Problem starting Aurora ALX of R4

The system was purchased about 1.5 years ago.  Other than the problem "Alien-head and collar light remains lit after turning it off," I had no problem with it.

About 3 weeks, began an intermittent problem.  When I turn on the computer by pressing the power button, the computer began (with the fans running, hard drive light flashing... etc) with the normal beep but, from time to time, the monitor doesn't give 'no signal' and stays black.  Otherwise anyone on the screen, the only thing I can do is a "hard stop" (ie pressing the button market for a few seconds).  I might have to do this 1 or 2 times before having to return the signal.  At this point, I get the message 'abnormal termination of window.  I choose "normal startup" and then go to the office with success.

Things I did and said: -.

1. replaced by a new DVI - DVI cable but the problem remains

2. replaced by a cable DVI / VGA but the problem remains

3. I tried a second DVI output port of the graphics card but the problem remains

4 tried another monitor but the problem remains.

These 4 tests seem to be saying that the monitor and cable are good.  The question seems to be elsewhere.

-I can't reproduce the problem at will.  It happens every day.

-Once the computer sends a signal to the screen, all right.  So, the problem is still in the computer, commissioning.

-I can hear the beep, I think that the computer going to phase POST successfully.

What could be the cause?

I appreciate any feedback and comments. Thank you in advance!

You can send me a private message with your Number of Service and contact information once you have determined if one or two cards must be replaced.

Tags: Dell Products

Similar Questions

  • Problem starting r4 Alienware Aurora ALX

    My Aurora ALX R4 doesn't start, the GET really loud fan and nothing happens. Sometimes it restarts the process. I need help badly

    Yes, this seems to be the serial number - please go ahead and delete your post...
    This is sensitive information

    And Yes. the PCI shroud covers the CMOS battery. Try to do this first.

  • Aurora ALX won't boot SSD

    I have a new chassis ALX that I built and exchanged components of my R4 not of Aurora ALX. It does not start on my Crucial SSD M4. My original thread was about the swap, but I encountered this problem now that the swap is completed. My R4 had bios A11, while the new motherboard in the ALX has bios A08. The unit starts and goes to the start screen for Alienware with post beeps, but does not load Windows on my SSD and I get an error stating "non system disk or disk error." It has been suggested that I have install my motherboard the original R4, but I really hope that there is another way to solve this problem.

    Yes I am good Cass. Thanks again for all the help. I'll do a clean install of Windows 7 Pro at a point and move. Now, except for a few small problems, everything is good. The seller sent me a new motherboard and card MIO. Sold my old case on eBay too, except that the buyer is resembling a deadbeat because he has not paid after 3 days. Oh well-REList time!

  • Alienware Aurora ALX during POST stop

    The product support page:

    Aurora ALX

    I7 - 920 2.66 MHz

    NVIDIA 240 sometinsometin, can not learn more about the cards themselves

    Delivered in 2010.

    Basically, when the computer starts, the fans kick into high gear, the leds light up everywhere, fans slow gradually over a few seconds and then shut down the computer and restart the cycle.

    I removed the cards, hard drives and RAM.

    When there is no RAM, I get a beep code meaning 2 RAM has not detected, of course.

    The RAM and no video card or the HARD drive, back to the problem of start and stop.

    I guess that the CPU is ok since POST to check the memory live.

    The power supply might be dying, or a problem with the BIOS, or a thermal sensor could be dismantled and act as if the computer is overheating?

    Thanks in advance for your help.

    Probably get a better response if you re - post it in the forum of the Club of Alienware .

    Be sure to include the version of Windows.

  • Strange problem with Aurora R4

    So I got my new Aurora R4 about two to three weeks, and everything seemed to go well for the first week, until I started to run games like The Witcher, Civilization V and dues Ex: Human Revolution. When I try to run these games I can get anywhere from 5 minutes to an hour into the game, and all of a sudden the entire system turns off and then turns back on.

    Whenever he starts the fans are stronger than they were the first week and making a slight rattling too. I have run all diagnostic tests that suggest Dell through their support pages and others that my CPU is running consistently between 50 degrees Celsius and 58 degrees Celsius (temperature BIOS), everything else seems to work at normal parameters. I took off of the side wall of my case of ALX and checked everything, seems ok. Even with the stop sign, The Witcher can only run for about 40 minutes.  So I don't think it's an overheating problem.

    The little green light on the power supply goes off when the system shuts down as well, so I wonder if it is maybe a power supply problem, or my take? I have not checked the other outlets in the House yet, but she stops whatever one I use in my room.

    My specs are:

    8.1 Windows 64-bit

    Intel Core i7 - 4820 k

    Radeon R9 290 x 4 GB GDDR5

    16 gb Quad Channel DDR3 1600 MHz

    Motherboard MSI Intel X 79 of the Express (not sure what an Alienware uses)

    Alienware 875 Watt Multi GPU PSU

    Alienware Aurora ALX case

    If anyone has any advice, any suggestions on how to fix myself, please let me know. Even if I can refine what the question is, who will really help when I call a technician to Service from Dell.

    BrandonGeiger
    all of a sudden the entire system turns off and then turns back on.

    That looks like a problem of "lack of power".

    Assuming that the power supply wire colors indicate the 12v rails goes video cards:
    Try again with a power of each set wire connector at the same time.
    Sense, with one card...
    Use either P15 or P14
    and ALSO
    is P17 or P16

    New with warranty? Of course, call the helpline and use your warranty (but still not above).

    Now, if it is on the contrary crashing (without showing the BSOD)... usually pointing to a hardware-core problem.

  • You want advice in the sale of 4.5 years old Alienware Aurora Alx

    Hi all

    Just for starters I don't have much experience with computers, computer hardware, etc. I intend to do a lot of research before I make any final decision on my desktop but my plan is to sell and look for a laptop. I appreciate all the advice.

    I have an Alienware Aurora Alx desktop computer (late 2011) with an Intel core i7 cpu 920 @ 267 GHz, 6 GB of RAM installed. I have 2 GPU AMD Radeon HD 5670 connected with AMD crossfire.

    I run a ton of different games on this issue at the highest graphics settings without any problem, Civ 5, LoL, cities: horizons, CS, Dota 2, Arma 2 and rocket League to name a few.

    I'm looking for just to get advice on the price range, where to sell, how to find buyers, etc. Any help is welcome and appreciated. Thank you for taking the time.

    You can compare your requirements with those of eBay. It is generally a good way to find a range of prices.

  • How to replace a drive to an Alienware Aurora ALX with 2x1To R1 discs

    Hello.

    I have an Aurora ALX with two 2 1 TB HHD in Raid 1 and I need to replace a drive for a new.

    Could you please let me know what is the procedure? I installed Intel Raid Manager. It is supposed to automatically rebuild sets after I installed the drive and starting the PC, but I want to be sure, that it is the correct procedure to to rebiuld Raid group.

    Please let me know if you need any additional info.

    Thank you.

    Assuming that your computer is currently operating in RAID 1 with an array degraded due to a faulty disk, replace the defective drive with a good drive at least as large as the original drive system will be automatically rebuild the RAID 1.  It's the usual approach; You should not need to take special measures to rebuild the table.

  • Alienware Aurora Alx? I think so

    you have my self aalienware aurora alx? In my view, because there is no s/tag number? and is not on the motherboard and now I have a problem with the jury alienFx pc with not picking up it works so not now but he didn't? so my alien is i7 965 EX, with 16G of ram, 450-two 2 G Geforce gtx, the motherboard is x 58-04vwf2 my board alienFx 1.1 and m bios: A02 but do not know if this is good for my pc is? can anyone help as had no lights, skylights BD - dvd is on and all those in the pc and had no time? thermal regulator and got no coloers in alienFx?

    zuluowls

    He just tried run Dell Diagnostics (outside Windows) everything that is not spent only one thing, he said that the fan was running at full speed?

    1. do you show it a part dedicated to the MIO Board of Directors. Did you use it to test and change the lights?
    2. what MIO-Board connected to MB_USB-1 motherboard header?
    3. is it an ALX model after all? If so, try the AA batteries (for interior lighting) in order to get a good "power dissipation" reset/fix to this issue.
  • I want a new Alienware Aurora ALX to have double EVGA NVIDIA GeForce GTX TITAN graphics cards in SLI config. Is this possible with the latest ALX Aurora motherboard has?

    I buy my fiance an Alienware Aurora with these stats:

    Base: Alienware Aurora ALX 875W matte black frame w / AlienFx ColourPre
    Processor: Intel Core i7-4960 X processor Extreme Edition (6 cores, 15 MB of cache, up to 4.3 GHz overclocked)
    ASETEK liquid cooling CPU
    OS: Windows 7 Ultimate SP1 64-bit
    Graphics card: Double 6GB GDDR5 NVIDIA GeForce GTX 780 SLI
    Memory: 32768 (4X8Go) MB 1600 MHz DDR3 Quad Channel
    Hard drive: 4 TB RAID 1 + 0 (4 x 2 TB SATA 6 GB/s, 7200 RPM, 32 MB of Cache)
    Optical devices: 8 X RW Blu - Ray (Blu - Ray, DVD, CD read & write) & 24 x DVD +/-RW
    Sound card: Integrated HDA 7.1 Dolby Digital capability
    Speaker system: Logitech Z506 5.1 Surround pregnant 75W Total
    Game keyboard: UK (QWERTY) Alienware TactX keyboard
    Gaming mouse: Razor Naga Molten
    Two monitors: 2 x Dell UltraSharp U2713HM 69 cm(27") LED monitor DVI, VGA, HDMI (2560 x 1440), DP black UK

    I went to very difficult to leave my boyfriend to buy this pc.  First of all, that we now live in different countries.  I live in the United States and he lives in England.  We met on a PS3 game online called DUST 514 and played a lot of pc games together as well.  It is difficult to have to steal it back, but we're getting married soon and I'll come to England.  He needs a new PC for years and was jealous of my Alienware Aurora R4. So I decided to buy one that is still better than mine since it's even greater player I am . This will also allow us to play more games together .

    Then I he wired the money and thought that everything would be ok, but you wouldn't believe the amount of screw - rises, that Dell threw on him!  They had even cancel a bunch of commands of the peoples, b/c, trying to control his spec-ed on Alienware has revealed a major screw-up affecting many clients... (Sorry, it made me delete/modify-this until his order passes through.  Dell representatives were concerned about what happened past.  I don't know if they told people that they had to cancel the real reason why orders and the possible impact on customers with currently Alienware Aurora...  I'll tell you what they have done after that his order is finally through.  Just a hint... inside your Alienware Aurora, check if you own to make sure that everything you ordered is actually there...)  He tried to do this for a week now...  I thought Dell was a little better than that... I knew they had bad grades, but really?...  In any case, it is a complete system stressed mess of it all back and on phone calls and e-mails with different people of Dell.  So I thought that, if it still manages to get the Alienware, maybe I can do even better!

    He really should have an SSD, so I'll get a. He was talking and drool on the maps of Titan, so I'll give him two EVGA NVIDIA GeForce GTX TITAN Superclocked 6 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express cards in SLI config! : http://pcpartpicker.com/part/evga-video-card-06gp42791kr

    I've never built a pc or tinkered with all hardware.  I want to make this even more impressive pc by adding an SSD.  I think I can install an SSD without any problem (I want the Samsung 849 EVO Mz-7TE1T0BW 2.5 "1 TB SSD)... Oops... I just thought of something... 4 TB SATA is actually 4 2 TB SATAs, put in place with 2 as the mirror...  I think that there are only 4 connectors for extension for SSD/HDD... Is this correct?  I have to replace one of the SATAs 2 TB with the 1 TB SSD?  What configuration I would define then the three SATAs 2 TB?  Would it be to say that he would have only 1 TB SATA? Could I set up so that it has SATA 1.5 TB (with SATAs split with half active and part of the half of the mirror for a RAID configuration)?  Furthermore, I have really no idea what RAID is or fact, just that you only half of total storage really active and the second half is as a backup in case of failure of a disk or something to avoid any data loss total... It is also the thing that I'm confused about that I don't know if it is also possible to install two graphics cards of Titan in SLI configuration on the micro ATX motherboard, I guess its Alienware Aurora will be, and still less 1 Titan.  Yes I know it is exaggeration lol, but the game is very important for us, especially since this is how we met.

    Sorry for the long post... Finally, the MAIN POINT & QUESTION:

    I have to install a different motherboard like the Asus Rampage Black Edition IV: http://pcpartpicker.com/part/asus-motherboard-rampageivblackedition in order to install two Titan GPU in SLI configuration?  If so, how this O_o...?  Also, I heard that there is a 'girl' Council that controls the Alien FX LED lighting and ventilation Active... How to connect to the new motherboard (if I need to get a new one)?  Also if I get the other motherboard (if this motherboard work with everything) this motherboard would have space for 4 x 2 TB RAID 1 + 0 and the 1 TB SSD SATAs?

    Please answer.  Thanks, ~ value

    Setsuka
    to install two Titan GPU in SLI configuration?

    Don't know why you config-ed with two years 780 in SLI if you want two Titan-SLI but this guy did:

    http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19512935/20402844.aspx#20402844

    Personally, I'd keep just 780 - SLI, since the two configs end up being very similar to the performance. Either they're going run hot (in the game of max.).

  • Where to get the old aurora ALX drinking?

    I finally fixed a problem had my ram whereall is not being read, and before attaching it I thought that perhaps a bios upgrade would do (actually I just need to extract them and put em in a few times) but since I have upgraded to the new bios I constantly have my pc freeze forever.

    long story short I want to see if my PC is most stabe on an older BIOS, but every time I search for older versions on dell (ALX) I only see A11.  I can just dl any bios has # for the alienware pc?

    http://FTP.Dell.com/published/pages/Alienware-Aurora.html

    Aurora and Aurora ALX use same BIOS (within each "Release" machine or model).

    For Aurora ALX of R1 R1/Aurora (Intel 9xx and x 58 chipset) I like A09.

    He has a good chance of bricking or kill your motherboard. I suggest to do the more complicated way of exterior windows to increase the chances of success.

    http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19405753.aspx

  • SE error message: "Run"DLL"there is a problem starting. C:\Users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

    Get the below error message every time I start my computer:

    Run DLLS
    There was a problem starting
    C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
    The specified module could not be found.

    Hello cuefox, thank you very much to judge me.
    We're here to help.
    Continue to browse the web with Firefox, thanks once more.

  • Printing in 2 programs problem started 2 days ago, only firefox works fine with Internet Explorer?

    Services Bank web site has a "Print - Friendly View" text, on the top right of the page that displays the account information in a different format if you click on the text. Printing all other functions work ok. The problem isn't when you use them Internet Explorer. The other program is on the Aflacs website, and the problem is very similar. When I click on the text stating "Print copy of invoice", nothing happens, as the text of the Bank. Both work perfectly with Internet Explorer. The problem started about 2 days ago. When it works well, a window will open and show you what it will print and you click on the text "print", and it prints. Any help on this problem will be greatly appreciated.
    Thank you
    Joe Anderson

    You have this problem when running in Firefox SafeMode?

    http://support.Mozilla.com/en-us/KB/safe+mode

    Do not choose anything at the moment, just use 'continue in safe mode.

    When in Safe Mode...

    • The State of plugins is not affected.
    • Custom preferences are not affected.
    • All extensions are disabled.
    • The default theme is used, without a character.
    • userChrome.css and userContent.css are ignored.
    • The layout of the default toolbar is used.
    • The JIT Javascript compiler is disabled.
    • Hardware acceleration is disabled.

    If this is not the case, see this:

    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

  • Satellite C670 problems start after upgrade of Windows 10

    Hi all

    I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

    Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
    Impossible to do a spanking Granny restore F8 or F12 nothing to do
    If someone gives you the solution I'm interested
    Thank you, CDT


    Validation has been translated by Google Translator

  • My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

    My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Qosmio F60 - hibernation of freezing and problems starting

    Hello...

    The problems started when my computer goes into hibernation mode and when I press the power button to launch once again, it remains frozen.
    I then press the switch to turn on it works again.
    Option just to start normally or in safe mode.
    Either way comp freezes in the middle of loading and I must push the switch down to the Tower model

    Then the new restart msg saying there is a problem in the start menu and asks me if I want to solve the problem
    I click Yes and a number of things have happened several times:
    (1) computer sets and loads normally
    (2) computer says he can not solve the problem and continues to load correctly
    (3) the computer freezes in the middle of loading or during the process of setting
    (4) computer sets and restarts but crashes in the middle of reloading

    I often have to go through this time half a dozen before I can load normally

    either way my norton antivirus has been come with messages saying I need to reactivate (my subscription is not exhausted) or an error has occurred
    have done a full virus scan - none found

    is this a virus problem? I do a system restore? any other advice?
    help much appreciated

    Hi kkle4,

    You use the preinstalled version of Windows 7 in Toshiba? I can t find any information in your posting on OS :(

    Otherwise I agree with Akuma and you should check the BIOS version and probably an update would be useful. Before you begin to update of the BIOS here are some useful tips:
    -Close all running programs (also, antivirus, firewall, etc.)
    -Make sure that you are logged on as an administrator
    -Unzip all files from zip archive
    -Connect the AC adapter before you can update the BIOS and make sure the battery is fully charged

Maybe you are looking for