Problem to Keithley 6485 picoammeter to communicate with the PC. Receive code timeout error 1073807339 or BFFF0015 at initialization.

Similar Questions

• Printer problems. Error "computer cannot communicate with the printer.

  I had problems to access Windows Explorer and the rep Dell IT installed Mozilla Firefox 4.0 Beta 10 for my Windows Vista as an alternative.  Now my Dell AIO 946 printer does not work.  Whenever it is fixed, it prints until I am notified to download an upgrade of the system.  After that I downloaded the upgrade, the printer does not work yet.  The ink cartridges will not align.  I get a message of "remove stickers ink", which is clearly not the problem because the cartridges are not new.  Now, I get a message that says "computer cannot communicate with the printer.  I re-installed the printer several times, disconnected from the power source and the URL and re-connected.  Nothing seems to work.  Any positive advice will be appreciated.

  grandmainontario,

  You can copy a document under the glass? B & W and color?

  If so, executing delete print jobs to remove items stuck print jobs in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Download the Vista drivers.

  Install the Vista drivers. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

  You will find links to the patch/drivers to...

  Reference Dell 946 Photo all-in-One Printer owners thread (W7)

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  You can also read...

  You cannot print or preview before printing a Web page in Internet Explorer 9

  Rick

• Having problem to communicate with the Dns server.

  Hello everyone, I'm having problems with my connection when I click Connect to the network diagnose it shows me this error message.

  "cannot communicate with the server of DNS (218.186.1.58).

  I'm a fall of MMORPG and disconnect from the internet, when I was playing or surfing. Can someone help me solve this problem.

  Hello Spiffie,

  You can try to uninstall the Windows Update on March 11 to see if that solves the problem.

  Remember that uninstalling the updates may require restarting the computer to complete uninstallation of the update. You will be notified to restart if the update does.

  Please post to let me know if this helps J

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• Unable to communicate with the printer HP 4630

  Continue error message of "Unable to communicate with the printer." Even when connected by USB.

  Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.

  I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?

  Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...

  Help!

  Hi @PKahn

  It seems that the computer does not recognize the print driver.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Unable to communicate with the printer hp deskjet 1000

  I have used this printer for almost 2 years and problem say never FAILED before... forst my text printing is distorted then he showed in offline mode and later its says printer is ready, but when I give the command of printing... it said 'cannot communicate with the printer.

  Pls help!

  My problem was solved by removing and reinstalling the drivers... .any way thanks for your help

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• Fail to communicate with the controller of pump ISCO D series

  Hey everybody,

  I have an ISCO D pumps controller (which is connected to a syringe model 100DX ISCO pump) series I want to control using RS232 on Labview. I don't have their LabView Toolkit that Teledyne has mentioned in their technical Bulletin (TB06). In addition, I would like to automate my test, so using the Labview Toolkit will be not too useful.

  The problem I face is not being able to communicate with the controller via hyperterminal or LabVIEW.

  I ran their (mentioned in TB06) integrated series test and communicate as expected. I also tried to run their program remote pump (mentioned in technical Bulletin 19 of Teledyne - TB19) which seems to do what is expected as well.

  I tried to talk about using LabVIEW first using the vi that I joined, and I saw nothing on the buffer. So, I moved to hyperterminal.

  But when I try to send the command 'remote' listed in TB19, it doesn't seem to do anything. There is no answer on the hyperterminal.

  There is mention of a DASNET Protocol, and I found the .dll file that I also moved in my Windows System 32 folder. It did not work even after that too.

  I have attached TB06 and TB19. Let me know if you have other ideas how to do to test it.

  Please let me know if you need further information.

  Thank you

  Sandeep

  Hey everybody,

  After going through their best manual, I found the way to correctly send a frame. The manual at, www.isco.com/pcfiles/PartPDF/SL000004/UP00194U.pdf, section 7 specifically, it is intended.

  For the purposes of anyone who stumbles across this thread, here's an example.

  If you have your.

  Destination (the pump regulator) ID = 1

  the source of the (computer) message = 00

  and you try to send the message to DISTANCE that would turn the controller in "REMOTE" mode

  Then you would send '1R006REMOTE1B', where 1 is the ID of destination
  R is right to recognize the previous received message

  00 is the ID of the computer

  6 length of command

  "REMOTE" the command itself, must be uppercase

  Checksum 1 b (which changes with the command of course)

  And you can do the same thing in LabVIEW, you can enter '1R006REMOTE1B' in the VISA write while keeping everything else the same as the snapshot of the vi I sent previously.

  Dennis, actually do not have the CD itself, but I assumed, would nothing more than an executable since I downloaded the demo driver for LabVIEW (http://www.isco.com/products/appnotes.asp?PL=105 under utilities) pump. I am currently trying to locate the CD here at the lab, and I will update this thread if I find something useful.

  I guess that my problem has been resolved.

  Thanks for your input in this Dennis.

  Kind regards

  Sandeep

• Aspire laptop will not connect to the wireless printer, he said: he can't communicate with the printer

  I have a laptop sucks and when we first put in place it would print to the printer wireless, but now he says that he cannot communicate with the printer. I know just enough to get me in trouble with computers. Any suggestions?

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. which version of the Windows operating system is installed in the computer?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you use Windows 7, then I suggest you to go through the steps in the link and check.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Failure of the assertion when using Labview ActiveX functions to communicate with the dll

  Hello

  I'm looking for suggestions and tips about the following error that I get when I use .NET Labview functions to communicate with the dll written in .NET environment. I just need a starting pointer on where can I search for the origin of this error. I am a newbie in. NET.

  

  I am also attaching the .vi I use, if this is of any help. All suggestions are welcome!  Thank you.

  The origin of the error found after studying the examples provided by the OR .NET. The callback function had to be moved out of the loop, which solved the problem.

• Error: "unable to communicate with the TWAIN device" with brother MFC7820N

  Original title: can I connect a scanner through a switch?

  I'm trying to analyze something like I did it many times with my brother MFC7820N hung on my tablet. But recently, I replaced a 2nd router I had in my system that failed with a new Dynex switch.

  I have my internet modem and 2 computers connected to a Linksys wireless router. I have another ethernet cable connecting the router to a new switch. I have my 2 printers attached to the switch. One is a Brother HL-2700CN color laser and the other is a brother MFC7820N mutli-function. It use PaperPort to scan stuff on him, since provided on the CD with the device.

  So today I open PaperPort and click the Scan button and it appeared an error saying unable to communicate with the TWAIN device box.

  So I clicked on a doc shown in PaperPort that I had scanned a few weeks ago and I click right and select Print and printed to this MFC7820N.

  Then I come back to click on scanner again and yet again, it appears that box. So I watch and WIA-Brother MFC-7820N LAN is displayed in the Scanner marked drop-down list box. So I switched the power of the MFC and tried again and it still appeared that same box again.

  OUCH! I'm going nuts! You have any ideas?

  Hi Jeff has Davis,
   
  Method 1: Uninstall and reinstall the driver again and check if it helps fix the problem.
   
  See this article for more information:
  How to manage devices in Windows XP
   
  Method 2: Try the suggestion given in this article:
  'Could not enable TWAIN Source' or 'He has not find scanner' Error Messages are displayed

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880