Problem with connection diagram - BNC-2110 to PCI 6280

Similar Questions

• BNC-2110, 6023E PCI card and Labview V9.0: is the sensitivity of data acquisition (change more little detectable voltage) 0.002V?

  BNC-2110, 6023E PCI card and Labview V9.0: sensitivity of data acquisition (change more little detectable voltage) is 0.002V

  Hi, I use the software/hardware above to read a voltage of a potentiostat world Precision Instruments No..

  I'm trying to record changes in voltage as low as 0.0003V but using the wizard DAQ, I seem to be limited to a sensitivity of 0.002V.  This is the limit of real sensitivity or have I missed something?

  Any help would be greatly appreciated.

  Hi DCAM77,

  Thanks for joining the forums!

  The PCI or 6023E has a 12-bit ADC.  In other words, it can make the difference between 4096 (2 ^ 12) different levels within the range of cards.  The card you have has a selectable range by ± 10 V, ± 5 V, ± 500 mV or ±50 mV software.

  This means that the minimum detectable variation will be 4 mV, 20 mV, 244 µV or 24, depending on the chosen range µV.

  You should be able to use the ± 500 mV or ±50 mV to get the least significant bit (LSB) value, you need, even if it means that your signal is located between these values.  If not, then you need to consider other materials to the application, or the addition of external circuits across the signal.

• There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled error code 39.

  HP Pavilion 17 laptop

  There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.

  OT: Driver help

  Name:	PCIe Ralink Bluetooth adapter

  Error code:	39

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  What is the number of full model of the laptop?

  39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Problem with connection for ePrint

  Hello
  
  Today, I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but I have a problem with ePrint.
  In practice, the printer is connected to my wifi at home and I can print without USB cable with no problems. But when I want the ePrint of installation function, I get an error that the printer do not have any internet connection and I can't complete the configuration of the service.
  
  Do anyone know how I can eliminate the problem?
  
  Thank you
  Denis

  Hi DenyKr,

  I see that you are having problems with your printer, connecting to web services.  I would like to try the following steps.

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds, then try again.

  Let me know how it goes.

• I have a problem with connecting to Skype, get error code 1001 on my event viewer

  I have the latest version of Skype installed and have not been able to connect. I had Skype for over a year and my computer has developed a problem with a memory stick and after that I came back from the repair shop, it didn't work. They had removed Skype from my system so I reinstalled and cannot connect.

  And this is related to the Windows XP files, folders and search for how?

  Ask here:

  SKYPE FORUMS:
  http://Forum.Skype.com/

• Strange problem with connectivity

  I had this problem with one of my computers I'm trying to connect to my router ea6500. I have several wired devices and wireless but who are working very well, the router gives me the questions recently and I had to get back to the form of the plant. Once I had setup the configuration again, one of my computers which had run fine before has an interesting question.

  The computer appears in my router with it's normal internal IP address. And my computer is saying that it is correctly connected to the internet. The question? It is not. All my other computers and devices are excellent connections without interruption of service whatsoever. No idea what could cause this kind of problem?

  After crossing, my pilots had messed up a stored parameter which was preserved through updates to pilot. I had to uninstall and reinstall the driver for my machine to fix manually Ethernet controller.

• Pavilion dv4-2170-us has problem with connection light display

  The cover on my laptop seems to have a bad connection, because I have to play with the angle to get the screen to

  show anything.  Sound very, very delicate.

  Is this something that can be fixed by a tech or should I get a new laptop?  I'm asking because there is another nother

  problem with function of my computer.

  HI @compugirl ,

  I understand this thing you display may have a bad connection that you have to play with, then fish on the screen to show the line.

  Want to know if this could be fixed by a tech.  The short answer is Yes.  Here is a link to 2009decembre 17 December 17, 2009 HP Pavilion dv4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3 page 3 for a list of the replacement screens supported by number of the part.

  It may just be a connections loose as you said, either a bad connection cable...  The cable may have become defective through the opening and closing of notebook, during normal use.  Please note Chapter 4 page 27 for the removal of the screen procedure.  Before considering the replacement of the screen, I would try a new cable first to exclude it.  You should be able to buy the cable to any computer supply store.

  I hope this has helped.

• problem with my Gigabyte Realtek RTL8168/8111 PCI - E

  Hi, my name is Louis and I'm having a problem with my internet connection. I install a new OS and the laptop does not recognize any wireless network. The thing is I could not turn blue light internet on my laptop, btw, I have a HP dv6. I tried to download the driver on the Publisher's site and installed. Once everything is done, they say that the computer does not have the card installed and configured wireless network.

  Hello

  ·        What drivers did you downloaded/installed on your system (wireless drivers or the drivers for realtek ethernet)?

  I suggest you to download the drivers from the card wireless appropriate from the link given below, you can select either (broadcom or Intel Pro) .

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3858830#n548

  Alsomake sure the wireless switch on the laptop isYOU.

  It will be useful. Please let us know to get help.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems with connecting by Modem DSL Siemens SpeedStream 4100.

  I have a little problem with my modem. I have a strange situation in which my internet goes several times a day (about 50-200 a day / every 10-15 min). I can't find the answer as to why this happens, however I noticed that whenever I get a phone call, my internet will. So that I get my signal back I have to make a phone call, so I just call my house to get a busy tone. My internet will come back without a doubt, but I don't think it's fair to make this happen. What could be the reason for these problems and how I could fix them? I have a PPPoE Setup so I am connected through a router, however, this problem happened a long time ago (I don't remember if it is since I have the modem). I'm in a laptop, but the question that's happened since a direct link between the modem and my desktop via cable Ethernet.

  Its been years and I have still not found a reason as why it happens. I know several people who have the same problems as me, and I would like to have days when my internet doesn't go away every 10-20 minutes. Any suggestions why this is happening or how to fix?

  Thanks, best regards

  Paul Zapata

  http://en.kioskea.NET/forum/affich-19259-router-disconects-when-phone-gets-used

  Read the above.

  Do you use a junction box on the phone, including extensions of each phone?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here are the General news when Internet is de-energized;

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with connecting to Windows normally

  OK, so I'm having a problem with a record in my laptop normally and the only way I can get to it is by going to safe mode.

  Basically what happens is that whenever I try to connect my computer normally (not in safe mode) I'll type in my password press enter it will come with the welcome sign and this small circle that tells it to load but it never is as if this drive does not work because the lamp flashes not or anything like that. However, it is very well whenever I login in safe mode and that the laptop came with windows vista on it that I don't have a copy of windows vista to try and slove the problem. This problem acerd after I restarted my laptop because it was slow and contributing generally to make it work properly again, but now this has happened and I don't know what to do.

  If someone could help me? I really need my laptop back to normal because right now, it's my only access to internet that not working I really on heavly for my college.

  Thank you for taking the time to read this and thanks for teying to help me.

  Hi Lexiey,

  A. recent changes made on your computer?

  B. you get any error message?

  You can start in safe mode, and then you put a computer to boot and then restart the computer in normal mode controls whether the issue persits.

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer in normal mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode. Uninstall or update the program that is causing the problem.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Problem with connecting to Essbase

  Hello

  We have recently updated to 11.1.2.4

  Since that time we see some questions intermittently while trying to connect.

  We use a user admin native directory connect you to MAXL to run scripts. This keeps failing in between and then if we're going to restart the job, it runs without any problems.

  We have checked through the SharedServices_Security_Client.log and found that, around the same time of the failure, there are a few mistakes here.

  Construction of the cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  Has failed to unify the Group cache. NULL. Refer to the log file security of the Shared Services for more details.

  
  

  Does anyone has any ideas on this.

  Do you think that the problem is related to the connection attempt to time to "unify the cache?

  I think that we have a framework to refresh Group cache every 60 minutes. is it a good idea to change that at one time in a day interval

  Thank you.

  Tom Thomas

  Usually it is not a problem with Aboriginal groups unless there is a huge amount, CSS JVM info is on https://blogs.oracle.com/pa/entry/epm_11_1_2_how1

• problem with connecting to the service of the administration of essbase

  Hi guys,.

  I have a problem with connectingto essbase administration service using the regional service console.

  There is no place of change taken on the essbase server.

  in the regional service console, clicking the server management component, I can find the essbase administration service is not running.but that will well essbase studio

  My essbase cube is used to be the source of OBIEE data. Now, I can not connect to the service of the administration of essbase, but the POET can read data in the essbase cube.

  Someone at - there experience this problem?

  any suggestion is appreciated!

  Hello

  Try restarting the Service of Directors.

  Kind regards

  Manan Shah

• Problem with connecting to the DB

  Hello world
  
  I try to configure DB Oracle 11g network for duplication of the DB and respectively for DATA GUARD and I face the problem with the network of the DB. I can't realize the basic problem. The problem is that after I connect to the DB with the name of the network service, I can't do anything. I get ORA-01034: ORACLE is not available
  Please help me solve this problem. I already do several times in 11.2.0.3.0 without any problem. :(
  
  Oracle DB 11.2.0.1.0
  OEL OS 5.7
  
  env

  [oracle@occ ~]$ echo $ORACLE_SID
  ROCKS
  [oracle@occ ~]$ echo $ORACLE_UNQNAME
  ROCKSU
  [oracle@occ ~]$

  init file
  

  [oracle@occ dbs]# cat /u01/app/oracle/product/11.2.0/db_1/dbs/ROCK.ora
  DB_NAME='ROCKS'

  startup mode

  SQL> startup nomount pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/ROCK.ora'

  Listener.ora

  [oracle@occ ~]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (GLOBAL_DBNAME = ROCKS.oracle.cloud)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
        (SID_NAME = ROCKS)
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = occ.oracle.cloud)(PORT = 1521))
      )
    )

  tnsnames.ora

  [oracle@occ ~]$ cat /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  
  ROCKS =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = occ.oracle.cloud)(PORT = 1521))
    (CONNECT_DATA =
       (SERVER = DEDICATED)
       (SERVICE_NAME = ROCKS.oracle.cloud)
       )
    )

  lsnrctl status

  [oracle@occ ~]$ lsnrctl status
  ................
  Service "ROCKS" has 1 instance(s).
    Instance "ROCKS", status BLOCKED, has 1 handler(s) for this service...
  Service "ROCKS.oracle.cloud" has 1 instance(s).
    Instance "ROCKS", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully
  [oracle@occ ~]$

  Local connection

  [oracle@occ ~]$ sqlplus / as sysdba
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  SQL> select status from v$instance;
  
  STATUS
  ------------
  STARTED
  
  SQL>

  Connection with the service name

  [oracle@occ ~]$ sqlplus  sys/engine@ROCKS as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Sat Apr 28 18:53:06 2012
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> select status from v$instance;
  select status from v$instance
  *
  ERROR at line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 0 Serial number: 0
  SQL>

  . / Thank you

  __OUTSIDER___ wrote:
  Can you please suggest me something on?

  RMAN-05535: WARNING: all the log files have not been defined properly.

  bcm@bcm-laptop:~$ oerr rman 5535
  5535, 3, "WARNING: All redo log files were not defined properly."
  // *Cause: It was not possible to define all the redo log files.  This
  //         can occur when LOG_FILE_NAME_CONVERT initialization parameter is
  //         defined but fails to match all the names or causes names to be
  //         created that are not in valid directories.
  // *Action: Query the V$LOGFILE view to see what redo log files are defined
  //          after DUPLICATE has completed.  Use the
  //          ALTER DATABASE RENAME FILE SQL command to correctly
  //          name the existing redo log files.
  bcm@bcm-laptop:~$ 
  

• Problem with the new hardware wizard and PCI bridge PCI to PCI standard

  I have problems with VMware Fusion 2.0.2 on my MacBook Pro (Mac OS X 10.5.6).) The guest from Windows XP Pro (SP2) Found New Hardware Wizard keeps wanting to install a software for "PCI standard PCI to PCI bridge". I tried to do 'automatically' and "install from a specific location" using the Windows disk, the MacBook Pro and the Mac OS X disk. In each case, I get the message 'not succeeded the Windows Logo test'. If I click on "continue anyway" is seems to load pci.sys to C:\Windows\System32\drivers. I click 'Finish' in the last window but it begins the loop again and again and again. The virtual machine network adapter is set to NAT and everything seems to work fine, but I can't stop this annoyance. Any ideas?

  There are 32 of these devices.  How many times have you finished yet?