Msconfig does not

Similar Questions

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Msconfig does not start when typed into the starting box?

  Msconfig does not start when typed into the starting box?

  Original title: windows

  What is the listed program in 'C:\Windows\System32' if you look in Windows Explorer?

  If this is the case, it starts if you click on it?

  Update your anti-virus software and run a full scan.

  Then download, install, update and run a full scan with malwarebytesfree. (Keep free, no need to enter in any trial etc.).

  Then run a sfc/scannow to see what that brings.

• Msconfig does not and when I try to install it from microsoft, it is said!

  Setup has detected that the version of the service pack from this system is newer than the update you are applyingnow do - what I do?

  I first noticed it when im trying to sort out my startup programs by going to start > run > msconfig, but when I press on enter I get this message. Windows cannot find 'msconfig '. Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Now my mrt.exe still works, I think that there is a virus or something on this laptop.  now what should I do?

  info if it's of any use to you

  Microsoft windows xp media center edition sp3
  1 GB of RAM
  150 GB HARD drive
  1.80 GHz intel cpu
  Yes I know it is an old laptop, but my broken new and cannot afford to fix it again. I have a Windows xp disc, but units not media center edition, just xp home edition if this can help files or folders.

  Help, please...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-cant-find-my-Msconfig-file-how-do-i-find/202b89b1-F949-E011-8dfc-68b599b31bf5

  Read this thread and see if it helps.

  I would also like to do the following:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

   

  post back with the results and what is your current antivirus?

  brand and model of the pc?

• File associations and MSCONFIG does not properly.

  Original title: when I click on
  1. When I click on start-all programs-accessories-SYSTEM tools. just show internert explore (Add-ons) and schedule the task. so my question is (1) where the restore point?
  2. (2) and any other program that must be there. ?   now when I click on start-run and type"mscongfig a window that say file is no funds. "where is he?

  1. If the system restore is on, and you can't find really no point of system restore, you can be infected by a virus.  Viruses like system restore points and tend to run after them.  Run an Antivirus in safe mode with network (that you already have or in Trend Micro Housecall).  Once this and you have fixed any issue pending, turning the system restore on will generate a new point catering for you and you should be good to go.

  Source: http://www.computing.net/answers/security/how-to-recover-missing-system-restore-points/31955.html
  2. you type 'Msconfig' in the window run?  If it is not to come, once again, he could be the victim of a problem of possible virus as indicated above.
  I hope this helps!

• MSConfig does not display the item (by default) startup under HKCU\Software\Microsoft\Windows\CurrentVersion\Run. Bug creates the feat of malware to hide the user startup items, msconfig.

  The following question will fail be displayed in MSConfig

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]
  @= "c:\\users\\steven\\appdata\\local\\temp\\6csjbd5.exe".

  I came across this, after being attacked by malware. In general, I use MSConfig to disable all startup items when troubleshooting an attack and attempt to regain control of the system. MSConfig lead me to believe I had disabled all startup items, but he fails to show or disable the (default) entry to the registry key above. Indeed, it's an exploitable bug that is currently used by malware developers to hide from end users, armed with MSConfig. As a side note, CCleaner has the same problem. The only solution is to change the value directly using RegEdit (clear).

  Hello

  Method 1:

  You can run Windows Defender in offline mode

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  Method 2:

  Analysis System File Checker and check:

  How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  I hope this helps!

• MSCONFIG does not detect multiple processors

  Original title:

  I want to boot the system with 2 processors, but only 1 in msconfig recognize me, please help!

  Hello

  Follow these steps and do a test:

  a. Click Start, in the start search box type in msconfig and press to enter.

  b. Select the Startup tab.

  c. click on Advanced Options.

  d. uncheck 'Number of processors', restart your computer

  e. follow step 1 to step 3.

  f. recheck 'Number of processors' and see if the menu drop-down lists 2. If so, select 2 and click Ok and apply the settings.

  I hope this helps.

• computer management does not display services properties

  I am running windows xp.  I have a multitude of programs that won't run.  This seems to be the result of stopping some services or changing a property in the management of the computer.  Backup and restore are not running at all, not even an error since the desk top.  Internet Explorer will not work.  CPP will not start.  .Net runtime op... will not turn on, start, or view properties.  None of the computer management services show the properties.   Not active album or start or display properties.  net port sharing. TCP will not allow, start or display properties.  Network DDE will not activate the starting or display properties.  Reduced programs do not display the taskbar.  1068 and 1058 errors disk logic Server Management error.  Msconfig does not solve this problem not start in safe mode.  How can I fix this computer?

  Hi Tommy,.

  If you find that the Windows disc is faulty, access the link below for more information on how to get the replacement of Microsoft software.

  http://support.Microsoft.com/kb/326246

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Chicony webcam on Satellite Pro P200 1.3 does not work properly

  This built-in Chicony webcam is slowly driving me insane.

  Sometimes it works (not since last week though). Usually, I get a message saying it is locked by another application - or it does not exist. Now, I can not even friends view webcams.

  The cam is displayed on my screen and seems perfect, but no one can see me! When I try to view the cam of friends, I am told that it is not connected.

  Now, I checked my device manager and it is not yet installed-just disappeared! I have recommended download driver Toshiba Europe (camsoft-2007081...), uncompressed, ran it, restarted, but apparently my laptop does not detect the webcam - even if a blue light flashes!

  Please get out me of my misery... someone!

  Thank you, thank you, gratias, go raibh mile, etc., etc.

  I read that sometimes the internal TV tuner would block the internal webcam and so this error message.
  But as far as I know this laptop was not equipped the internal TV tuner, and therefore, this possibility is not relevant.

  Always is it that any application locks the webcam software. In case you would you recommend to go the msconfig and disable first the webcam services that run in the background. Then turn it back on.

  In most cases, this helps!
  By the way; I noticed this problem only with yahoo messenger and ms. Skype works ok!

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Portege M800 - Chicony Webcam does not work

  I have a Portege M800 and the Camera Assistant Software simply does not work.

  I upgraded my Vista 64-bit Service Pack 2, I reinstalled the driver several times and I downloaded the latest version of the Camera Assistant Software from the Web from Toshiba site and nothing worked.

  I get a 'preview of no.' when I load first it and 'Graph making Fail' when I go to the video.
  However, the only thing is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  Please help me!

  Hello

  > The only thing however is that I know that the camera itself is very well because very rarely it will work on MSN messenger, but he has not responded to other programs.

  This means that more different applications have access to this camera. Is this good?
  I think that is the question!

  In your case, I recommend you to disable the webcam software in msconfig-> Startup tab.
  In addition, you must disable the MSN also in msconfig. The point is that only an application that uses and sharing the webcam should run in the background of the OS.
  I think that this would avoid problems with other software

• DVD/CD drive does not at all on Satellite A100/A105 Series

  Hello

  My CD-ROM/DVD-Rom went completely unoperative. The LED does not blink and it is not ejected, with the key or with a software command.
  The drivers are listed as being activated, they are:

  LP3307P RPB109J SCSI CDROM DEVICE
  YN2495K TDG329D SCSI CDROM DEVICE

  The only reason that I can think of is that while twisting my startup with MSCONFIG process I have somehow turned off my drive.

  Thank you very much for your help.

  Alan

  Hello

  It looks a bit like a malfunction of the equipment.
  I came to this conclusion because the start of the recovery disk is not possible too.
  Therefore, it would be advisable to contact a technician for laptop for a CD/DVD drive control and the replacement.

  Welcome them

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• Touchpad does not work on the Satellite A100-812

  Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
  Help, please.

  ([email protected])

  Hello

  you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
  Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

  Would be recognizing a few comments if it worked. :)

  Welcome them

• Pavilion 500 - 206t: Boot Manager does not appear in the sources of boot UEFI

  I had a working system, until I installed Fedora on it...

  I have since removed Fedora, but cannot get the windows partition to start for the life of me.

  In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.

  I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.

  I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.

  formatted fat32 EFI, left the msr as-is.

  C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot

  Creates the via bcdedit boot manager entries.

  I tried:

  1. Bootrec /fixboot
  2. Bootrec /fixmbr
  3. Bootrec /rebuildbcd

  I also used boot bcd with uefi function to copy the files on

  I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.

  Am I missing something for the HP Pavilion?

  Thanks in advance

  Repair of windows did nothing.

  I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)

  Then I deleted all partitions with parted magc.

  Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.

  Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381

  don't worry about formatting new partitions.

  To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq

  After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.

  Then, install windows 10 to get a true EFI boot.