trying to recover from a bios flash

Similar Questions

• Need help to recover a bad BIOS flash on Satellite L300D-01

  I need your help to fix my laptop because the BIOS is not included in the guarantee.

  What happened:

  I was downloading all the drivers from the site Web of Toshiba to make a CD-ROM of drivers, in case I need it.
  I clicked the update of the BIOS when I drag and drop into a new folder and the BIOS start without asking and freezz about 50% I wait 30 min because I know THAT BIOS is critical, but after all this time I have no choice then to power off the computer.

  Now when I turn on the computer, I have no disk image trying to read and she.

  Now what I want to do is a CRISIS of recovery since this is the only option I have for now.

  What I need, is that the BIOS file not the stupid .exe, but a ROM or .bin I think and instruction to do on this particular model.

  Thanks for looking for my post and I hope that someone can help me here because repair $80 for a budget laptop is great.

  I doubt that you might be able to repair this laptop for yourself.
  The fact is that the ROM module has been flashed properly and I guess it must be flashed again using a traditional BIOS version.
  This version of BIOS is NOT available on the Toshiba page. Only a victory according to BIOS version.

  Therefore, you will need to contact the ASP in your country for a BIOS flashing module.

  Mate sorry but I don't see another solution to the problem you.

  Welcome them

• (Redirected) Reference Dell 1815n-photocopier/printer/fax(Error file format not supported trying to print from a USB flash drive stick)

  So I saved for different types of documents on a flashdrive (PDF, Word, Excel) and after having placed the flash stick drive in port on my Dell 1815n, an error pops up that States format not supported for files. I have formatted the USB stick, but cannot get anything to print. I tried 2 different flash drives to ensure that either has not been corrupted? Any help?

  Best of this post in the Forum of devices/printers, here:

  http://en.community.Dell.com/forums/3528.aspx

  Bev.

• Trying to recover from windows 8 for windows 7

  I was in windows 7, then I upgraded to windows 8 and now want to recover but I didn't recovory files, so I bought recovery CD the instructions say to put the drive to turn the computer off and then back under the crib of recovery appears and you follow the instructions. But he does nothing and continues to the normal windows startup screen 8.

  Well none of your guys technique really worked, but I thought about it, if anyone has this problem simply write to me

• Trying to recover from a corrupted registry.

  Follow the directions here: http://support.microsoft.com/kb/307545 and now I have a new problem. I did just like the directions say. I deleted the registry files existing and then copied the registry files to restore the system in the C:\Windows\System32\Config folder. I typed "exit" to exit the recovery console.

  At this point, the computer proceeded to reboot... exceeded the screen where Windows XP then care received it!

  lsass.exe system error

  An invalid parameter was passed to a function or service

  So I clicked ok... now he's trying to restart again and again, which gives me this message:

  lsass.exe system error

  When you try to update a password the return status indicates that the value provided as the current password is not correct.

  What now? Any help is appreciated, thanks

  Hello

  You can view these methods:

  Method 1:

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:
  1. click on start.
  2. in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
  3. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
  4. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors if there is.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  You can check the link below for more details - mentioned
  http://msdn.Microsoft.com/en-us/library/ms793989.aspx

  Method 2:

  You can perform the upgrade on site that may help you solve the problem...

  How to perform an upgrade on the spot (reinstallation) of Windows XP
  http://support.Microsoft.com/kb/978788
  

• Trying to recover from a disaster

  It is difficult to explain... the entire chain of disasters, largely due to bad practices. I'd appreciate a lot of help
  
  We (really, we had...) a server Oracle 10g 10.2.0.1 6 databases running on it. We did backups RMAN bands to each other using Symantec Netbackup. The script was like this:
  
  RUN {}
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  BACKUP
  BACKUP %
  FORMAT ' bk_u % u_s % s_p % p_t % you
  DATABASE;
  SQL 'alter system archive log current';
  OUTPUT CHANNEL ch00;
  # Backup all archive logs
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  BACKUP
  FILESPERSET 20
  FORMAT ' arch-s % s-p % p'
  REMOVE ALL ARCHIVELOG ENTRY;
  OUTPUT CHANNEL ch00;
  # Backup control files
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  BACKUP
  FORMAT "ctrl_u % u_s s_p p_t %t % %.
  CURRENT CONTROLFILE;
  OUTPUT CHANNEL ch00;
  }
  
  Last week the server crashed down, due to problems of phisycal on hard drives, and we could not get it to the top. Then restore the databases from scratch since the backup tapes that we have.
  We had the RMAN catalog on the same server database... so we lost too much and we can't use ir to restore.
  We cannot use the dbid because we don't know them and we cannot see them on the server.
  In order to obtain the control files of the backup, another way to restore of databases, we reviewed documentation and it says it takes to use the name of the control file. The control file name problem is the same in all databases, so RMAN always return the last database saved file.
  Perhaps the first thing to do is to restore the database with RMAN, but I don't ' know if it is possible in this situation.
  
  To will be appreciated. Thank you very much

  Hello
  Now, I understand your question. It seems that the format for the controlfile doesn't generate the same name.

  -rw - SYSTEM SYSTEM 7340032 jul 10 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 7340032 jul 10 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 7340032 jul 10 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 9175040 Jun 09 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 8650752 Jun 09 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 7340032 Jun 09 12 ctrl_us_pt:------.

  You can try to restore the controlfiles from backup items.
  as:

  RUN {}
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  RESTORE CONTROLFILE to ' / tmp/test_1.ctl ' to 'bk_uh9mh1p66_s553_p1_t756081862 ';
  OUTPUT CHANNEL ch00;
  }

  Only songs that contain the system01.dbf will have a backup controlfile so (if controlfile autobackup is off) so try several pieces.
  Here some results a test of a bunch of restoration by using the above script.

  If the piece has no controlfile:
  - - - -
  From restoration to 19 - AUG - 2011:15:51:40

  channel tc1: restoring controlfile
  output channel: tc1
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command to 2011-08-19 15:53:28
  ORA-19615: some files not found in the backup set
  ORA-19613: datafile 0 not found in the backup set

  - - - -
  If the room contains a controlfile:

  From restoration to 19 - AUG - 2011:15:55:03

  channel tc1: restoring controlfile
  channel tc1: full restoration
  Finished restoring to 19 - AUG - 2011:15:55:18
  - - - -

  Kind regards
  Tycho

  Edited by: tychos August 19, 2011 15:57

• Problem trying to recover from a Rescue & Recovery DVD.

  
  
  

• T400 died after BIOS flash

  Windows (7 x 64), I tried to update the BIOS.

  He treated and after that it restarted to close unexpectedly.

  Now, after turning on the laptop it beeps twice and that's it.

  Nothing appears on the screen.

  Tried to download the bootable BIOS flash CD, but unable to start than at the Lair of the BIOS.

  I guarantee, but I think I have to send the machine in another country (im in Hungary) for weeks, I ask so as there may be a solution for this... but I 'google' for hours on the subject.

  Thanks in advance.

  Hi cbodis,

  I'm sorry to hear the BIOS update failed, but I think that your only option in this case is the service. I'm sure that there are no other choice to fix it on your own if the BIOS is damaged after a failed BIOS updated.

  Are you sure you want to send the computer to another country? I'm sure that the computer can be fixed in Hungary. They will probably replace just the motherboard. You can call the following number and ask about the warranty/service: 36-1-382-5500

  As for the future, I recommend that you update the BIOS by downloading the ISO image, burn the image and boot from the CD to update instead of Windows Update. I know this will not solve the problem, but I've heard more issued after only an update of Windows over the use of the ISO so maybe a good idea for the future.

  -gan

• How to enable Hyper-v from the BIOS in book pro 430 G1

  In fact, hyper-v has a tick perfect on windows 8 but when I start windows mobile emulator it gives error hyper v and then I tried to go from the bios, there is no option for hyper v then how should I allow it?

  Can you put a picture of the BIOS screen you see?

  You should be able to activate the virtualization of in the BIOS. Do you use the BIOS as an administrator?

  I suggest that you update your BIOS to the current version. This should return the ability to enable virtualization.

• Trying to fix Chkdsk from freezing to step 5 of 5 during a scan and trying to recover bad sectors and fixing file system errors

  On this afternoon, I ran chkdsk to check and recover bad sectors and solve the system files and then frozen at 43% on step 5 of 5. I left it on through the night and I went to school and came back, she was still at 43%. Then manually shut my computer and since I tried to solve the problem. It was the second time I ran chkdsk on this pc having windows 7 generally run chkdsk every month or so to make sure that everything works well. After that my problem is that I tried so many things that I ran spinrite, I reinstalled windows, I tried to run chkdsk on safe mode, I tried sfc/scannow, and chkdsk/p and all these things has not fixed the problem. CHKDSK/p was the only thing that does not even tried to fix anything because it says invalid parameter. Also when I reinstalled windows 7 on my pc then chkdksk froze to 49% on step 5 of 5.  I even ran diagnostics from the bios and I use Seagate Seatools and two diagnostics says my hard drive is perfectly fine. I also tried running chkdsk in windows 7 cd and for some reason any he completed in less than 2 hours. I then ran chkdsk from the pc and then it froze again it made me think that there must be something wrong with my pc. So I was wondering how can I get chkdsk to complete my PC again once instead of using the windows 7 cd every time.

  OK, here's the link to the article: Windows 7 - How to fix bad sectors reported by chkdsk
  http://www.PAGESTART.com/win7chkdskbs01.html

  First read and post any questions you may have before you start.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• Pavilioin P6710f: Changing Bios then boot from a USB flash drive

  How can I update my bios to enable booting from a USB Flash drive. My bios is American Megatrends 6.07, 04/05/2011 and the only options are CD, hard disk, floppy. Is there a way to change this? To test the Windows 10 repair disk I created, my system froze to the blue screen "choose" keyboard layout. I couldn't use the usb mouse or usb keyboard. As a result, I had to restore my system to windows 7 using my Norton Ghost recovery disk and backups that I had done before downloading windows 10.

  After the opening of the bios and clicking on the hard drive by default, I found that I had a choice, including the USB Flash drive that I have pugged just forward to restart. This answered my question. Thanks to everyone for their contribution. It was not necessary to Flash the bios after all.

• Satellite, L9W Click-Mini-B does not start from the USB flash key

  I have a mini click L9W - B.

  * What I'm trying to boot from a bootable USB key.

  I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
  All USB keys to start correctly on my computer desktop and even with my other laptop.

  * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
  I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

  If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
  If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
  who can help?

  I hope that there are German support. -Hopefully, there are German-language support.
  If this isn't the case, please contact me.

  Message has been translated

  I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

  Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
  Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

  by the way: it's English language community

• Dell inspiron 531 BIOS Flash does not work in Windows 7

  updated my dell for win7 64 (from vista 32) but now dell BIOS flash not work

  Tried to run in compatibility mode, but seems no good either. It only extracts has winflash.sys of the file and do nothing more than that.

  Dell does not support this model with win 7 then you are my last hope :)

  Nothing says that you need Flash/upgrade the BIOS updated? Updated your BIOS is usually not necessary unless the update fixes a problem that you are experiencing.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• N200 bios flashes-> hard drive not found

  I have a Lenovo 3000 N200 0769.
  I downloaded the upgrade of the bios on the Lenovo site. The laptop stood awake for a few minutes after the launch and completion of lightning with explore does not, including the flash window is complete, normally closed.
  When he started upward again, I got normal screens, finally windows XP startup screen showed, but as soon as the blue line arrived in the second or third place, the computer go to the black screen asking for a normal boot, safe mode or the configuration was last started. All these options have led to a blue error screen that was shown for only a half second that I couldn't even read the error number, then all reeboted again and I got stüch with the display of black selection again.
  When I tried to repair windows XP CD (R key), he said that I have not installed hard drives. I got the same message when I tried to reinstall XP. The bios displays the installed drive. I also tried resetting the bios, no change. I found the article on the community of lenovo on how to reset the cmos, but it seemed that I had failed, either. Anyone alse said his drive Id changed to another thing and causet problem, but does not list how to fix that.
  I don't know what else to do. I need the data on the laptop ASAP and I want to say.

  Someone on FixYa said I need to remove the cmos battery and this is supposed to be under the keyboard. I removed the keyboard, but can't seem to find the battery. Is anyone please tell me where it is? I saw all the batteries in the world and I can not find even when it is... or maybe I have gist never seen one like this yet or what?

  BIG MISTAKE! Version 3.03 of bios is not the best for this model, especially if only a few months (like mine), has made in my case 3.03 caused trouble on the events of interruption-recovery repeatedly crashes on the post. Actually recovered 3.05 bios original and questions solved all this. Later, I will put the download link. You don't need to worry about bsod, simply change the sata to ide on bios mode and windows will go up. (the provided vista can assume the two, xp requires a change of driver before)