Problem to open ports in Cisco RV016

Similar Questions

• Problem with opening port (pat)

  Hello

  I am trying to open port 80 (www) on my pix and send all queries to my internal web server (192.168.0.150)

  I'm currently running Pix V 5.1 (5) on a classic old pix (stable)

  I'm not having much luck opening the port.

  I have 200.220.230.136/29 assigned to me

  Here's my ip address

  Router LAN: 200.220.230.137

  WAN Firewall: 200.220.230.138

  NAT firewall: 200.220.230.139

  LAN Firewall: 192.168.0.252

  I think the problem I have is with the static command.

  If someone could please take a look at my config and give me any advice on where I might be wrong, it would be a great help

  Thank you

  Clint

  PIX Version 5.1 (5)

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  access-list 101 permit ip 192.168.0.0 255.255.255.0 any

  access-list 101 permit tcp any host 192.168.0.150 eq www

  access-list 100 permit tcp any host 192.168.0.150 eq www

  access-list 100 permit icmp any any echo response

  access-list 100 permit icmp any one time exceed

  access-list 100 permit everything all unreachable icmp

  interface ethernet0 car

  Auto interface ethernet1

  Outside 1500 MTU

  Within 1500 MTU

  IP outdoor 200.220.230.138 255.255.255.248

  IP address inside 192.168.0.252 255.255.255.0

  ARP timeout 14400

  Global 1 200.220.230.139 (outside)

  NAT (inside) 1 192.168.0.0 255.255.255.0 0 0

  public static 200.220.230.142 (Interior, exterior) 192.168.0.150 netmask 255.255.255.255 0 0

  Access-group 100 in external interface

  Access-group 101 in the interface inside

  Route outside 0.0.0.0 0.0.0.0 200.220.230.137 1

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  I think your 100 access list should look like this.

  access-list 100 permit tcp any host 200.220.230.142 eq www

• Cisco RV016 not so Intelligent Balancer

  Hi all

  We have a problem with our routers of Cisco RV016 (we have 12 of them).

  Somehow the routers keep switching randomly between internet connections. (2-3 connections per router)

  We want to completely disable the load balancing and just use the internet connection from 2nd to 3rd as a failover (when the 1st connection is down)

  Load balancing breaks the session clients because the Middle session IP switch.

  Does anyone have a solution to this problem?

  We cannot deploy them like this and our distributor does not resume the boxes unopened with routers.

  We use:

  Firmware version: v4.2.2.08 (April 26, 2013 19:12:26)

  Kind regards

  Hi Wouter,

  We had the same problem. What I have done, is to create a rule in [System Management] - [Dual WAN] - [WAN 1--> configuration].

  The following rules are in my system:

  All traffic [TCP & UDP/1 ~ 65535]-> 192.168.1.1 ~ 192.168.1.254(0.0.0.0~0.0.0.0) [active] WAN1

  All traffic [TCP & UDP/1 ~ 65535]-> 192.168.1.1 ~ 192.168.1.254(0.0.0.0~0.0.0.0) [active] WAN2

  The rest of the settings:

  Enable Network Service detection: Yes

  Number of retries: 5

  Retry timeout: 30 seconds

  Case of failure: keep the system log and remove the connection

  Only [remote-host] checked with value 8.8.8.8

  Especially the setting with the remote host, the value 8.8.8.8 is important.

  Of course, it is possible to adjust it to the IP address of the modem, but this only works if the complete modem is turned off. For failover when the internet connection is down, assigning 8.8.8.8 works.

  Hope this helps you.

• port forwarding on Cisco RV016

  Hello

  Anyone know how to open a specific port on RV016?. I try different ways, but I get no polarity.

  I have to open ports for security cameras, and then I can see from outside my local network.

  If possible, it can either of you, show me how to do it please.

  Best regards

  Perez de Paris

  Hello

  If your access to the security camera in LAN with port 80 (by default)).

  You must configure the UPnp configuration under the menu setup:

  Add new service with the name "CAM1" with port80 internal and external port 81

  and configure the UPnp allowing to see page no.: 48 in link below.

  http://www.Cisco.com/c/dam/en/us/TD/docs/routers/CSBR/rv0xx/administrati...

• How to open ports on Windows Firewall?

  I'm not particularly computer savvy, but I like to play multiplayer games on MSN Gamezone (Backgammon) lately I couldn't play and get this message when I connect

  	Try to restart your game.
  Please close this window and restart your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your settingsby viewing Firewall Open Ports FAQ. I don't speak computer and everything I want a simple explanation on how to fix this so that I can play my game. Thanks for your help!

  Hello

  This can be useful:

  See Praveen solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/firewall-is-blocking-MSN-Games/83224a11-0681-4bd7-8245-5d654ab651fe

  Games for Windows - LIVE: Description of the Firewall Ports you need to open to connect to LIVE

  http://support.Microsoft.com/kb/937424

• open ports 80 and 443, is my PC security?

  Port number	Description	Keyword
  80/TCP	World Wide Web HTTP	http
  443/TCP	http over TLS/SSL protocol	HTTPS

  After trying firewall, I find 2 numbers of open ports, is my PC securitied?

  Thanks in advance for your suggestions

  Yes, like the said keyword, port 80 is http, for to go you, so if it wasn't open, you wouldn't be able to browse the web Web sites. Look at the URL of this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/open-80-and-443-ports-is-my-PC-securited/a1b2c95c-f8e3-4151-864f-4fffeb2b7c0c?page=1&TM=1316136754158#footer

  Notice the http at the beginning?

  And port 443 is the same as 80, but it is a secure version, for all sites where security is a problem, for example when connected to hotmail, Bank, paypal or many other sites where you sign in.

• opening ports 2077 and 2078 to use web disk

  Hello, I can't see my web files with webdisk and I would like to know how to manually open ports 2077 and 2078. I already read an article on the Microsoft Web site, but form a certain point the indication does not match what I see on my screen. Thank you

  Which firewall do you use?  If the built-in Windows Firewall, open the Security Center in Control Panel and select the Windows Firewall applet.  Select the Exceptions tab, and then click Add Port.  Specify your port.  Use the button change the scope to restrict the port to the correct network or IP addresses is not wide open to the Internet (unless that's what you need). Brian Tillman [MVP-Outlook]
  ------------------------------
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• WRTG54G does not open ports

  Hello

  I have a problem recently.

  I used to host the games and an FTP server, and for that, I need to open some ports. He used to work all the time, but recently people couldn't connect to me more.

  I tested a few things online (open port scanners) and it seems that all my ports are closed.

  It used to work fine, but now is no more. I wouldn't change anything. What could be the problem here?

  Thanks, Neil

  I set my router on factory settings, reset the modem, DHCP renewal and all, finally it works!

  Thanks for the effort though

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• iOS 10.0.2 problem cannot open notes

  iOS 10.0.2 problem cannot open notes

  Since the update to ios 10.0.2 week last on my 5s just notes iPhone keep crashing. Anyone got a fix?

• AirPort Extreme open ports

  I used my iPhone to scan my home network using AirPort Extreme. I found 3 open ports on the extreme of the airport as follows:

  53 dns

  5009 apple airport admin wap

  10000 web webmin Linux admin tool based on

  Here is the screenshot

  

  I'm a super newbie to the airport. I would like to ask what is the 10000 port for? Why is there a Linux administration tool in an apple product?

  This is an excellent reference: https://support.apple.com/en-us/HT202944

  And more generic: https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers

  Note that ports above 1023 including 10000 could be anything and should generally not be worried.  It seems that 10000 is for example used for VoIP call.  So, being identified as Webmin is probably a false decision simply because who uses also 10000.

• Open ports on the AirPort Extreme 7.7.7

  I wonder how to open ports on the AirPort Extreme version 7.7.7.

  I spoke to Microsoft some ports I need to open for my Xbox and have the list of ports. I'm looking for how to do this. I have no experience with this sort of thing and I know that I can do in the AirPort Utility application, but I don't want to mess with all that I wouldn't have to. I tried to search online for this guides and I can't find anything that is recent. When I watch videos, everything is a little different and the interface is not quite the same more so any help is appreciated.

  I got this Tip for the user of an airport for this situation. Check it out and see if this helps you.

• Hi, my iphone 5 have some problem in its port .i want to replace it, can someone tell me how much I spent on this iphone?

  Hi, my iphone 5 have some problem in its port .i want to replace it, can someone tell me how much I spent on this iphone?

  Apple will usually provide a replacement

  You can check the cost here

• Compaq 15 laptop: I have problem to open windows 8 I do not remember the email from Microsoft outlook

  I have problem to open windows 8... I don't remember the email from Outlook... and I can't open the windows... the computer is Compaq 15 Notebook pc

  Hello @djgenti,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the question of password and he wanted to help!

  First of all, please consult the following document and let me know how it goes:

  HP computers - what to do when you forgot your connection password (Windows 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Question of networking: how to open port 8080?

  original title: network
  How to open port 8080?

  Hi LaraineChic,
  When you post a question, please include as much detail as possible.
  In this case, the operating system, the program used and the reasons would be huge help.
  This is an XP Microsoft KB on how to manually open ports.
  Calculation of the happy,
  B Eddie