Problem troubleshooting Windows

Similar Questions

• Problem troubleshooting with updates

  is there an easy way to solve this problem?

  What type of problem are you having? Please provide details.

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• have a problem with windows mail using vista, it won't send mail it's just continues to ask the user to verifery a password

  windows Vista mail problem

  have problems with windows mail with vista, it will not send an email he just keeps asking to verifery user, a password have checked all the settings a knowledge they are correct... can connect to the server an everything is ok... get this error msg... Account: 'att.net', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] invalid username or password. (#YSH001)', port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92... on this for 2 days may not understand... Please help?

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  It will be useful.

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• problems of Windows vista appearance - is no longer able to change the theme

  original title: problems of windows vista appearance

  When I logged on my computer today, the theme was changed on my windows vista Home premium.  I tried to change my appearance options for vista, but all my options of vista are gone, I can only chose classic and standard.  Can someone help me get my system works like the original please?

  I have looked through other forums and have tried some of the suggestions I found without a bit of luck.

  Hi MikeCook30,

  1. did you of recent changes on the system?

  Method 1:

  You can try to run the aero Fixit and check out them.

  Troubleshoot Windows Aero

  Method 2:

  Alternatively, you can try to restart the service of themes and check for the issue:

  a. Click Start, type services in start search and press ENTER...

  b. in the list of services, click themes and then click Properties.

  c. under the general tab, click Automatic in the startup type list.

  d. under the general tab, click Start under the service status and then click apply and then click ok.

  Hope this information is useful.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• problem with windows mail (using Vista) after automatic updates installed

  After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

  Hello

  Try the following methods:

  Method 1:

  Try to download and reinstall Windows Mail using the link:

  http://support.Microsoft.com/kb/941090

  In the link above, go to download and install the update.

  Method 2:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Reference:

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• I have problem whith window activation I need adjustable

  pls me adjustable

  Hello

  These should contribute to solve the problem.

  1. start - type in the search--> SLUI box. 4 EXE, and then press ENTER.
  2. Select the country
  3. Select the Activate by phone Option and wait for a representative help

  Assisted Support options
  http://support.Microsoft.com/select/?ln=en-us&target=assistance&x=14&y=14

  Product Activation Solution Center
  http://support.Microsoft.com/contactus/cu_sc_prodact_master#TAB0

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/kb/326851/en-us

  How to contact a Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929

  Getting Started with Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/help/getting-started

  Resolve activation problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  Activating Windows: Frequently asked questions
  questions http://Windows.Microsoft.com/en-US/Windows-Vista/Activating-Windows-Frequently-Asked-

  Get a new Windows product key
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-a-new-Windows-product-key

  Error message when you try to activate Windows Vista: "an error has occurred."
  http://support.Microsoft.com/kb/931276

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Troubleshooting Windows 7 0x8E5E0247 error

  I have problems with the resolution of the problems in Windows 7 64 bit.  Any time I try to use it to fix anything, I get the error message "an error has occurred when troubleshooting: a problem to start the troubleshooter."   I restarted in safe mode and the same error occurs.  It also still fails the same way that you try to run the program compatibility.   Error message:

  Identifier of the package: PCWDiagnostic
  Path: c:\windows\diagnostics\system\PCW
  Error code: 0x8E5E0247

  Any help would be appreciated.

  I was finally able to resolve this problem.  I found the answer on another forum and it solved the problem as well.

  The error was caused by Intel Rapid Storage Technology technology program that comes with my Toshiba laptop.

  I guess the old driver did not like the new 640 GB hard drive, I installed.  Maybe it was designed only for up to 500 GB (that's the size of my old hard drive which worked well).

  Technology Intel Rapid Storage Technology program was shown in the notifications of the taskbar with a yellow exclamation point.

  As soon as I put to update this driver at latest on the Intel site, Windows Update and everything worked.

  Hope this helps anyone else having the same problem.

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• The following text has been a constant problem with WINDOWS UPDATE

  Problems found

  Details of detection

  5 The search for updates failed Detected

  Windows Update has encountered an error, search for updates online.

  Details of connectivity Events about the problems of connectivity to the Windows Update servers. Level: Warning Journal: Microsoft-Windows-WindowsUpdateClient/Operational Date: 21/12/2015-15:38:01 Message: Lost connectivity Windows Update. Scan details Windows Update has encountered an error when searching for updates. Error code: -2147012721

  Details of detection

  Network Diagnostics log

  Name of the file: CF447702-14FA-4B21-A189-F9E798519E3D. Diagnose.Admin.0.etl

  Other newspapers and Network Configuration

  Name of the file: NetworkConfiguration.cab

  Collection information
  Computer name:	PAULETTE-LT
  Version of Windows:	6.1
  Architecture:	AMD64
  Time:	Tuesday, January 5, 2016 20:26:20

  In this case, it is recommended first to check if your Internet connection is working properly. To do this, open a browser (such as Internet Explorer, Google Chrome, Mozilla Firefox, etc.) and type in any website (such as www.google.com, www.yahoo.com, etc.) in the address bar. Press the Enter key on your keyboard to start the Web page. If the Web page does not load, then it may be a problem with your Internet connection. We recommend that you follow the troubleshooting options mentioned on the links below to solve this:
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  If the Web page loads successfully, then your Internet connection works well. In this case, run the tool in troubleshooting Windows Update from the link below and see if it works:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Hope this will help you.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem on Windows 7 computer network connectivity

  The desktop of Windows 7 ether net connected, I had selective network problems. I was unable to access the Web sites, but had no problem to update software and connections to the game servers. I ran antivirus and optimizer software to solve the problem, but I think they may have removed some crucial programs for networking.  Now, I am unable to access the Internet related services all via ether net.

  I tried to reinstall the driver for network card to the motherboard. Among network cards, the teredo tunneling adapter displays an error titled code 10. I tried the REGEDIT fix and reinstall the driver.  None of these solutions so far have worked.

  I'm not sure whether the mistake of teredo is the cause, but it seems like a common problem. Anyone know how I might be able to solve this problem?

  Original title: network connectivity problem

  Hello

  Thanks for the reply.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?

  2. that you get an error message when you connect to the Internet? If Yes, what is the full error message?

  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See the article for more information.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problem with Windows 7 Canon Pixma MX870.

  Original title: my PC woes

  I had to re - install my Canon Pixma MX870 after a complete reinstallation of a computer. I've never had any problems. I use Windows 7 Ultimate. Everything went according to plan. Successful installation, drivers - updated, then went to print and nothing - message in the printing of the error box.

  I can't restore anything to an earlier time, as I said it's a full system reinstall. Can anyone help

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MX870 - software and drivers<- select="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx870#DriversAndSoftware

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP