problem to open a file, .tiff due to lack of memory

Similar Questions

• Problems to open the file in Windows Moview Maker

  I work on a Windows Movie Maker file last week, upload music, photos and video clips and count the final transitions. Never had a problem opening the classified. Today, the file will not open. The answer I get is:
  "The file was created by a version of Windows Movie Maker that is not supported." Why is - what happens after 6 days of work on this project?

  I worked on a Windows Movie Maker file last week, upload music, photos and video clips. I'm almost done with the project and start the final transitions. However, today, I was not able to open the file. The answer I get is: The MSWMM was created by a version of Windows Movie Maker that is not supported. "Why is - what happens after 6 days of working on this project without any problems. Please please help.

  =======================================
  The project .mswmm file seems to be corrupted. I feel
  you have to start over.

  Large, complex projects tend to cause problems... the best bet
  would be to create several small projects, Publishing (economy)
  each of them in the format .wmv movie to a folder on your hard drive
  drive and then re - import clips video .wmv collected and
  combine them into a final video file.

  Or... import clips .wmv in creation of DVD and each Let's
  become a scene (chapter), you can have up to 18 scenes.

  FWIW... many file formats are would have been compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problems to open PDF files after the upgrade of the file server for 2012 R2

  Hello

  This weekend we have improved our main Windows 2003 to 2012 R2 file server.

  Since the upgrade, users (including myself) cannot open a PDF of the file server.  If I double click on a PDF file, it opens as usual, but if I double click a different PDF, the acrobat reader flashes (in the Task Manager I can see another instance AcroRd32.exe starts and stops) but the second document does not open.

  If I close the first document and then try and open the other, and then it opens without any problem.

  This only affected the opening of files on the new file server, opening several files on a local disk is very good.

  If I disable 'enable protected mode at startup' then I can open several documents of the file server.  I would prefer not to have to do.

  Users are using Acrobat Reader 11.0.10 on 64-bit Windows 7 and Windows 2008 R2 Remote Desktop.

  Does anyone have any ideas, it may be the cause?  And does anyone have one solution other than to disable the protected mode?

  Thank you

  Joe

  Hello

  Try the latest Adobe Acrobat Reader DC and check if the problem still exists or goes.

  It can be downloaded from Adobe Acrobat Reader DC install for all versions

  Thank you

  Shakti K

• Problem with opening the files after the installation of creative cloud

  I am under creative cloud in Windows 7. Since the installation of CC when I double-click on a file icon the program opens but the file is not. I can only open the file on the file menu in the program. Very inconvenient. In addition, Acrobat now displays the error message randomly, "Acrobat failed to connect to a DDE server. Does anyone have a solution to these problems? Please notify.

  Hi Rhaydn,

  Test to see if you get the same behavior in a new user account with administrative rights. What types of files and programs were a double click when the application open but not the document? For the question of Acrobat, I found this thread

  http://forums.Adobe.com/thread/416414

  If this does not help, I recommend posting on this thread as well as anyone the problem.

  -Dave

• Problems with opening the file with while loop

  Hello everyone,

  It is probably a quick question, but I know how to open data files in Labview. The attached code works if you enter a file from the folder on the front panel button. However, if the path is empty and you press the run (arrow) button, a dialog box appears and asks you the file.

  I select the file, but the dialog box keeps coming back. I think it has something to do with my while loop. Can someone tell me where I'm wrong?

  Thank you!

  TheLT

  
  

• Problem in opening some files

  I have 'Windows cannot find' - ' C:\WINDOWS\system32\rundll32\.exe when I try to open "Add or remove programs" Control Panel. " Is there a repair?

  It has also arisen while trying to open other files

  In the Run dialog box type: sfc/scannow, and then click OK

  You will be prompted to insert your CD of the OS

  If you do not have your OS CD follow the instructions below.

  Go to the control panel
  Folder options
  View tab
  Highlight: uncheck "Hide protected operating system files" and click on apply, click OK

  Go to the menu 'start '. Click on 'my computer '.
  Double-click the disk "C:".
  Double-click the "Windows" folder
  Double-click on the "System 32" folder.
  Double-click the "Dllcache" folder
  Locate the Rundll32.exe file, right-click on it and select "copy".
  Click on the 'Back' button in Windows Explorer to return to the "System 32" folder.
  Right-click any open space, and then click "Paste".

  Back to: check "Hide protected operating system files" and click on apply, click OK

• I can not open JPEG files. When I try to make my computer goes to the word and gives me strings of unreadable code. How can I correct the problem and open JPEG files?

  Cannot open JPEG files. Computer to the word when attempted and gives the unreadable code strings. Corrective action?

  The file association seems to be incorrect.  To rememdy this...

  Right-click on any jpeg and select 'Open with' in the menu.

  From there, you should have several options, select Windows Picture Veiwer or anything that makes sense on your pc.

  If it opens correctly, close it, and then right-click again.

  Rather than choose the same program, at the bottom you should see "Choose program" click on it and select the application that worked, then check the box that says "always use the program selected to reopen this file type."

  OK out of there and you should be good to go.

• Problems to open RAW file (.) CR2) in photoshop

  Just updated my system (windows 10) laptop and downloaded CC.

  LR works very well

  PS works fine with jpeg files

  But the opening of the FIRST (.) CR2 files) causes a yellow screen:

  

  If I click on an image to open, the file opens as usual and can perform changes:

  

  Checked and updated graphics (NVIDIA GeForce 920 M), everything seems normal.

  Possible causes? Solutions?

  In the Camera Raw window, press Ctrl + K to bring up the preferences and uncheck CPU graph use.

• Problems to open CR2 files in CS2

  I have CS2 and have always been able to open the RAW files produced by my OlympusC5050. I now have a Canon S95 and photoshop does not open the CR2 files it produces. After some research, I downloaded a DNG Converter and used this. However, the results are far from good, resulting a very grainy image.

  Hi Jane,

  Your put questions on why the Canon S95 is noisier than the Olympus C5050.   There seems to be several factors:

  First of all, there are more pixels on the sensor of the S95, so each pixel is a little smaller, and one stray electron of the noise is a percentage more high maximum value of pixels each additional electron noise will appear a bit more highlight; However, in my view, there are the most important differences between your shots of Olympus green-water and your blue Cannon shots - water:

  Because the eye is more sensitive to green, photo sensors are designed to have twice as much green as red or blue pixels, so your green shots will have much more detailed that mask the noise.  In addition, when you balance of a blue more often turned to one that has more red, there is very little red at first, so no noise in the Red is magnified by several times and even with the blue, although that perhaps not quite as well.

  If you have a blue shot or a green shot with two cameras, so it would be easier to say what proportion of the increase in noise is due to the color of the light and how is something else.

  Anyway, I test to see if the format Conversion DNG using ACR 2.4 compatibility had nothing to do with whatever it is, and it doesn't seem to change what the image looks like, so it's not a factor.

  The main problem is that you're using CS2 and ACR 3.x which has the original Adobe raw conversion algorithm (and the worst), now known as process Version 2003.  Two Version of process have been since then: process Version 2010 increased the resolution of the raw conversions so that changing how work in general sharpness and noise reduction and process Version 2012 has added a new way to tone (Lighten/Darken/contrast/etc) images is easier to use once you get used to it.

  To illustrate the difference, here's one-by-side, which shows that the way CS2 does things left and the latest way 7/8 ACR or LR 4/5 path on the right, where you will see a more coarse texture and more noise by using the way of CS2 and a finer texture and less noise using the latest methods - click on the embedded image to see larger :

  

  In my opinion, the noise in the image on the left is too, and noise in the right image is deleted too, but I wanted to show how the values of 50% each slide.

  What about your computer and the version of LR.  Googling the number of brand and model that you gave and find a 2011 used-computer-to-sell listing with the specifications of the system, it seems that your computer is a Core2Duo with a processor clocked at 1.8 GHz and 1 or 2 GB of memory and you said Vista.  The new version of LR you can run on Vista is LR 4.x that might still be available on Amazon (to the United States at least), but you'd have a good snap up a lot more recent computer and LR 4 or 5 LR on it.  As a kind of i5 or i7 quad-core with at least 8 GB of memory.  It would be a few hundred dollars and a little extra if it's a laptop instead of a desktop computer with the same capabilities.  Make sure you get one with a screen of at least 768 size or maybe it's 800 or 900 pixels high, so you can see all the buttons on the bottom.

  Even if you think that, if you want to test how your current computer would work with the newest LR will run on it, you can download the LR 4.4.1 update and run in trial mode for 30 days, by how much you had or do you buy or abandon it.  Here's the LR for Windows download links - click on LR 4.4.1 a:

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

• Problem in opening a file specific exe on Windows 7

  I recently bought a new computer with Windows 7 Home Premium to replace my old computer with Windows XP. I have a specific program that I have used for more than ten years for web design. Bought legally online. Unfortunately, society is no longer exist, and the possibility of obtaining a replacement download does not exist, other than the natures offered free copies that are labeled with ads.

  I have the exe file of the program that I placed in the folder of the program since I have no installation disc. I can handle open the program, but it does not past that point - he just continues to run without opening the pages I work on. Thinking it was a Windows 7 compared to Windows XP problem, I downloaded XP using Virtual Box (a whole all except nightmare) and the program worked for all of an hour, but then, too, just kept running and not to open the pages needed.

  I ran analyzes viruses and malware on the computer. It's clean. Microsoft Fixit does nothing to correct the problem. Windows tells me that it is compatible. Place the file in the folder of the program created the problem? Anyone has any suggestions on how to get this program to work? I have to reconnect my old PC to edit my web site?

  EXE files in general can only be transplanted, they must be installed so that all the DLL paths and libraries and the supporting registry are included.  Unfortunately without installing it, Yes, you will probably not be able to use on your new computer.

• Cannot open pdf files downloaded due to the period in the file name (filename incorrect, says this is not a supported file type)

  My colleague from shared files with me through a flash drive, but a number of its pdf files included a period in the name of the file, and now I can not open them. Is there a way to solve this problem on my end? He is a colleague busy, and I don't want to ask him to pass through and rename all its files.

  Files with a period have the same name (next to this period) than the others

  files in the same folder? If Yes, then you can ignore them, they just Mac

  stay, no real PDF files.

  Monday, November 9, 2015 23:59, kimberlyh65876589, [email protected]

• problems to open PDF files

  When I try to open a pdf file that is sent to me or to my flash drive, I get the message "there was an error during initialization. An internal error has occurred. " I have to save it to the desktop and then I open it. I've deleted and reinstalled Adobe, I put in previous versions, but still the same. What is the problem

  Try to disable the Protected Mode [Edit |] Preferences | (Improved) security].

  P.S. This is a public forum; Please, do not post your e-mail address, telephone numbers, etc. !

• Problem with opening the files in CS6

  Hello

  When I try to open a new file in Photoshop CS6 in a part of the image appears, the rest shows itself as transparency. I have to close the image and open it to new once or twice and then it EOP OK. Does anyone else have this problem. It's really annoying! Thank you!

  Sarah

  Graphics card: NVIDIA GeForce GT 320 M

  OpenCL unavailable

  Driver version: 8.17.12.9610

  Driver date: 20120229000000.000000 - 000

  You are running a pilot Feb-2012 - old enough. The latest version for your video card was released on February 18, 2013.

  Download here: http://www.geforce.com/drivers/results/57100

  -ST

• problem with opening pdf file of the web browser

  I have Acrobat Pro ver 6 and Adobe Reader 9.1 on a computer.  When my user tries to open a pdf file from the web as it gets the following error message:

  "Adobe Acrobat/Reader that not running to view the PDF files in a WEb browser.  ADBE Acrobat/Reader version 8 or 9 is required.  Quit and try again. »

  What also happens is that Acrobat Pro 6 worm opens and nothing is there.

  I don't know why he received this message from Reader 9.1 is installed.

  One can shed some light on this for me.

  This user must have Acrobat and Reader on its system.  I understand that there are problems with having both.

  It has also set up so that any PDF opens using Reader 9.1.

  Thank you

  Configuration of your PC drive by default for embedded PDFs has become confused, because of multiple solutions of Adobe PDF documents installed on a PC.

  Solution 1:

  Go to start > run

  Type regedit, and then click OK.

  Navigate to the following key: HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe

  Make sure that the correct default data value is set to the path where are installed the Adobe Reader or Acrobat.

  The default installation values are:

  "C:\Program 9.0\Reader\AcroRd32.exe Adobe.

  or

  "C:\Program Files\adobe\acrobat 6.0\acrobat\Acrobat.exe" (not sure of this path.  Make sure that on your PC)

  If Adobe Reader or Adobe Acrobat is installed.

  Solution 2:

  Configure the browser to use Acrobat or Adobe Reader as a helper application.

  If you use Firefox to browse the web, you can change this setting in Firefox by clicking on:

  Tools > Options

  Click on the "Applications" tab

  The first item in the list should be "Adobe Acrobat Document".  In the Action list, click the drop-down arrow and select the application you want to read a PDF file in the web browser.  Click OK and you should be done.

  If you use Internet Explorer to view a PDF file, try the steps below.

  After you configure Acrobat or Adobe Reader as a helper application, the browser starts the helper application in a separate window and displays PDF files within this window. Acrobat and Adobe Reader both include a preference that allows you to specify the Acrobat or Adobe Reader as a helper application.

  To configure Acrobat or Adobe Reader as a helper application:
  Start Acrobat or Adobe Reader.
  Choose Edition > Preferences.
  Select Internet on the left.
  Deselect Display PDF in browser using [Acrobat application], and then click OK.
  Quit Acrobat or Adobe Reader.
  The next time you select a link to a PDF file in the browser, a dialog box asking what you want to do with the file. If you select open, the browser opens the PDF file in Acrobat or Adobe Reader (request for assistance); If you select save it on the disk, the browser saves the PDF file on your hard drive.

• HxD for Mac - problems with opening .dmg file

  I tried to open the downloaded "HxD for Mac application" but its .dmg (hxd4osx - 1.1 b 1) file will not open, not even after the converted (in reason to get error message "Strives image must be converted"). I have an iMac, OS 10.9.5. Can anyone help?

  Old look, you don't have to bother with it, there is a similar application that is free and open source

  http://ridiculousfish.com/HexFiend/

  with source posted on GitHub.