history:

  23 February:

  I discovered that Adobe Photoshop 2015 CC had a problem with the program

  -J' I import my raw image

  -Apply the curve

  -Curve pen

  -Save as a PSD and JPG

  -Image on the PSD and JPG file appear with no good hard and curve lines.

  I report this problem to the Photoshop customer service, they said, it was a problem to update. I uninstall and reinstall... She still took place. Customer service suggested that I use Photoshop 2014.

  I paid over 100 dollars for old hardware? I didn't think it was just... anyway. I waited.

  March 4:

  I reinstalled 2015 and the black lines were always there.
  -J' have customer service message, they acknowledged the problem (bug) and assured me that the problem could be solved on the next update.
  -The update for adobe Photoshop was in November... (at this point I'm still paying)

  -They recognized this was not my fault and gave me a 30 day extension.

  
  30 days after I requested additional since an extension I was using a lower quality product. They do not allow this. Now, I'm upset.
  Not only am I paying full price, I pay for something less.

  They referred me to a (top team) B.S. that would respond to my inquiries about the problem...
  A came response where I was told that I was unable to get the extension... The end.

  What kind of service is that? Still, I have black lines on my jpg files and cannot produce impressions of Adobe Photoshop 2015! I will not be satisfied with something obsolete! What is the point of subscription if I don't get to use the latest software?

  I have attached a picture for example, nothing special. It's not supposed to be a hard line on my image, but each image that I recorded with changes product LINES TOUGH! * Note This is a PSD file, but jpg files save and print the same!
  

  If you have a solution... I'm all ears, because the Adobe creative team can't do anything for me and will not compensate for me either.
  If you are interested in the transcripts between service customer and I have... I have them.

  Just out of curiosity, you reset the Photoshop preferences? Worth a try.

  Manually; course may be cancelled:

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

  Fast; cannot be undone:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  In addition, as Warunicorn says, check updates of system which may include new graphics drivers.

  If you continue to see the problem, you could post a bug in the feedback.photoshop.com report

• Motherboards and keyboards for laptop computer Vaio model: SVE171E13M

  Hello

  My name is Mark.

  I am aware of the fact that Sony put an end to the production of portable vaio, but I still want to know if Sony always produces keyboards for portable Sony Vaios and motherboards for model: SVE171E13M? I would appreciate a response.

  Thanks in advance!

  Select this option.

  Hi BowlinMark,

  Thank you for considering the Sony community!

  For models/customers in the United States and in some countries, we usually refer them to https://sony.encompass.com/ or contact here for parts and accessories of their Sony devices. Unfortunately, your Vaio SVE171E13M was not recognized by our system. No doubt this isn't an American model or it's just the chassis number.

  Since you are outside the United States and most likely, the unit is not as well US, please recommend our website world of Sony for more information contact the Sony Support Center in your area to the http://www.sony.net/SonyInfo/Support/ for further assistance with your question.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• problem printer and scanner for photosmart C4680

  When you try to start the photosmart C4680 printer a message to INSERT in CARD MEMORY askes, that I have not and never needed before.

  It does not print anything but empty sheets of paper and wants to digitize uninvited.

  Need serious help, thank you.

  Hey herbst and thanks for the reply!

  I would recommend running the following updates:

  Utility software update from HP

  Critical update: can't find image files or a document scanned once the scan is complete

  Fix printing software HP when upgrading Vista to Windows 7

  Please hold me!

• Update problems - touchpad and keyboard do not work!

  After you install an update, the touch pad and the keyboard on my laptop won't work.  I was able to use a wireless mouse, after a few failed attempts.  Any suggestions?

  Hi jennkjohns,

  1. what happens when you connect the keyboard to the computer?

  2. what update has been installed on the computer?

  Method 1

  First of all, I would say you visit your laptop manufacturer's website to download and install the updated driver for the touchpad and check if it works.

  Check in the Device Manager, the State of the keyboard.

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Method 2

  Checking update was installed before that the problem occurred.

  (a) updates installed open by clicking the Start button, click Control Panel, click programs

  (b) and then, under programs and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the link below to learn more about how to clean boot in Windows XP.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart C309a problem software and driver for Windows 7 64-bit w/IE8 browser.

  When I down load and install this software, the HP Solution Center is not install or download completely.  When I open the HP Solution Center, everything I see is logos and touch the bars, there is no wording or lettering anywhere in the window.  I downloaded with Antivirus off and on.  I am running Microsoft Security Essentials Antivirus.

  You have installed Adobe Flash Player on your PC?

• Satellite A300 - problem of touchpad and keyboard

  Hello I have a problem.

  The first time I start the computer, the touch pad and the keyboard Don t run, and I need to connect a usb mouse to restart the computer. And in the second time, the keyboard and the touchpad to work correctly.

  I have a Toshiba A300 and I have Windows 7 Ultimate 32 bit
  This who could I do to fix this?
  My English is very bad, but I hope you understand me and that you can help me.

  Greetings!

  According to your message, you have to restart the laptop in order to get the keyboard and the touchpad works properly.
  There may be something wrong with the drivers for the keyboard and the touchpad
  As a first idea I would recommend to update the operating system.
  This means that you should check if a new installation of the OS could solve this problem.

  Keyboard driver is part of the Windows OS, so I think this should be verified.

• Problem with the keyboard and audio on Satellite L40

  Hello world
  I just installed XP SP2 on my Satellite L40 (BTW thanks to all of you who helped me overcome the problems during this operation with your son), but I have a problem with my keyboard. I have a QWERTY keyboard and after I installed xp, he worked as a qwerty, I fixed it, now all my letters are working very well, but I have some problems with certain symbols, such as @,., _, if you understand me.

  Could someone help me?

  I also have problems with my audio, in fact I have no sound at all, in the Panel, he said that there is no audio device found.
  I've seen a few threads which said that I should first install kb888111 and another thing is likely, but I can't find the other. I downloaded the audio driver from the toshiba Web site; Thank you for helping me in this area also.

  Good bye

  I have the same problem with the sound... I found hotfix kb888111 and I instaled this one... but when I tried to start installing driver sound a window popup say thet there is an error and cannot continue with the installation driver...
  I found hotfix kb888111 in this file that i have downloaded from the toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2...
  I don't know what to do... Someone else knows...

• Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

  Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

  Thanks for your reply but I've solved the upgrade Viata HP to W7 HP Viata in Spanish. Took a lot of effort but is workig now. My major concern is on the regional setting: my country is Venezuela and this is probably the only country that is missing from the long long list so I now have problems in the keyboard language and the motto puntuation. This has nothing to do with the Home Premium edition or full, I think it's just an incredible mistake. How can this be repaired? MS will have remedies this problem and probably to publish an update to fix this problem. Thank you again and hope that this question goes to MS. looks.

• Problem with KEYBOARD for notebook G42

  Keyboard on my laptop has a problem. right shift key and arrow keys do not work. How can I check if it is a software problem or a problem with the keyboard. If the keyboard is a question where and how we get the keyboard made for this model.

  Please answer.

  You have the problem if you connect an external keyboard? If the external keyboard works, I remove the keyboard and look at the part number and then search on eBay, Amazon etc. Do not do this if your machine is under warranty. Contact the HP customer if it's still under warranty.

• Windows NetBook 8 HP 2000: keyboard for computer problems 2000 hp laptop

  I have a pc hp laptop black 2000 which has a majo keyboard problem. his ubuntu 14.10 running now but the problem started when he as always windows. almost none of the keys work. some but no longer.  i don't know if it can be fixed or if I need a new keyboard. can someone so I don't end up disassembled without reason? Thank you!

  Hi @johnnyC777

  Thank you for your query.

  I understand that you have a problem with your keyboard does not.  This appeared when running Windows and has remained since the installation of Ubuntu.

  Linux is not supported by HP.  Here is a link to Ubuntu Support.

  You can search for an updated driver.

  If it must be a hardware problem, you can try to clean your keyboard.

  HP laptop and Tablet PC, cleaning of the guidelines.

  Cleaning your PC laptop

  If you are in warranty or would be like service options, please contact HP support for assistance if the problem persists.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  If you believe that the keyboard needs to be replaced and that you would like to do the repair yourself, if you provide your exact model, I'll try to find the guide service and maintenance for you.

  How can I find my model number or product number?

  Good luck!

• My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.

  My son used my daughter and wifes UAC because I had his safety to tight to his liking. My wife and my daughters both UAC accounts saying now that they have multiple problems and insufficient for memory.  My UAC (admin) is fine. I opened his account and it's good? It seems to me that all UAC accounts would receive if it were a virus? My wife and my daughter lost all the photos and several icons on the desktop. The Help window opens automatically when you connect. The two seem to have lost the Explorer, I am at a loss. Any suggestions?

  Hello

  'insufficient memory' and hidden data

  If this is the case you can be infected

  read the error messages wrong than some malware product to try to rip you off at the link below

  read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _______________________________________________________________

  otherwise, the foregoing:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.