Problem with Essbase Integration adapter

Similar Questions

• HP ENVY23: PROBLEM WITH A WIRELESS ADAPTER

  Hello

  I BOUGHT THIS REFURBISHED DESKTOP PC. ITS BEEN WORKING REALLY WELL FOR PAST 1 YEAR, BUT SUDDENLY, NOW HE BEGAN TO HAVE PROBLEMS WITH A WIRELESS ADAPTER THAT IS RALINK ADAPTER. PROBLEM IS THAT ADAPTER WILL SUDDENLY STOP WORKING. SO I HAVE TO GO INTO THE DEVICES AND ADAPTER MANAGER DISABLE AND ENABLE FOR HER WORK ONCE AGAIN. SOMETIMES EVEN THAT DOESN'T WORK SO AFTER RESETTING THE ADAPTER, I HAVE TO TURN ON/OFF THE COMPUTER. I HAVE NO CLUE AS WHAT THAT CAUSES THIS PROBLEM. PLEASE IF ANYONE KNOWS HELP.

  Thank you

  AHMED

  P.S I JUST TRIED TO UPDATE MY WIRELESS ADAPTER DRIVER.IT ME SAID I HAVE ALREADY UPDATED DRIVER INSTALLED.

  Hi there @JUMRONI

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  I suggest to start by checking your system for malware, as follows:

  HP computers - solve and protection against viruses on your computer (Windows 8)
  Spyware, Adware and browser hijacking software

  If that fix it, you're done, otherwise, you should check these:

  Troubleshooting wireless network and Internet (Windows 8)
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  I would like to know if this works for you.

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• Problem with OpenManage integration for vCenter - OMSA status: update required

  Hello

  We have a problem with the configuration of OpenManage integration on a vSphere 5.5 U2 Cluster. We have deployed IMO for vCenter v 2.3.0 build 290 aircraft, and we have installed manually OMSA VIB v7.4.0.2 on our 5.5. U2 ESXi hosts.

  The question we face is respect for vSphere host - when we start the Wizard "Fix Non compliant vSphere Host" it displays the correct version of the OMSA - 7.4.0.2 but OMSA status is "required update".

  Whe test us the connection to hosts using "Test the connection profile", it hangs at 0% and will be never finished.

  Also in the OpenManage integration in vSphere Client "Frimware" tab option is grayed out.

  Please indicate how we can make this work?

  Concerning

  Milan

  Well, I did some research more and found that ESXI 5.5 U1 and U2 don't are not supported by OMSA right now.

  FTP://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_virt_solutions/Dell-Mgmt-plugin-for-VMware-Center-2.3_Release%20Notes_en-us.PDF

  ESXi 5.5 U1 and U2 are supported only for the OMIVV on the servers of 12th and 13th generation who are capable of out-of-band management and require no OMSA must be installed on the host system. We intend to add a supported of the OMSA version at a later date.

  Thank you

• Problem with webcam integrated for Inspiron 15 3521

  Hi, I have a problem with the webcam on my Dell Inspiron 3521. Dell Webcam Central does not detect the webcam the webcam does not work. I checked in Device Manager > imaging devices and I saw the Webcam integrated, even if the icon is grayed out. I tried to update the driver software by right-clicking and selecting "update driver software".

  It's the State of the device:

  Currently, this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer.

  The webcam worked before in the past however over the last week, the webcam works sometimes and doesn't work after that I restarted my PC. A few days ago the webcam has stopped working completely.

  Cam_Huynh,

  Code 45

  Currently, this hardware device is not connected to the computer.

  Reconnect the device to your computer

  Recently install you / reinstall the operating system? If so, have you installed the Dell System Software (if applicable) and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct

  Windows 7/8 is supposed to provide the drivers of webcam for most Dell computers. If you system needs webcam drivers, go in driver downloads & enter your service tag, and then select your operating system. If your system is in need of drivers for the webcam, they will appear under entry.

  (Windows 8) How to make the webcam work with the help of this youtube. You must open the firstcamera app, and then click settings in the charm bar to see where you can give the app permission to use the webcam.

  Try to read...

  Troubleshoot the Dell Webcam and the Dell Webcam Central software

  You can try this file, also known as the Dell Webcam Central.

  Create a new unrestricted user account and try the webcam. The webcam worked?

  If Yes, sign out and sign back in to your account and try the webcam. The webcam worked?

  If not, then the webcam is detached from the motherboard, usually close to the webcam

  Rick

• Problem with Webcam integrated on portege series

  When I try to use the webcam, it comes up with the following error message:

  "Open Webcam driver fail. Please restart camera or computer. »

  I reinstalled the driver about 6 times, I uninstalled and tried to download at different Web sites. All have failed. The Camera Assistant Software does not open and no webcam or imaging device appears in Device Manager. I even tried to restore the laptop to factory settings and start again, but nothing helped.

  I'm completely stuck. Can someone please help?

  It's very strange. When you started your laptop for the first time have noticed some problems with the webcam feature?

  Usually after using the clean OS installation delivered support recovery, all should work well.

• Wireless - problem with the integration of MAC printing

  Hello world.

  Just bought a Macbook pro and can't seem to recognize my printer.

  Network devices:

  -Router Belkin WLAN

  -MFP HP Laserjet CM1312 - with HP 2101nw Wireless G (printing and scanning even works fine without thread!)

  -Acer laptop with XP Home (used to implement the 2101 wireless)

  -Acer Netbook with XP Home (later added to the network, no problem with printing, Setup a 5 min)

  Antivirus software: Avira Premium Security Suite on both XP

  Encryption WPA - PSK, mac filtering.

  The Macbook connect to internet, but nothing happens when I try to print. I tried to stop the argument that Windows is sometimes initially. Frustrating experience with the Mac to date.

  Can anyone help?

  We have found the solution:

  The HP 2101 nw G wireless driver must be installed (we had to try the installation twice).

  There is no 10.6 driver available on the HP site, but we tried the driver available however and to operate. Printing works perfectly well, we have simply not tried scanning so far (I think that it won't work), but the first step is done.

  Would be nice if HP could not work on the drivers updated to 10.6.

• Problem with webcam integrated on notebook Aspire 5532

  I bought a laptop Acer Aspire 5532 and it is supposed to have a built-in webcam. However, I can't make it work! I tried to download the drivers on the acer for the "crystal eye webcam' site but when I sign on sites like"Skype"and you try to use the webcam, I get the message found"no device ".
  I am really frustrated and would like to know what the problem is, if I want to return the phone and get something else.

  Hi all

  Thanks for posting on the Microsoft answers Forum.

  If you have problems with a built-in webcam, it would be best to go back to the manufacturer for assistance.
  First of all, I would like to download all the current drivers that might be available for the Crystal Eye webcam.

  Acer Web site click here for support.
  They should be able to help you on the built-in hardware.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems with WiFi. Problems with the Wifi adapter driver.

  Hello

  I have a Dell Inspiron 3520 with original 8 Windows installed on it. Wireless settings worked fine until yesterday but anyway its no longer works. I don't see any WiFi option and no wireless networks are also getting detected. Although his active on the network and sharing Center.

  The details of the pilot are:

  Dell 1703 802.11b/g/n (2,4 GHz) Wireless

  The internet LAN connections are working properly. When I received a diagnosis of the wireless connection, he said that there could be a problem with the driver for the WiFi card. I also tried the system restore, but the problem persists.

  How can I sort this problem?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Re: Satellite A200 - problem with generic AC adapter

  I own an A200 running Windows 7; I got it for a few years and the battery had deteriorated to the point where it concluded that a small amount of current, so I ran on aware of virtually all the time. However the CAP at the end of the cord (where it connects to the computer) became gradually more flexible and more flexible to the point where I had to twist and turn and argue it so in order to get the power flowing into the computer. the other day it stopped working completely.

  I went out and bought a third party adapter ("Lite-On"); I'm in a foreign country, but the adapter has had the same type of plug and the same (same input range, same output voltage) characteristics of power like the broken adapter that came with the computer. When I plug in, all the power lights comes on and it seems to work perfectly. When I start the computer, however, sometimes I will get a screen that says "Windows could not start... possibly as a result of a loss of power ' despite all the LEDs remain solidly lit during startup." This happens only occasionally. What is happening at each time is that in a minute or if all the lights go out and the computer turns off instantly; the LED will light up and then back up again instantly. Sometimes this occurs during the boot process, and sometimes I am able to go as far as opening a session on Windows before his stop.

  Is someone can you please tell me what the problem might me?

  After reading your ad, I also believe that this issue has nothing to with AC power supply.
  There must be another reason for the off switch.

  In most cases, this behavior is typical of overheating. In short period of time material reach the level of critical and portable temperature simply shut down without any warning.
  You can do a little test: start your laptop computer and enter the BIOS settings. Leave it for a while and see if the same thing will happen again.

  As already wrote Akuma, try cleaning the cold air and the cooling rack.
  Problem is that block cooling grill and portable dust cannot be properly cooled.

• Problems with wireless USB adapter. Icon missing "Wireless network connection".

  I recently got a laptop HD malfunction cause me to start my PC from 2004. I bought a Belkin N150 Wireless USB adapter to connect to the internet connectivity. During the installation, I do not get a "Wireless network connection" icon I am running Windows XP SP3. I installed the same USB adapter on a computer running Windows XP SP2 and it works fine. I plugged it in my desktop PC and it just doesn't work! Even with my router disconnected I should still be able to see other networks WiFi available in the range (I live in a community of apartment) as he worked on the other computer it elsewhere too. I double checked the drivers, reboot the cable modem, so that appropriate services were activated and still no dice. I have read forums and I'm almost at the point of paying MS for technical support services, but it's really just my last step before I shell out money for professional help. Notice to lovers? =)

  Hello

  Well, at this point, you should make an executive decision.

  If you think that someone will take just guilt because it's comfortable, it is not going to happen.

  If a new card that is known to work does not work, then you can try to re - install Windows.

  One of the differences between computer enthusiasts and regular users is the availability of the material. I have a set of wireless router, network cards, etc. that are known to be good.

  The components are used for the sole purpose of trying them temporarily on the troubled computers to rule out hardware problems.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Problems with wireless WIFI adapter. DWA-130 | Windows 7

  Hello

  I did a post on this a few months back and it has been partially resolved; I tried to get my wireless to work on Windows 10 WIFI adapter and the people trying to help me as I discovered that 10 Windows does not have to support the device.

  Now, I have a new problem. I recently, and recently I mean today, reformatted for Windows 7 because I'm not a big fan of Windows 10 (which is not because of my WIFI adapter doesn't work do not, it is mainly because of all the glitches that come with Windows 10 because it is so new). Sort of, I tried to install my WIRELESS card on my Windows 7 Desktop, and everything I did (I honestly don't know) I can't make it work... And here, if possible, why...

  

  I think that the "unknown device" could be my adapter. If so, that would mean he has not installed correctly and therefore is not working right (or not at all, in this case).

  How can I remove from my device manager? I have already used "uninstall Device Driver", and he says it uninstalls, but once I update the list, he's back again, this time with no way to uninstall it - I have to reboot the machine and then the option will pop up but then if I refresh it, it'll be welcome back here - now, it will not disappear.

  My WIFI adapter is called "DWA-130" and the model number would be "DWA-130F1.

  Help would be very appreciated.

  The problem has been resolved.

  Thanks for any help, in the end, I copied files from disks on my desk (before copying them, I just tried to use the DISK itself), then I went in "Devices and printers" clicked on my device (the "802.11 n WLAN [DWA-130]"), then went to "Device properties" and "Update Driver". I went to my office through the teleprompter and then when I was in the files on the disc, I went into the folder "Setup" and you press 'OK', in which he finally started to install the necessary drivers and you read this, I use my wireless adapter to access my internet.

  One thing to note;

  Once it was installed, I went to the 'map settings' to connect to a preferred network, and some networks were visible. So I had to add mine in manually, once I added it manually, the WIFI indicator on my taskbar, when I opened it, all the other networks in my neighborhood was now visible as well.

  I hope I helped someone with problems.

• LMS 2.6 with IPM 2.6 ACS 4.1, problem with IPM integration

  Hello

  Recently, I joined ACS 4.1 with LMS 2.6 follow this document:

  http://www.Cisco.com/en/us/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html

  The integration has been a partial success, because after the integration, I can not run client IPM and reports. Only I do not have the icon to start than this offer.

  Some of you know why happened, and if there is a solution?

  In agreement with the above document, I check the integration and was all like this doc. But IPM give me this problem.

  Thank you very much.

  Best regards Antonello.

  Do you see options for IPM GBA under the shared profile components?

• Windows 8 problem with wireless network adapter

  I had a lot of trouble to stay connected to the internet with my college wireless network on

  my laptop Windows 8. Especially when my computer is endearing to load a large number of data, the connection becomes limited and stops working. I use the resolution of problems and there's always the wireless adapter, which always solve the problem. This problem will not occur on the unsecured network comments from school or home. I tried many solutions to solve the problem, as going to tab the wireless one adapter power management uncheck allow the computer to turn off this device to save power. nothing has worked so far. Here are the details of the detection of the troubleshooter from the last time that this problem occurred:

  Details about network adapter diagnosis: Network adapter Wi-Fi driver information: Description . . . . . . . . . . : Dell Wireless 1704 802.11b/g/n (2.4GHz) Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Broadcom Version . . . . . . . . . . . : 6.30.59.74 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem51.inf Inf File Date . . . . . . . . . : Monday, September 17, 2012 6:52:18 PM Section Name . . . . . . . . . : BCM1704HMD_NT62 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4365&subsys_00161028 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0 IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Connection incident diagnosed Auto Configuration ID: 1 Connection ID: 1 Connection status summary Connection started at: 2015-03-08 14:48:33-522 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success List of visible access point(s): 7 item(s) total, 7 item(s) displayed BSSID BSS Type PHY Signal(dB) Chnl/freq SSID ------------------------------------------------------------------------- 28-8A-1C-FE-CA-80 Infra -91 1 smcm-guest 28-8A-1C-FE-0D-80 Infra -50 1 smcm-guest 28-8A-1C-FE-0D-82 Infra -54 1 resnet 28-8A-1C-FE-B5-C0 Infra -48 6 smcm-guest 28-8A-1C-FE-B5-C2 Infra -47 6 resnet 28-8A-1C-FE-3F-40 Infra -91 6 smcm-guest 28-8A-1C-FE-3F-42 Infra -88 6 resnet Connection History Information for Auto Configuration ID 1 List of visible networks: 2 item(s) total, 2 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID ------------------------------------------------------------------------------ Infra No 87 Yes smcm-guest Infra Yes 87 Yes resnet List of preferred networks: 5 item(s) Profile: mobilenet SSID: mobilenet SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: NETGEAR30 SSID: NETGEAR30 SSID length: 9 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Yeager Network SSID: Yeager Network SSID length: 14 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: smcm-guest SSID: smcm-guest SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Information for Connection ID 1 Connection started at: 2015-03-08 14:48:33-522 Auto Configuration ID: 1 Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 28-8a-1c-fe-b5-c2 Security and Authentication Configured security type: WPA2-802.1X Configured encryption type: CCMP(AES) 802.1X protocol: Yes Authentication mode: User only EAP type: Authentication not started Number of 802.1X restarts: 0 Number of 802.1X failures: 0 802.1X status: Success Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 13 Number of security packets sent: 13 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 400791 Ndis Tx: 204956 Unicast decrypt success: 0 Multicast decrypt success: 0 Unicast decrypt failure: 0 Multicast decrypt failure: 0 Rx success: 1632 Rx failure: 846 Tx success: 240 Tx failure: 0 Tx retry: 24 Tx multiple retry: 12 Tx max lifetime exceeded: 0 Tx ACK failure: 60 Roaming history: 0 item(s)

  Diagnostic information (wireless connectivity)

  Details about wireless connectivity diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Auto Configuration Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Result of diagnosis: There may be problem

  Diagnostic information (wireless network adapter)

  Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event. Helper Class: Native WiFi MSM Initialize status: Success Information for connection being diagnosed Interface GUID: 81887e6c-9ddc-413d-be6a-4465ad36cf87 Interface name: Dell Wireless 1704 802.11b/g/n (2.4GHz) Interface type: Native WiFi Profile: resnet SSID: resnet SSID length: 6 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: Yes Result of diagnosis: There may be problem

  Thanks for any help! It happened for about eight months and it's really frustrating.

  Hello

  Check with Dell and Broadcom, their documentation diagnostics online and drivers.
  and ask questions in the forums about known problems. The two Dell driver update, then
  Broadcom if there is more recent.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/
  Broadcom - downloads and Customer Support
  http://www.Broadcom.com/support/

  ==============================

  More troubleshooting:

  It is possible that the drivers you use, even if later now available, are not
  100% Windows compatible 8.1. Check with the manufacturer of your system (motherboard support
  Manufacturer of custom systems) and/or the manufacturer of the device. This one, like Intel,
  RealTek, Atheros and others may have newer versions is not available to the mother of system
  -site of the manufacturer on board. And continue to check in with them regularly over the next year.
  Also update the BIOS, drivers from the chipset of low level and major embedded and separate
  device drivers.

  Download your applications and devices in Windows 8.1
  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  =========================================================

  Don't forget to check the updates of the firmware on the router, because who can have a definite effect
  on connections Windows 8.1 same if other OS systems connections are fine.

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) and/or
  the manufacturer of real device driver updates. If there is no newer versions re - install the same
  ones. Ask known in their forums (if any) problems.

  ===================================

  General resolution: (after the above if necessary)

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  The adapter in Microsoft Windows 8/8.1 network problems - how to fix? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8/8.1 - material
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8/8.1 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8/8.1 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8/8.1 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">