Problem using the average Musegrid widget

Similar Questions

• Problem using the AVERAGE function

  So, I have the following query:
  
  Oracle 10g
  

                  select distinct
                                avg(sum(plyr.avg_speed)) as tm_speed,
                                sch.game_code,
                                sch.home_team_name as team_name,
                                tm.team_id
                                
                         from
                                soccer.soccer_optical_player_gm_stats plyr,
                                soccer.soccer_optical_team_gm_stats tm,
                                customer_data.cd_soccer_schedule sch
                         where  sch.season_id = 200921
                         and    tm.team_id = sch.home_team_id
                         and    sch.game_code = plyr.game_code
                         group by
                                sch.game_code,
                                sch.home_team_name, 
                                tm.team_id

  When I try to execute the query I get the following error: not a function single-group grou.
  
  Some examples of data (and I've adjusted the query slightly to make it work with sample data):

  create table optical_player_gm_stats as (
             select 454654 game_code,32.546 avg_speed from dual union all
             select 887878,31.465 from dual union all
             select 454654,24.488 from dual union all
             select 454654,24.447 from dual union all
             select 887878,18.998 from dual union all
             select 255555,10.001 from dual union all
             select 200081,10.021 from dual
            );
            
  create table optical_team_gm_stats as (
             select 454654 game_code,5555 team_id from dual union all
             select 887878,1122 from dual union all
             select 454654,5555 from dual union all
             select 454654,5555 from dual union all
             select 887878,1122 from dual union all
             select 255555,5555 from dual union all
             select 200081,3144 from dual
            );
            
  create table soc_schedule as (
             select 454654 game_code, 'Cats' home_team, 200921 season_id, 5555 home_team_id from dual union all
             select 887878,'Sharks',200921,1122 from dual union all
             select 200081,'Grizzlies',200921,3144 from dual
            );
       
  --Adjusted query so it works with sample tables above     
    select distinct
                                avg(sum(plyr.avg_speed)) as team_speed,
                                sch.game_code,
                                sch.home_team as team_name,
                                tm.team_id,
                                null
                         from
                                optical_player_gm_stats plyr,
                                optical_team_gm_stats tm,
                                soc_schedule sch
                         where  sch.season_id = 200921
                         and    tm.team_id = sch.home_team_id
                         and    sch.game_code = plyr.game_code
                         group by -- plyr.avg_speed,
                                sch.game_code,
                                sch.home_team, 
                                tm.team_id  
            

  Published by: user652714 on May 12, 2009 11:42

  Hello, you should not use SEPARATE functions of aggregation (aggregation will produce the DISTINCT records in which you are going to GROUP BY for aggregation). In addition, AVG (SUM (()) makes no sense: AVG() on its own is what you need - it is never necessary to nest functions of aggregation like that.)

  Therefore, try:

  select  avg(plyr.avg_speed) as tm_speed,
                                sch.game_code,
                                sch.home_team_name as team_name,
                                tm.team_id
                         from
                                soccer.soccer_optical_player_gm_stats plyr,
                                soccer.soccer_optical_team_gm_stats tm,
                                customer_data.cd_soccer_schedule sch
                         where  sch.season_id = 200921
                         and    tm.team_id = sch.home_team_id
                         and    sch.game_code = plyr.game_code
                         group by
                                sch.game_code,
                                sch.home_team_name,
                                tm.team_id;
  

• My customer is having a serious problem with the Contact form Widget

  My Client is to have a serious problem with the Contact form Widget that I can't seem to figure out how to fix.

  I created a website for a client and inserted a widget of Contact form on the "Contact us" page Whenever someone uses the form, e-mail receive my client shows my e-mail address as the sender. So when they "meet" the email, the response is sent to me and not the person who sent the original message. This creates a major problem in that I get flooded with answers e-mail while my client's potential customers go without a response.

  When I look at ' Site Manager > email system > Workflow information > e-mail address on the site administration Console, it displays my e-mail information. This is what needs to be changed?  If this is the case, what needs to be placed in this field for the email address of my client receives presents information email senders in the field "from".  My client wants to be able to click on reply and the message sent to the right side. They would be very angry if should be cut and past shippers Correo electronico of the body text on all the contacts they receive.

  Their feeling is that if I can't find a way to make the contact form works as it should, then there is no need for them.

  Can someone help me understand this? I really don't want to disappoint my first client.

  Congratulations for your first customer! =>

  Looks like you can have your email in places where your customers email should be.

  Here are the places you need to change your e-mail address.

  First adjust the answering of your web form is your customer email. Screenshot: http://screencast.com/t/YWiZZ30E0jE and http://screencast.com/t/u4t69anTLR

  Second set Emails to come your clients e-mail system. Site management > system email > set default "from" e-mail. Screenshot: http://screencast.com/t/EAr2sfXk

  I always go through each email system and check the e-mail address after you set the default value. I found that it doesn't always change them for some reason any. Note: If you are on a lower to webCommerce plan your list can be shorter than what is shown.

  Make sure that the email you the list of customers is also an email they want in public.

  Also provide information on the TSA that thetrickster888 is good information.

  I hope this helps.

  Lynda

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Problems with the 'Text Ticker' Widget

  Hello, I have a problem with the widget "Ticker text." I tried to put more ticker and then a text on my site, but it does not work, when I look in Muse it looks like this:

  

  and when I look in the preview only the first text ticker works... maybe it is not possible to have more then ticker text on a site?

  

  Thank you.

  It seems that you use the same name for all instances of ticker on the page.

  You must have a unique name for each ticker you want on a single page. Strips with duplicate names will not work.

  

  See you soon,.

  Vikas

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• Problems using the iPad Pro notes app

  I have a new iPad Pro (IOS 9.2), but the notes app doesn't seem to work properly with a pencil. There is no line doodle icon and I can't write with a pencil. Can I use the pencil to 'click' on the functions as "BOLD" and new, but not as a pencil. Someone at - it experience with this and how can I solve this problem?

  Have you updated the Notes app in the app itself.

• Equium L40 problems using the recovery disk

  Hello

  I wonder if anyone can help me?

  I want to restore my computer but when I put the recovery disk in I select the cd/dvd rom drive by pressing f12 at startup.
  I also maintained pressed C when I lit. I select the disc I want to start the computer, it goes to a black screen, then it loads just windows up as usual.

  I phoned with Toshiba for help and all they could tell me was that as another drive worked on my computer, it isn't a problem with the disk drive, but a problem with the disc and it will cost me 30 quid for a new!

  Is anyone able to give me any help

  Thank you

  Hello

  If I understand your message, you are not able to recover the laptop using the Toshiba disc. Is this good?

  Well, in your case I recommend to start from another original Windows XP CD bootable disc or Vista DVD or a Linux drive to test if the CD/DVD drive can handle this drive.

  In this case, you can test if your CD/DVD drive is faulty or if the problem is related to the Toshiba DVD recovery.

  Welcome them

• M277dw: Reset zero problem using the USB to M277dw

  Hello, I'm just trying to see if anyone else has had this problem. I use the laserprinter HP M277dw and use a current running nine Imac El captain. If I print anything on my printer and then decide to reboot my computer for some reason any, if I keep the USB cable connected to my computer that is connected to the printer, the computer hangs on reboot. It is the same on a full stop to the low and new start up as well. It's almost as if the printer is not disconnected somehow when I shut down or restart. The solution I found is to unplug the printer USB whenever I have to restart or shut down and then reconnect to the computer up and running again. My feeling is that this is related to the El captain, but I can't say for sure. Anyone else see this problem?

  Hi @andrewdawson11,

  Welcome to the Forums of HP Support! I see that you have problems, turn off the Mac, it crashes on restart when the printer is connected by a USB connection. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run Apple updates.

  You download and install the latest drivers for the printer? If the latest driver is not installed, which can cause this problem. Here is the link if you have not already: HP Easy Start.

  Make sure that the correct driver is added.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M277dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If the problem persists, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Test the printer and try to restart the Mac again.

  If there is anything else I can help you, let me know. Thank you.

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Problem using the Overdrive Media Console software program

  When I try to download audio files using the Overdrive Media Console program (used by the public library in my area) I get the error message "error) xC)) D2781: problem occurred in the identification of rights management digital retriving.»   What is the reference for this?

  Hello

  • What is the format of audio file you were trying to play?
  • What version of Windows are you using?

  You can follow below link that can help you to solve your problem:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11E2&ContextId=71&OriginalID=C00D2781

• I have problems using the parental control. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  Have you followed all the steps like that?

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-parental-controls-to-filter-websites-in-Windows-Vista/

  It is an alternative.

  http://explore.live.com/Windows-Live-Family-Safety?OS=other

  http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

  If this post answers your question, click mark as answer .

• Having a problem using the request of Sirius/XM.

  Hello world. I recently downloaded the Sirius/XM app on my phone, because it allows me to listen to and still take calls throughout my non bluetooth car system, using the input of the car radio. I have the phone cradle-mounted car of Motorola. All my other radio apps will turn horizontal / landscape with the phone, but the Sirius app does not work. It can be quite dangerous trying to find stations or songs while driving when you arm yer head sideways to read the list on the screen. Today, ' I can't ' get smoked a number with Willie more "came and I was trying to see who did the song. I almost lost control of my car!  Anyone know if this is a problem of motorcycle or Sirius? I also emailed Sirius/XM about it. Anyone else having the same problem? Thanks, Matt

  If other applications are running, I believe it's the app that was not intended to turn. curious to see if they meet you?

• problem using the FileConnection API (JSR 75) in an application for Blackberry "BOLD" MIDLET

  Hello

  I developed a MIDLET which is to read files and store the contents of files in arrays. I could make using the FileConnection API in J2ME (Java ME) and it works very well in mobile emulators provided by Sun, Sun Kit tool 2.5.1 wireless and Sprint Wireless tool 3.3.2 Kit. I have been using netbeans IDE 6.8 for this.

  Now, here's the deal. Playback of the files does not work when in one of the Blackberry mobile emulators. I tried to install all versions of Blackberry JDE 4.2.1 to 5.0 and test the same thing, but none of them worked.  After reading that the Blackberry plugin for Eclipse is good, I used it to find that I am always faced with the problem.

  I desperately need help. Can someone help me do the reading work file in a Blackberry emulator? I insert the code that makes the file reading. It reads a file containing a single column of 60 entries, and stores it in an array of double type.

  Vector time = new Vector();
  
  try{
  
   FileConnection filecon = (FileConnection) Connector.open("file:///" +"SDCard/BlackBerry/documents/"+"timescale.dat");
  
   if(!filecon.exists()) {    Dialog.show("Note ! ", "File doesn't exists !", "okay","cancel"); }
  
       StringBuffer sb = new StringBuffer();      try      {       InputStream in = filecon.openInputStream();       int chars;
  
         while ((chars = in.read()) != -1)// read until EOF is reached       {          if(chars == '\n') // read all characters until the end of line is reached          {              time.addElement(sb.toString().trim()); // stores all the characters as a vector element when the end of line is reached
  
                sb.delete(0,sb.length());// clear the stringbuffer for storing the next line of the file
  
            }
  
            else          {              sb.append((char)chars); // appends each character read          }
  
        }// end of while
  
      }    catch(IOException e)    {               }
  
      filecon.close();
  
  }// end of outer try
  
     int i =0;   Enumeration etime = time.elements();
  
     while(etime.hasMoreElements() && i < 60) // timescale.dat has 60 entries in one column   {       time_1d[i]=Double.parseDouble(etime.nextElement().toString());// convert to double       i++;   }
  

  Can you elaborate on what does not work?  Is an error or exception thrown?  If Yes, what is it and what line of code triggers it?

  You have configured the BlackBerry smartphone Simulator to simulate a micro SD card?

  Use a computer filesystem in the form of microSD card

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/use-a-computer-file-system-as-a-microS...