Problem Touchpad Y570.

Similar Questions

• Satellite L50D-B-131 - several problems: touchpad, keyboard, internet

  Hi all!

  I've had my laptop for a while, but I never really had time to take care of the problems accompanying.

  Since I'm away, all the way in July, my touchpad doesn't work properly.
  As simple as that. It would work for a few seconds at the start, then it would just get stuck in scroll mode.

  My keyboard sometimes just stops working after a long while of using my laptop.

  When my laptop turns off after that I'm away from keyboard, then back on, the screen is black.
  Whenever I need to shut it down, and yet it in standby mode, and then reopen it so that screen to display everything.

  I have no idea why, also, but all three of my Explorers are very bugs. Chrome, Mozilla and IE.
  My videos just stop at random, to recharge and refresh with much less good quality.
  They like to close no reason too. When I'm browsing a simple page like Facebook, I have framerate problems, I can't scroll correctly because when I do, I find myself skipping sections because it is this stroller.

  Can anyone help? Thank you.

  Guess what?
  It is hard to believe that all these questions would be related to a general problem.

  For example internet explore described making sounds to me like a slow internet connection. Internet browsers are probably not able to load all the video data (probably in HD resolution) and, therefore, the video starts to play using lower resolution.

  The touchpad supports some additional features that can be configured in the settings of the MOMENTUM. (Control Panel-> mouse-> momentum settings on the last tab)
  If you n t use all the features of the touchpad, I recommend you to disable the options in the configuration menu momentum.

  Some sound issues too as the system should be locked for a short time.
  Why? I m not quite made sure that, but maybe some application, run in the background and lock the system for awhile.

  I m wondering if you already tried to retrieve the laptop back to factory settings.
  If not; Give it a try. Your comments would be appreciated.

• Problem Touchpad on Satellite P750 - 02L

  Hi guys, so I have a P750 satellite, according to me, it's a year old just on sound now and since it last a few weeks the touchpad began to play up.

  Whenever I turn on the laptop for the first 5-10 minutes the Mouse touchpad refuses to do what his.
  Half left of the key is completely insensitive and the right side you move your finger to point the mouse and it just goes wherever he likes, he's not going no where I try so that it points.

  Also during his this operation, it is quite often the resizing thing, how you drag it with 2 fingers to zoom. It is a very frustrating problem. I have not fiddled with the settings, I did a reboot of the system back to factory settings, still no luck.

  On a side note, my media keys at the top of the keyboard is no longer light up or make a beep when I press on them.

  This isn't a big deal, but I liked it when they were still on and beeps when you press on, any help on this issue would be appreciated but not necessary. I just my mouse working again :(

  so to sum up the Mouse touchpad refuses to answer correctly for the first 5 to 10 minutes of power upward until it works perfectly normal again.

  Any help would be appreciated.

  Thank you for taking the time to read this rather long question, your help and your feedback will be appreciated.

  > I did a reboot of the system back to factory settings, still no luck.

  What does that mean? Did you use the recovery option? Otherwise, try to get the laptop back to factory settings
  Not quite sure if the touchpad problem is software related, but could be solved by the system recovery

• Acer Aspire problem Touchpad ES1-711-C231

  Hi all I recently reinstalled windows 8.1 in my laptop Acer Aspire ES1-711-C231, the touchpad worked fine before, but since the re - install is no more recognized/detected by windows 8.1. I download the device on the support page (Elantech touchpad) driver but still no joy. Help, please. What about Paul

  Hi all, problem solved had not correctly installed the driver intel I/O.

  Paul

• Update problems - touchpad and keyboard do not work!

  After you install an update, the touch pad and the keyboard on my laptop won't work.  I was able to use a wireless mouse, after a few failed attempts.  Any suggestions?

  Hi jennkjohns,

  1. what happens when you connect the keyboard to the computer?

  2. what update has been installed on the computer?

  Method 1

  First of all, I would say you visit your laptop manufacturer's website to download and install the updated driver for the touchpad and check if it works.

  Check in the Device Manager, the State of the keyboard.

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Method 2

  Checking update was installed before that the problem occurred.

  (a) updates installed open by clicking the Start button, click Control Panel, click programs

  (b) and then, under programs and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the link below to learn more about how to clean boot in Windows XP.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion: synaptics touchpad problems.

  I currently have problems touchpad and mouse.

  I used my wireless mouse once and my trachpad has stopped working compltetely.

  I have seen that it is a common problem but Ive tried everything and nothing works. a hard reset worked once to get my mouse works again without the wireless mouse but when I need to click top of cushion does nothing.

  I tried another hard reset, but the mouse pad still does not work. the mouse only appears when I plug the wireless mouse.

  When I go in the settings is not synaptics, so I downloaded synaptics for my laptop and he said 'impossible to find specific program BONES.' so I uninstalled the old version, downloaded the version for my computer laptop but still said the same thing, even if it was the version for my laptop.

  Any idea?

  @evanb1997

  Install this first.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  RESET.

  Then install this.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72875.exe

  RESET

  REO

• Satellite C855-2GX - touchpad is lagging while doing somehting that need RAM

  Hey all :)

  I have a toshiba Satellite C855-2gx
  My problems touchpad lag so much if I install a software or I'm doing something which need to ram (games, defragmentation)

  There is no solution for my problem please :'(

  and sometimes the shift of the pc (keyboard and mouse do not work)

  Sometimes, I noticed the same on machines with low performance. It happens when the drive is extremely busy and portable needs performance for some intensive like defragmentation operations or antivirus scan.

  What you can do about it? In General, you can improve Ram to increase performance of s for laptop and also you can optimize the preinstalled operating system. With optimize I mean you can disable all unnecessary applications and the boot process for your laptop will take care with less background process.
  Also disable the Windows automatic update installation. Use the option check for updates but let me choose...

  I think that you need to upgrade RAM. If you need advice or help with this let us know.

• NB200 - 10G Touchpad behaves a bit like locking click is on, but is NOT

  Brand new NB200 - 10G. Excellent except for problems touchpad netbook. When you drag a window I expect action slide stop when I lift my finger on the touchpad, but if I have too quickly and then reapply the window continues to slide. If I wait a little longer before reconnecting my finger everything is OK and the window remains where it is. It's like the ClickLock is enabled for a very short time after I lift my finger of the touchpad. But the ClickLock is definitely off.

  I installed the latest driver for ALPS touchpad, which seems to have made more responsive touchpad, fewer delays and "stuttering" others reported but no effect on the above problem.

  I called Toshiba UK computer laptop tech support and they advised me there were NO problems reported with keys to touch on NB200 series netbooks, but I found many reports of problems on the EU Toshiba forums and more us Toshiba forums, strange...

  Any ideas?

  THX, Ken

  All you can do is to reinstall the touchpad driver or reinstall OS. Update BIOS OK can be tested too.
  I mean what else can be done.

  When you connect external mouse is everything is OK?

• Satellite A300-29N - Touchpad lagging if the network cable is connected

  I have a very strange problem with my Satellite A300-29N. When I connect the LAN cable on my laptop touchpad gal and penetrating becomes very high.

  Here is a picture of the demand shows the problem touchpad
  BTW, the problem is on windows and linux, so I don't know if it's a hardware problem or what?
  http://img23.imageshack.us/img23/3577/touchpadb.jpg

  Hello

  > the problem is on windows and linux, so I don't know if it's a hardware problem or what?
  What do you think? I think the case is clear if the error occurs on (Windows and Linux). That's why it of necessary to exchange the motherboard or the touchpad.

  Your laptop must be checked to an authorized service provider. Technicians can determine what is the reason and order all spare parts, they are necessary. Moreover, the Toshiba site, you can search the nearest ASP.

• Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

  Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

  SOLUTION

  So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

  Installation mode: UEFI (only) - LEGACY would create problems touchpad.

  After the installation of windows just follow the hierarchy of driver installation

  1 Intel NB_Chipset_M Baytrail-M

  2 Intel i/o driver

  then the rest of the shit.

  Note: after doing all this make sure your touchpad is active > Fn + F7

  Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

  Enjoy everyone

  [private under the leadership of life]

• T410 - reader of fingerprints and TouchPad failure after closing lid

  Hello world
  I have a ThinkPad T410 Intel Core i7 M620 2.67 GHz, 250 GB HDD, 4 GB of RAM, NVIDIA 3100, Windows 7

  There are two problems with it:
  Number 1: After waking up from sleep mode the fingerprint reader does not work. Type of manual password is required.
  , 2nd edition: At a random time the TouchPad would stop working.

  Question No. 1 is extremely annoying. That happen every time, but often enough to be very bored.
  There are different scenarios that I can describe:
  Scenario 1:     Closing the lid makes the laptop to go to sleep. Opening the lid makes the laptop turn on the screen, but there is a login prompt. At this point the reader to Finerprint is not active more and manual entry of the password is required.

  Scenario 2:     Closing the lid makes the laptop to go to sleep. Opening the cover does nothing. The Green LED on the fingerprint reader is on. Slide the fingerprint reader turns on the laptop. Login screen is displayed and manual password entry is required. Fingerprint reader is not available at this stage.
  Scenario 3: by pressing function + sleep makes the laptop to go to sleep. The Green LED on the fingerprint reader is on. Slide the fingerprint reader turns on the laptop. Login screen is displayed and manual password entry is required. Fingerprint reader is not available at this stage.

  After each scenario I would like to connect manually, and the Fingerprint reader does not work with Password Vault, giving a message that it is not present in the system. After waiting for a while (maybe 15 minutes), the fingerprint reader starts working again.

  At the same time, I had a problem with the TouchPad will not work at a random time.
  He would just stop working from time to time and not work until a reboot of the system.

  I used my super cool NextDay on site warranty (I'm so glad I paid the amount extra - the service is great) to have a guy to come and difficulty a faulty speaker. At the same time, he had inspected the problem of fingerprints. He said that the fingerprint reader and Touchpad are connected to the motherboard by a cable and that it is perhaps the origin of the problem. It came the next day to replace the Touchpad and fingerprints of the reader of the cover of laptop part (all the plastic around the keyboard that you put your wrists on). However, it did not replace the cable that connects the two devices to the motherboard (he said that those who are almost never defective)

  After that I have not once experienced the freezing problem Touchpad. (so far... for 4 days now)
  Fingerprint reader problem has not changed at all. It happens with the same frequency as before the repair.

  I got my system to factory state using the recovery media made the 1st day following purchase. It doesn't change anything.

  If anyone else has experienced this problem and has a solution, please let me know.
  Referring to another forum or topic is also welcome. If I find a solution I'll post it as well.

  Thank you

  AFTER several months of pain, I found a solution to this problem:

  I got rid of this problem by reformatting everything using the original recovery disks.

  I tried this action before, but this time it worked.

  A friend told me that his laptop computer from a different company had a similar problem and found after hours of searching the sequence in which the drivers have been installed on its system had an effect ON the system.

  I'm not saying that this is the case here, but maybe something ' just clicked on '...

  No problem with my FingerprintReader more. I did this action 2-3 weeks ago and I got not a single occurrence of the FingerprintReader error.

  Good luck to all.

• Behavior erratic mouse/Touchpad on Inspiron 15 5447

  I had my laptop for a little over 4 months. I mainly use a wireless mouse with him... and every so often the mouse will have a mind of your own. I can be typing or even try to use the mouse and it will start to jump around on the screen itself... by selecting things... even of switching/Mobile windows as if buttons are pressed as well. At first I thought that maybe it was interference with the touchpad... so I tried both disable touchpad when external mouse is connected... and disable the touchpad altogether and the problem persists. So I thought that maybe the mouse is the problem, so at some point when he wents nuts on me, I turned it off and opted for the touchpad... but the erratic behavior continues. The only thing I can do about it is to restart... and then things are usually fine for several days before the question starts again. Any thoughts on what the problem maybe, or troubleshooting tips?

  
  It worked - DELL has a terrible touchpad - there is a hardware ONLY problem affecting the series 3000, 4000, 5000 and 7000.  I bought a protective screen of the dollar for a dollar store, it worked where all software solutions had failed.

  • Posted byalpha-amandine on July 28, 2014 13:41  Answers verified Verified by pelosap

    Hello world!

    Like you I had the same problems touchpad. At first, I thought it was ESD and troubleshoot-made for a few days. Finally, I concluded that he had nothing to do with the EDD and passed questions possible pilot. I installed every driver package I could find, modified, off driver signature in order to install OEM drivers, used Windows 7, 8, 8.1, Ubuntu etc... but in vain.

    Early on, some kind of physical problem seems to be the most logical. The question was just what! I couldn't believe that synaptics could do such an aweful touchpad which was incapable of actually at work. I did support arguing that the question must be caused by something small. During my last clean install of Windows 8.1 I noticed that the default windows caused the touchpad driver is EXTREMELY sensitive. You will notice that once you install the latest driver from Dell the cursor movement calms down considerably. The touchpad is still extremely sensitive, the driver is just take the raw input all that and generalizing it in a cursor, easier to manage. Conclusion, the touchpad is too sensitive.

    I compared this premise with my previous experiences and found much support each other. My touchpad would typically be panic after a lot of 2-finger scroll or a large number of movements of gesture.  Indeed, it would stop work entirely if I blew warm breath on her. Conclusion, I need to desensitize the touchpad on and protect... but how!

  In my first attempt, I simply took the touchpad transparent and entirely covered with packing tape. Don't expect anything I ran my finger on it and revealed that the movement of the cursor is estimated much more controllable. I used it for 30 minutes like this with only a few minor problems. (My touchpad STILL freaks out in the first 15 minutes, so for me it was a big deal!) I asked a little more layers of Ribbon downwards and the feature kept getting better and better. Since I was best performance with several layers of tape and because the transparent packing tape is not look glued to your laptop I wanted to find a better solution. I needed a plastic resistant thick that I would stick to the surface of the touchpad and has no need of me to use many of the layers. Conclusion, use plastifieuses 3 m plastic.

  On this second attempt, I disassembled the laptop and removed the touchpad of the palm rest area. I used a tampon Magic Eraser with a little water and very little SOAP to clean the surface of the touchpad. After that it was clean and dry I cut an oversized square piece of plastic lamination and placed the touchpad upside on the sticky side of the plastic. I then took a razor and carefully trimmed the excess by tracing around the edge of the touchpad. The result was a piece perfectly sized plastic on the top of the touchpad. I reinstalled the touchpad in the palmrest and reassembled the computer. (Please note that there is some tape of ground wire to the back of the tablet that should be reapplied during installation.)

  I use it like this for 3 days now with ZERO problems! I hope that Dell takes knowledge from this post and comes up with a real solution. The black surface of the touchpad is itself just plastic glued on the circuit of keys using an adhesive. It seems that the simple solution would be for them to replace it with a more robust piece more thick. One thing I noticed is that the 3 m plastic is tougher than the original surface of the touchpad which makes it difficult to slide your finger over it. When I started my finger continued to jump on the touchpad which caused the cursor to jump around, however after a few hours he smoothed out nicely. You can have better luck using a different plastic as a screen protector of mobile phone since it was designed to have the fingers touch.

  in any case, I really hope that this helped you guys. I was just as grumpy as you on this subject and I still think that Dell OFFICIALLY must do something about this problem! (DELL TAKE NOTE!) In the meantime, I hope this allows you to you guys and running and able to enjoy your laptop once more! Good luck!

  

• M4800 owners: problems of Linux. Looking for drivers.

  My Config:
  Intel Core i7-4900MQ processor (Quad Core, 8 M Cache, 2.8 GHz, w/HD Graphics 4600)
  DDR3L 600 MHz 16GB (2x8GB)
  39.6 cm (15.6 ") UltraSharp QHD + (3200 x 1800) wide angle of view anti-Glare LED backlit guaranteed Premium wallpapers
  NVIDIA Quadro K2100M w / 2GB GDDR5
  2.5-inch 500 GB Solid State hybrid Drive (Will be replacing this with the Samsung 840 Pro 256 GB SSD I already own)
  2 x Blu - Ray burners tray loading
  9-cell (97Wh) Lithium ion with ExpressCharge battery
  Dell Wireless1550 802.11ac 2 X 2 + Bluetooth 4.0
  English internal backlit dual pointing keyboard

  Card reader chip Base for Panel QHD + and Windows 8
  Swipe Fingerprint Reader and smart card reader (Contact and contactless) palmrest, Dell Precision M4800
  Telescope cam/mic QHD +.
  Back cover QHD + Panel when
  Power supply 180W
  Red Hat Enterprise Linux 6.4 English year NHN
  3 years: 7 x 24 proSupport Technical Support & Assistance, NBD, Global

  Linux problems:

  Removed RHEL 6.4 and got 19 Fedora (due to normal use) installation with dual boot Windows 7.

  Have faced some problems touchpad. It sometimes does not recognize touch! Cant' find the dedicated drivers.

  Installed A Nvidia video drivers. Screen looks good but failed to set a resolution (1920 x 1080) below! Full screen! for example I see about 25 ~ 30% a window fully maximized rest overflows off the screen. If someone was able to put in place correctly, please share your xorg.conf. According to me, that it is a problem of pan. Am I wrong?

  And have not been able to find the network drivers for DELL 1550.
  ICP ID: BCM4352

  b43 and b43legacy said that it is still not supported.

  Broadcom BCM94352HMB with chip 1: Broadcom BCM4352 said there is a driver available here Broadcom: driver Linux STA although the readme indicates support 4352 (not BCM4352) has been added, trying to build a loadable kernel provides a module error 2: no rule for target of 4352. Everything indicates that the chipset of DELL 1550 is not yet supported which contradicts the readme file!

  Did someone managed to find the driver for Dell Wireless 1550 linux network?

  TIA

  You can find a driver in rpmfusion-nonfree-updates

  akmod - wl.x86_64 6.30.223.141 - 1.fc19.2 @rpmfusion-nonfree-updates
  Broadcom - wl.noarch 6.30.223.141 - 1.fc19 @rpmfusion-nonfree-updates

  This driver seems to work but I have problems: Wireless link survives for more than an hour and several times during a few seconds. I posted a bug to bugzilla.rpmfusion report, but at the moment I don't know if the problem comes from the kernel, NetworkManager or the driver.

  Research at Netlink messages with

  IW - debug event t

  I noticed a few frames with a = 44 nlmsg_len and a length of payload of 28 bytes which produces the message "disconnected (by AP)" and after that all the reconnection attempts fail

  So right now my wireless link is still almost unusable.

  No information on this issue (successful or unsuccessful) will be welcome

• The press does not not - Satellite Pro A300

  I just turned on my laptop after a day of not to use and the touch pad does not work properly.

  Every time I try to move the mouse goes in all directions and starts to clicking on things when im not and highlighting and dragging things all the time when trying to move the mouse somewhere.

  Its as if he has a clean mind.

  Anyone know what is the problem with it please or do I have to just get a new one?

  Hello

  What laptop you have and what OS is installed?
  Have you tried to update or reinstall the driver of the touchpad?
  If it isn't-> do this!

  On the other hand, a hardware problem (touchpad, keyboard) might be possible.
  One of my friends had a similar problem. The touchpad does not work and the cursor jumped all the time left and right
  It was not possible to mark anything on the desktop of the technician said that there is a malfunction of the keyboard and it replaces

  It's a key.

• When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move...

  When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are

  (1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...

  what I've done

  I did a key recovery... even I am facing problem... Please tell me the steps to fix

  Original title: DESKTOP PROBLEM

  Hello

  Check with Lenovo support, their drivers and documentation online and ask in their forums
  on known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.

  =============================

  More troubleshooting if necessary:

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">