Problem opening of my flash drive in windows 7

Similar Questions

• Problem with 2 USB flash drive in Windows XP sp3.

  I have a USB 2 pci card - USB 2 card, with the hub 7 ports (powered) USB. Sometimes, everything works fine. Most of the time I can't access flash USB dirve. Printer, scanner, camera, photo, mouse, all connected work very well. Plug the flash drive and errors occur. The flash player works fine in laptop (Win xp sp3). Difference between the two machines, the laptop has only 2 USB ports. Have tried to uninstall the USB controllers and re-setup. Flash drive works fine in the desktop integrated USB 1.1. Have checked with Kingston USB drive flash technical support without success.

  When dirve flash does not, Device Manager displays the flash player at the top of the page section of controllers USB bus, as well as generic USB (USB 2?) hub. When the flash works do not drive, hub Generic USB appears in the second USB bus controllers.
  Someone help? Please, I beg you.

  Hello

  Tried your suggestions, without success.

  Have now connected powered hub USB 2 on my edge USB 1.1, with all devices USB works fine.

  Probability of problems seems to be my pci - USB 2 card.

  Being disabled, it is very convenient for me to have the hub USB 2 powered on my work surface to facilitate the connection of my devices.

  Thanks for your help anyway.

• Error 0 x 80070570 when you access my flash drive using windows 7

  I get an error 0 x 80070570 when you access my flash drive using windows 7, but the same flash drive works perfectly on two other PC's with Windows XP. It's frustrating because I need to backup and transfer files.

  Hello
   
  1 you get an error message with this error code?
  2. is it a problem with this particular flash drive only or all flash drives?
  
  Let us run the check disk utility.
  Here's how:
  a. open the computer by clicking the Start button, click computer.
  b. click the drive you want to check, and then click Properties.
  c. click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  d. Click Start.
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HOW TO REMOVE WRITE PROTECTION IN MY 32 GB FLASH DRIVE CONTAINING WINDOWS 8

  I have a 32GB flash drive with windows 8 inside. I want to remove the inside write protection so that I can use it for other uses. I tried all methods available online and it did not work for me. What can I do?

  JPRRP,

  Try these steps and let us know if it helps.

  Important Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  1. Right-click on the Start button and select run and type regedit.exe and press ENTER.
  2. Navigate to the following location:
  3. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  4. Note: If the StorageDevicePolicies registry key does not exist, you must create it manually.
  5. Highlight StorageDevicePolicies, and then create a new DWORD called WriteProtect(32-bit).
  6. In the right window, double-click the registration key and set the value to 0 in the value. Data area, and then press the OK button
  7. Restart your computer and check if the problem persists.

  Let us know the results.

• How to format a flash drive using windows 7?

  question: how to format a flash drive using windows 7 OS?

  Hello

  1. Connect the drive to a computer
  2. Click on the button - computer and locate the flash drive,
  3. Right-click on the Flash drive and select "Format".
  4. Click on 'start '.

  Note: Do not forget to save files you want to keep from a flash drive before formatting.

  It will be useful.

• Flash Drive causes Windows Mail Crash when send link by E-mail is selected in Internet Explorer

  I am running Vista Home Premium 64-bit on an HP Pavilion laptop and a curious problem.

  When I have a flash drive into a usb port and when using Internet Explorer 8, click "send link by e-mail", I crash Windows Mail... the usual error message "stopped working" and "restart".

  I don't have this problem in any other circumstance.

  If anyone has any ideas on this, I'd be fascinated for feedback.

  Thank you!

  Peter

  Hi Petergoode,

  A. Since when do you use this question?

  B. recent changes made on your computer?

  C. This only happens with this flash drive?

  D. is - what happens on the other computer also?

  Try the methods below.

  Method 1:  Check your drive for errors

  Follow the steps in the article. Choose the Flash DRIVE instead of the hard drive.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  If the problem persists, you may back up your data and format the flash drive, and check the status.

  Method 2: new user account

  1. Open a user account by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. Click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click create a new account.
  4. Type the name that you want to assign to the user account, click an account type, and then click create an account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try these methods and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• The request cannot be performed because of the I/o device error when opening a USB flash drive

  Original title: USB Flash Drive issues

  So, I tried to open my flash drive on my Dell Inspiron 15 with Windows 8 today to make an assignment. But for some reason some it does not open. This is what appears when I try to open it. I've done many things that are supposed to solve the problem with the ports themselves, but nothing seems to work that makes me think that it is the actual flash player. I don't know what to do all that my University materials are there then I really need to work, or at least find a way to get at least most of my files. Thank you very much for the help in advance.

  Sorry for the late reply Jose. I appreciate your efforts to resolve the issue.

  This can occur because of one or more of the reasons below:
  1. the currently loaded USB driver has become corrupt or unstable.
  2. your PC requires an update for problems that could conflict with a key USB and Windows.
  3. Windows may miss other problems hardware or software updates.
  4. your USB controllers may have become unstable or corrupt.

  Check the disc on another computer flash memory to ensure that the issue is not with the device.

  You can try the methods below:
  Method 1: Uninstall, then reconnect the USB flash drive:
  This method solves the problems where the currently loaded USB driver has become corrupt or unstable.
  1. go in search for, type device manager in the search box
  2. click on Device Manager in the returned list.
  3. click on disk in the list of hardware drives
  4. right click on the USB with the question and click on uninstall.
  5. once the flash player is uninstalled, unplug it.
  6. wait 1 minute and then reconnect the USB flash drive. The driver should load automatically.
  7. look for the USB key in Windows Explorer

  Method 2: Reinstall the USB controllers.
  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
  1. click on start, type device manager in the start search box, and then click Device Manager.
  2. expand Bus USB controllers. Right click on a device, and then click on uninstall. Repeat for each device.
  3. Once complete, restart your computer. Your USB controllers will automatically install.

  I hope this helps to solve the issue. If you still have the same problem, get back to us.

• How to transfer music from my PC to my flash drive in windows 10

  How to transfer music from my PC to my flash drive?

  You typed "Windows 10" in your subject line, but you have selected the option that you are using Windows Vista... which is?

  In any case, the easiest way is to open the 2 folders: your music and your Flash drive.  Then just drag - move the top songs.

• How to use a flash drive on windows 7 64 bit

  I bought a 128 GB Flash drive before reinstalling my windows. Can you please advise me how to use it to save all, My Documents, Internet explorer, Mozilla Firefox & Google Chrome I have many Favorites saved on all of these programs.

  Thank you very much

  Mr J R wild.

  Open your user folder:

  Press Windows key + R

  Type: %UserProfile%

  Press enter on your keyboard

  Select view files and folders

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  then

  Highlight all folders in your personal folder (press on Ctrl + A or click on organize > Select All)

  

  (Press Ctrl + C or click arrange > copy)

  Open the thumbdrive

  (Press Ctrl + V or click arrange > stick)

  When you enable Show hidden files and folders, it copies the AppData folder that copies your custom settings for applications like Word dictionary and bookmarks for applications such as Chrome and Firefox.

  Go to the work computer, then copy and paste these files in the respective locations.

  Don't forget to enable Show hidden files and folders.

• How to recover a file on a flash drive that windows removed

  Windows said there was a problem with my removable drive (flash drive) and asked to scan the disk and fix it... other messages that I read says you should do.  I did, but now something very important on the flash drive is gone. I always use the safely remove hardware and eject media option before removing the flash drive.  How can I retrieve this file?

  You can't, it's gone.  You will need to get your most recent backup copy.  Flash drives have an average duration of 4 years direct, but many die younger (30% die during the first 2 years). And don't forget, some die faster.  Take this into account when you use flash drives and always keep a copy of your files in a backup or place online like OneDrive.

• How to send data to a flash drive for windows 8

  I have a Toshiba Satellite laptop windows 8. I took the data from my old XP on a flash drive, but cannot find a way to transfer it to windows 8. When I plug the USB in, an ad for Clickfree appears and now at all nothing happens. Am I supposed to get the flash player will in another way? I only am not very PC to mind so would like a simple answer. Thank you.

  Hi Ruth,.

  1. what type of data you are trying to transfer using the flash player?

  2. using a Clickfree Traveler automatic backup flash drive?

  I seems that autoplays flash player when you plug in the appliance.  Instead of trying to Autorun flash drive, you can copy and paste the data to the PC Windows 8.

  You can also turn AutoPlay and check if it helps.
  a. in the start screen, type autoplay and click on AutoPlay in the list.

  b. now, under removable devices, click the menu drop down and choose non.

  c. click Save at the bottom of the window.

  Now, to copy the contents of the drive to the computer, follow these steps:
  a. plug the flash drive into an available USB port.

  b. navigate to Windows Explorer.  To open Windows Explorer, simply type computer from Windows 8 start screen and click (computer).

  c. here you can access your USB key. Double-click the device and display the data.

  d. now you can copy and paste the data to the location of your choice.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• problems related to the flash drive

  My flash drive is enabled and active x is not yet in the test for adobe, he says that it is disabled. What should I do now?

  It seems that my problems are solved themselves. Everything seems to work properly.

  The wonders of Windows 8.1Thanks, Bill

• Problem with OTG USB Flash Drive - Lenovo a7000

  Hello
  I recently baught a Lenovo A7000 and it's great. I've set my default storage in the form of SD card and many applications are installed on the same, but the problem I am facing is when I connect to the USB OTG flash drive (it works fine). When I take it apart all the applications on my SD card are not visible on the home screen. However, girls are on the only sd card, but the just icons are not displayed. Whenever I connect OTG all apps are visible again after removing the OTG same problem each time.
  Please help me solve this problem. I want my apps to install to sd card, but not on the drive Flash OTG.
  What should I do? Thanks in advance

  Well, the problem is solved only when restart us the machine, but it's still
  not convenient to reboot each time that you insert an OTG. He really needs a
  Difficulty again.

• T410 text selection problem w / Intel HD Graphics Driver for Windows 7 (32 bit)

  After I've upgraded to the latest Intel HD Graphics driver for Windows 7 (32 bit) and Vista (32-bit) - ThinkPad T410, T410i T410s, T410si, T510, T510i, X 201 X201i, X201s, and X 201 Tablet

  Version: 8.15.10.2025

  Release date: 29/01/2010

  Who is here.

  I came across weird questions, highlighting the text. Essentially, my text highlights but may be of different colours (some too light to see). After getting this weird highlight, I can minimize, maximize, or move my window off the coast and back on the screen and the highlight will be one color.

  This problem goes away if I return to the 8.15.10.2008 version.

  Example 1: question	Example 1: Problem after restore/maximize window

  Example 2: question	Example 2: Problem after restore/maximize window

  
  

• How to install Windows XP using USB Flash Drive in Windows 7?

  I m windows 7 and want to install windows xp, how to install windows xp using a usb flash drive. I have the iso file from xp.

  Hello

  The Microsoft Windows 7 USB/DVD download tool is designed for the installation of Windows 7, is not for the installation of XP.

  I suggest that you use Google that Microsoft does not support what you want to do.

  http://www.computerhope.com/issues/ch001366.htm

  ______________________________________________

  As you have the ISO file, make a record with him:

  https://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  See you soon.