Problem with autonomous ripple: not more GUI and panels
Hello
Until today, the ripple standalone emulator worked.
Then, I started today, and it brings the 404 blackberry without any UI Developer site (address bar, panels, etc...).
I have not found a way to reset the emulator of ripple in fresh condition.
I even tried uninstalling and reinstalling without success.
Any idea?
Thank you
Emmanuel / Alocaly
Hello Emmanuel,.
Can you please navigate to the following folder:
C:\Users\[user]\AppData\Roaming\Research in Motion\Ripple
Here, please Edittheconfig.ini file and check that:
windowContent =http://developer.blackberry.com/ripple/
In addition, please remove all except the config.inifile. Note, you will need to complete your training with your SDK paths settings after that.
This should reset your Ripple emulator to point to the correct location.
If you are on a different operating system, could you please confirm what OS you are using?
Tags: BlackBerry Developers
Similar Questions
-
problem with running my games more old and newish on Windows 7. __
Why is there such a probllem with my older games running and more newish on Windows 7.
If I knew that I would probably be stuck with vista or XPYes, probably you if you use the computer half the time for older games. It is like buying a PS3 with the emulator software and expects all the old games to work, just not going not to happen.
All games in particular does not? Usually running the installer as administrator (right click, run as admin) works for most things and then launch the game itself in compatibility mode sometimes fixes things.
-
Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.
Hi Chaz,
I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.
Please answer these questions to get a better understanding of the issue.
1 have changes made to your computer before this problem?
2 shut down other applications while they are in use?
3. do you get an error code?You can try these methods to check whether the problem is resolved.
Method 1: Run the troubleshooter of app.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Open this link to launch the troubleshooter.
Method 2: Update the application.
Method 3: Reinstall the application.
This link has the steps that you can follow to update and reinstall the application.
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Feel free to use the forum for any other issue of Windows, you may have.
-
the site theme is problem with firefox, but not any problem of chrome with!
the site theme is problem with firefox, but not any problem of chrome with!
for ex: http://haftegy.ir
How to fix?Wow sorry! IM update firefox to the latest version and my problem is solved.
Thank you very much. -
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!
I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.
-
Problems with the installation of the bridge and the company
Hello world!
I have problems with the installation of the bridge and the company. Although I have install both of them successfully, when I try to connect to the gateway through the console I have error message saying there is no company installed. In fact, I get an error as well through the wizard saying "failed to run. Please see details below:
Unable to launch: "C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\LRE19.tmp\bin\java.exe-Dtemp.dir=C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\ - cp C:\siebelent\siebsrvr\bin\setup.jar run - args LANG = ENU VISIBILITY = REPEAT BUSINESS = FALSE MODE = MODEL_FILE=C:\siebelent\siebsrvr\admin\siebel_server_sia.scm LIVE" error code: ""(SBL-STJ-00152)-1 "»
Also, when I try ot run the following in the console: C:\siebelent\gtwysrvr\BIN\srvrmgr.exe - u - p SADMIN SADMIN - g siebelwin2k32-e SIEBELENT, I get this error: fatal error (3015667): the program variable 1% is not defined, existing...
Thank you in advance for your help!
MARIANAMariana,
Please confirm if you try to configure the siebel server in the same machine as the gateway server. If so try to use localhost instead of the hostname of the machine setting up Siebel server.
I assume you are using windows 2003 as the operating system.
Thank you
Wilson
-
Problems with version 10 of the OPM and Java
Hello
After installing OPM 10 I try now to execute the decisions of Oracle's Web, but fail. I know I need to at least Java 1.5, but Recalling the JRE 1.6.0_17 and 1.5 in system JAVA_HOME and OPM Menu-> tools-> options-> development-> Run (of course not at the same time) rules, I get always a message that says I need to at least java 1.5. Now, looking at the documentation, it tells me
Had a job 10 OPM in mid-December, but after having to change drive and the following facilities from 10 OPM and Java this problem started.
Someone at - he had the same problems or heard of him?
Concerning
/ Rickard
Edited by: user11259027 13-jan-2010 03:20
Published by: Rickard E on 13-jan-2010 03:26I have the feeling that OWD will work if you change your English locale (or anything other than Swedish). There seems to be a problem with the localized JRE.
Control Panel... Regional and Language Options... Standards and formats
-
I have a problem with the drag (cursor snap) video and audio stuttering!
I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering. my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine. Are there updates or the settings that I can apply to correct this problem?
http://www.eMachines.com/support/drivers.html
The latest drivers/software for your machine come directly from eMachines.
Click the link above for them.
See you soon.
Mick Murphy - Microsoft partner
-
I read FF posts of the community, and it seems to be a problem with a lot of ppl. It happened for about 3 days now on all our computers at home and work. This cannot just be linked to a computer if this happens for many. I was wondering if there is a general problem with FF, is that what is happening for many users. When I start FF I am lucky to get 10 sec before it does more, ready to give FF film! I use it in safe mode now & use of IE next until I find another solution other than resetting FF. FF should maybe see if there is a problem at their end, & then show us how to fix it.
To return to regard to extensions, you can view and update the extensions on page modules. Either:
- CTRL + SHIFT + a
- Firefox orange (or the Tools menu) button > Add ons
In the left column, click Extensions. Click the "gear" above the list, and then use the check for updates.
You can also disable non-essential or unrecognized extensions (or so obviously not good, remove them).
Typically, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Any improvement?
-
After removing the package of printer drivers HP, all attempts of resettlement via WLAN regularly fail before the end, which indicates that the device is not found. I physically connect the printer to the computer by USB cable to install the software successfully. When I go to WLAN Wireless thereafter, the printer works perfectly within the network. If I remove the USB cable, the following error message appears when I try to start scanning HP: HP CLJM377 Scan found . In other words, HP Scan cannot be used with a PC not connected by USB cable. All other remote features function normally printer in wireless, including HP Scan & Capture. Is there a possibility to correct this, via the Windows registry from my PC?
MrRobot wrote:
Hello! @Chirsistei, your description of the HP product is classified as a commercial product (business). Our sales support team provides support via the channel of entry here. If you need immediate assistance, you will need to open a session one business with our sales support team. Click on this link http://ow.ly/I3gw30140F8 for more details.
Let me know if you want more information and/or assistance.Have a great day!
See you soon!
Hello Chetan,
I think I'm in the wrong forum here because I live in Switzerland and here the Laserjet Pro M377dw color is sold to private users. I have no access to a support plan and use the printer in my home office network. Your proposed solution therefore does not help me, during this time, I have posted this problem in the forum on language German you need not to pursue this new. Thanks anyway
-
Problem with vista 64 - not another update
I am running vista 64 ultimate sp1 and for some reason, I can't take
Update cumulative security for IE7 for Win x 64 (KB972260) 8007371b
SP2 KB94865 800F081F
IE8 for vista 64 8007371bI have tried and read all what google can find
I ran the Fixit
I ran sfc/scannow - no problem
I ran the tool - no error
I disabled and then uninstalled mcafee
I disabled at startup, which was not microsoft
I tried as well the update of windows and programs stand-alone installation for all updates 3 - no difference
reinstalled windows update customer... no diff
tried in safe mode - same mistake
renamed caroot2 and software distribution directories - nopeI'm starting to think this is a problem with ie and you cannot uninstall it. I tried to install these updates several times and I got other errors and even once told me I didn't need the update (2260). I think I had a 80073712 and 7000 d also, not sure update. These errors only came once or twice, said them are the main errors
the strange thing is that there still updates
It took these updates after the factUpdate security for Windows Vista for x 64-based systems (KB973768)
A security update for Jscript 5.7 for Windows Vista for x 64-based systems (KB971961)
Update for Windows Mail Junk e-mail filter for x 64 systems [September 2009] (KB905866)
Update security for Windows Vista for x 64-based systems (KB967723)
Update security for Windows Vista for x 64-based systems (KB970710)
X 64-September Windows malicious software removal tool (KB890830) 2009
A security update for Windows Media Format Runtime 11 for Windows Vista for x 64-based systems (KB968816)These upates are more recent than those that it won't take.
I even tried to reinstall an update but after sitting between 4-5 hours and thinking that he was going to work, he stopped on the last line to 60% and pops up a message saying that he could not continue and it has been reinstalled the origin o/s. I think that this may be due to fact I said to take updates, maybe I should not have.
Hello
Welcome.
A clean install will thus fix registry problems.
All the best!
Thank you, and in what concerns:
Diana D D - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problem with my Acer Aspire 5552-5686 and 5.1 Audio HDMI
Hi all, I recently bought a SONY HT-SS380 Home Theatre, and I tried to connect it to my Acer Aspire 5552-5686 by HDMI port. (I have Windows 7).
My problem is that I have can´t set up the laptop to use more than 2 channels (stereo). I ve been looking around the internet and there seems to be a common problem with this computer, but I can´t understand why or how to fix it.
I ve tried to install the latest Realtek Audio drivers, the Catalyst Control Center, some Audio HDMI of ATI drivers. I Don t know what else to try!
Any help?
Thank you very much!
This isn't the audio chipset of this system, which I listed above.
The audio chipset to send the data in 5.1 surround. The HDMI port would support, if it was sent.
It is not sent in this way, I listed above.
-
Hi all
Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.
To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.
A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.
I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.
Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.
I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.
I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.
Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.
Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.
If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!
DISM is a thing of Windows 7. First test the hardware.
Standard hardware troubleshootingFirst to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.
Diagnosis of memoryIf you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.S.M.A.R.TStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason ListIf it is on will be true, otherwise on enable in the BIOS of the computer.Predict the failure must be False if everything is ok.In Vista and later if SMART failure predicted Windows prompts the user to run the backup.Run chkdskIn computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).sfc/scannowHeatHeat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.For memory diagnostic resultsClick on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-resultsDouble-click the entry for more details on this entry.For results of Chkdsk
Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 50 , and the Source is disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS
Look for EventID is 134 and Source is NTFS
Look for EventID is 137 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is ChkdskLook for EventID 26213 and Source is Chkdsk
Look for EventID 26214 and Source is ChkdskDouble-click the entry for more details on this entry.PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|moreThere are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these. -
Problems with file extensions, Vista is slow and crashes
Salvation of problems with file extensions... My computer is very slow and is stuck...
Hello
Use the startup clean and other methods to try to determine the cause of and correct problems.
-----------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Maybe you are looking for
-
HP Officejet Pro 6830: Printer does not print logo company
When I print our company logo (for the most part happens when print us invoices) the logo appears just a square black Uni, what can I do to fix this?
-
BlackBerry Smartphones Roller ball questions
I have problems with my wanting to go horizontally ball. I changed my settings and sensitivity, but that did not help. Anyone else having this problem or knows how to fix? Thank you Jason
-
Localhost does not not on Win7 Ultimate 64 bit
If this post is in the wrong section, maybe you can tell me what is the best. So as the title says, I can't use localhost on my computor. If the answer is simple, I don't find he or she did not. As with most, I installed Xampp to use as a test system
-
Creative photography plan Cloud
I have a subscription to this plan which my partner and I use it for post-processing of our digital photos.Is it possible to install and run on more than one machine, as it is currently only on my laptop?If my girlfriend wants to use it on his cell p
-
Hi all11.2.0.3AIX 6I checked our database of prod, and I discovered that recyclebin is off.Is this really a critical parameter? We did not really use his goal eversince.Have effect on performance during stop or?Thank you all,pK