Problem with fluidifica / thin

Similar Questions

• Update to Windows 8.1 causing problems with S7-392

  Since the upgrade to Windows 8.1, I have experienced frustrating problems with my S7-392.

  At this point the two main issues are:

  1. when running on battery, it stops intermittently.  Happens if I am using or not.  I've fiddled with the power such as disabling sleep options, etc.

  2. when waking from sleep or stand-by (don't know what mode it is in), by opening the cover, I'll see the announcement of logo sceen Acer will start "from auto repair.   Then it goes to a screen where it is said he couldn't fix it, and I want to restart or go to Advanced Options.

  I have updated all drivers and BIOS the newer versions which were released on 10/13.

  At this point, I feel like I want to go back to the original settings.

  Someone else is having these problems after updatig?

  I had exactly the same symptoms (if no Windows 8.1 upgrade was) this is the message that seems to have solved my problem:

  https://community.Acer.com/T5/ultra-thin/Acer-Aspire-S7-391-9413-keeps-shutting-down-randomly-while-...

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• My problem with Google Chrome

  Hello

  I use the latest version of the Google Chrome browser on my Windows 7 computer. The problem is that chrome is very slow in the first round. It takes more than 20 seconds to finally load the page (any page, say Google.com). Please consider these cases:

  1 - only my Google chrome is that way. My 11 of IE and Mozilla Firefox are thin and very fast in the first inning.
  2. I uninstalled and reinstalled times that the chrome by method of default uninstallation by Revo Uninstaller Pro to advanced mode, but no change has taken place.
  3 - I have the same version of chrome on my Windows 8.1 (which is on the virtual machine installed on Windows 7). It has no bugs and is very well in the first round and later.

  These cases involve the problem has to do with my Windows 7 operating system.
  What ideas do you have to get rid of this problem with Chrome please?

  I post in a forum of Chrome for assistance or try here

  https://support.Google.com/chrome/?hl=en#topic=3227046

• Two problems with the registry and Aero

  1. so I just follow the instructions on the Microsoft page at http://support.microsoft.com/kb/947215 on how to fix the error "the user profile service has no logon. I executer run in Safe Mode, follow the instructions in method 1, reboot and it worked again. After that things return to normal, I open the directory in the registry editor to see if anything changes. And Yes, because when I start Safe Mode and open the registry editor, I don't see that a file ends with .bak, however there are two. Is this a problem?

  
  2 I do not know if this has happened recently or a while back on my computer (the one with the same problem above), since I just noticed it. Usually on my other laptops, all the windows around is a 'border' like this:
  
  But some of the windows now appear when, will be absent this "frontier". Here are some examples:
      
    
  The above image (the stop a job), a border. But it is thin, and on the left side, there is more of a 'border' as the right and down side.
  

  I don't know what happened, but is there a way to solve this problem, because it does not concern normal like other computers?

  Thanks for any help.

  1. as long as you don't face any problems with the registration on your account, it is not a problem.

  2. Please run Microsoft Fixit from the following links and:
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/en-us
  If the problem persists, answer here.

• Problem with the registration of a Microsoft Publisher Document

  I encountered a problem with save a Microsoft Publisher document in PDF format.  I built the file with color photographs and then recorded then I changed inside page photography photographs black and white and registered with the designation of BW in the title.  I have the file in two forms: one is full color, and the second is a combination of color and black and white.  When I save the file with the black and white photos inside as a PDF, it saves as color.  No matter what I do, they keep coming to the top of color.

  I spent more than an hour in a meeting with Microsoft Technical Support, and pointed towards Adobe as having the problem.

  The file with photographs n & B are sent to an external commercial printer.  We cannot do printing in full color, and when they print the color and b & w, they look terrible.

  So he comes to solve the problem with saving the file in PDF format.

  Can you help me?

  I thinI think that your problem was caused by an update. Not Adobe software, not Windows, but for the Publisher. Logical, since the Publisher deploys the file. Here is a discussion Community of Microsoft . Best of all, Microsoft have a new fix for this, apparently. Make sure you know how to check the version of Publisher you run and decide if you want the automatic updates to it.

• Problem with animation line flicker/aliasing

  Hi I was wondering if anyone had any suggestions on trying to get this smoother animation and a little crisper.

  I know that the quality will be slightly less good in a gif format.

  https://S3.amazonaws.com/uploads.hipchat.com/115279/3089179/b6GFClDGSBHAucu/lines.gif

  Thank you

  Let me give you a few basics. These are things that are not considered by almost everyone that starts working in the video, especially those who come from a print or web design background. Photographers are also victims of a flaw in their knowledge which is understandable because they have never had to deal with things like this before. Here are the facts.

  First Point:
  Video (and everything that comes from digital displays) are always arranged on a grid of pixels. No exception. You can never put a line width of single pixel on this grid of pixels and do appear as a single pixel line, unless it lines up perfectly. Nothing that is not precisely aligned to the pixel grid is interpreted. It is called Anti-aliasing. This means that if your 1-pixel thick line is to halfway between grid display will be the average of the values in this row and you end up with a broad line of two pixels on the screen with each line taking half the value of the color of the original line. In other words if you are not precisely aligned on the grid of your 1-pixel wide black line becomes a 2px wide gray line.

  Second Point:
  Video is composed of images that reading at a particular rate. Your screen also has a refresh rate. Display rate standard in countries that have 60 Hz electricity usually have a refresh rate standard 60 Hz or multiples of a whole number of this rate divider. In countries where electricity is 50 Hz (Europe), the refresh rate is usually 50 Hz. The video frame rate for video in NTSC countries (most of the world) are normalized to 29.97 FPS (there's a reason associated with the problem of broadcasting TV signals in color, but I won't go into that right now). The Standard in PAL countries video frame rate is 25 fps. When you choose a frame rate for your video project which is not the frequency of standard images for your area, you may rate for your video come into conflict with the cadence of your screen. This can cause perfectly smooth motion judder and there is nothing you can do about it, except change the refresh rate of your screen or lift it up with a new high refresh rate capable display or change the frame rate of your video.

  Third Point:

  The average human eye and brain have a property called retinal retention. These effects how we perceive motion. No matter what you do, most people perceive incorrectly flexible movement across their field of vision. Most of the time the brain tries to iron out things and your eyes automatically try and follow this movement. This effect is well understood by the great directors when they block shots and the great directors of photography when they put cameras if your eye is directed to the part of the frame where they want that to get you to understand the history.

  Fourth Point:
  There is a strobe effect that applies to all the movements. For example, if you watch an old movie on TV western, you will sometimes see the wheels of the car rotate backwards. Smart of an airplane propeller video phone can show you that strange Sword-shaped blades turn slowly or even backwards. It's the interaction between pace and movement. The only way to create videos that shows the movement correctly and in the right direction is to match the query of the cadence.

  Fifth Point:
  Work around the fine lines, turning it into a thicker lines is to disable interpolation. You can do in After Effects by selecting quality draft. With quality lit project, you will always have a thick black line of single pixel. This solves a problem, but worse the other. The problem of the stroboscopic effect. To make your single pixel with black line SOUPLESE you must match the query of the line to the frame rate. You move 1 pixel by image or 2 pixels per image or 3 pixels per image or 4. You cannot move to 1.4 or 2.8 pixels per image. It won't wok, it would never work.

  Sixth Point:
  Even if you perfectly fit the pixel grid movement, you can still run on the retinal retention problem and frame rates. Every Director of professional photography with a value of his day rate knows that there are critical speeds of Pan - speeds during which you can not move the camera in a scene and offer a scene that doesn't pan and look terrible. Jerking can be so bad that it gives people headaches and worse. The frequency of images the more cautious, be with the camera. When the video cameras of 24 frames per second were introduced a whole bunch of people came back with horrible images. Shots that run at 29.97 work at 24. Cadence, retention of the retina, strobe effect and your brain combined with no fixed focal point for your eyes to focus on and track combine to fault up to the shooting and of the query.

  The solution:
  When you want to animate a thin line, you're better off at 29.97 frames per second that anything slower. 30 is OK if you go never broadcast or DVD to watch on a TV. You can use an expression to control the movement, so that your line moves exactly an even number of pixels per image. If your design requires that go you faster you must hide the problem with motion blur. If you want to lighten in and clear it of movement then you must hide the problem of aliasing with motion blur. Smooth long moves must be exactly to an even number of pixels per image. You have more options of speed at a higher speed. Even at a higher speed, you will encounter the problem of the sixth Point.

  The evidence:
  Any problem of smoothing by giving you the discount gray lines load the rendering of your lines animated in AE and step as part of an animation at the same time. Baring any cache image and to make the issues I bet that your animation will run without difficulty from one image to the other. It is only when the video plays back at speed that your eyes and your brain will tell you that the movement is uneven.

  Certain standards:
  Go to a cinema and watch the end titles. It takes about 7 or 8 seconds (depending on the height of the frame) for securities to roll from the bottom of the screen upwards. The second seven rule is pretty standard. With 29.97 FPS 1 video per image pixel, 2 pixels per image and 4 pixels per image work well enough for most applications. When you find a speed frame rate works for your video, it's the frame size and it is write it down. Use it again and again.

  This is an expression that works at the speed of the animation and allows blur to apply to your image. You can do the movement meet the markers if you want to start and stop. I have a bunch of preset animations that I use all the time for that style of animation.

  Bottom-up:

  t = time;

  en = t/thisComp.frameDuration;

  x = value [0];

  s = 4; Speed in pixels per image must be an integer

  y = value [1] - (fr * s);

  [x, y]

  Left to right:

  t = time;

  en = t/thisComp.frameDuration;

  y = value [1];

  s = 4; Speed in pixels per image must be an integer

  x = value [1] - (fr * s);

  [x, y]

  If you wish to reverse the direction, you can add a sign less in the final table or apply the term of anchor instead of position. These expressions take the initial starting position of the layer as a starting point. Both are moving to 4 pixels per image. To start and stop the movement, the simplest method is to split the layer, add the expression, let the layer move, then divide the layer again and delete the expression. If you are handy with expressions, you can bind the movement to layer markers, and then just move the markers for start and stop, or even reverse the direction of a single layer.

  If you don't want to mess with all those unbreakable rules then jack up motion blur and uses a higher cadence with thicker lines and hidden defects. There are no other solutions.

• Problems with the drive shrink and instant

  Hello

  I have a problem with shrink disc. I have a virtual machine with the five disc (all thin). In the tab of the vmware tools shrink the message that 'shrink is disabled for this machine. I checked the article in the link:
  http://www.VMware.com/support/WS5/doc/ws_disk_shrink.html
  and I think that all the conditions are correct for a fret on this virtual machine:
  1. the disc are a provisioning. I used vmkfstool to convert it to thin.
  2. the virtual machine has no snapshots.
  3. the virtual machine does not have the physical disks.
  4. I test with independent labels in persistent mode and no independent record. None of this works.
  5. the virtual disk is stored in a logical unit number.

  I would like to know what I should do to shrink disc. I have another question. The machine has five disks, each of them in a provisioning.  A disc is the maximum size, 2 TB. If I try to make a snapshot, you receive an error that the file size in the destination disk. The working directory of the virtual machine is in a store of data with 200 GB of free space. I would like to know if I need to store data from 2 TB to make the snapshot or just need to the fret to 2 TB - 16 GB (the overload limit comments in the article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1012384( )

  So, really I need a store of data with 2 TB of free space?

  It is not the free space on the disk that prevents you from taking a snapshot, it's the maximum possible size of the snapshot Delta. As this file, which contains data and metadata - could reach a size unsupported, VMware does not able to create such a file. If you want to be able to take pictures, the maximum size of the virtual disc service is 2 to less 16 GB (maximum size of metadata in the snapshot file) as mentioned in the article.

  André

• Problem with still exit

  I put together a DVD for a customer of marriage. Everything's going pretty good, except the output of my DVD files. Here are my parameters of output for all files:

  MPEG2-DVD

  Widescreen progressive

  Scale to fill

  Quality 100

  CBR = 9

  I have a problem when some of my files export with a thin line (it seems to be a green/red almost like there is an error in film as an old movie) in the video where a transition occurs. You don't see this line in Adobe Premiere, only in still and final DVD burning.

  The only thing I can reduce to, is that it seems the files which are nested where I used the multi cam edit. It only occurs during the operation of the "cross Dissovle". I just watched however, and it's affecting another file that I have that does not use the nested function.

  Is there a reason for this? I don't know exactly how to solve this problem. Problem is that it doesn't at all my video clips... only some. I already have DVD burner 2 and don't really want to lose more.

  Any help is appreciated.

  Well, I was able to fix it with a simple checkbox.

  Check "Get to maximum depth" and not the lines!

  Thanks for all the answers!

• Problem with audio in Cisco IP Communicator

  Hello

  I have a problem with the audio in a VMware View environment.

  I don't know if it's important, but my thin client is a model of WYSE X90LE, and I install the drivers for the USB (property WYSE) support. I use Logitech headset.

  When I connect to virtual desktop, I have a sound; but when I start Ip Communicator application I get the following error: "there is no compatible audio device installed on this computer. "Please click 'OK' to exit the"

  Anyone have this problem?

  Any suggestions?

  Best regards

  Pedro Velasco

  Tarragona, Spain

  You must purchase the TCX rich sound of WYSE. They have three licenses that are required for your virtual machine using Wyse terminals to work properly. Multimedia and USB also. $25 per license per device. You will need to upgrade license TCX, they give you in a MNOS. Ini FILE in your FTP server. I hate this cause that they announce that licenses TCX and an FTP server are needed until you call the problems you are having. I threatened to sue them for false advertising. Also reinstall the VMware tools in the virtual machine. Make sure you have the latest version of the software microsoft RDP. I think they are at 6.1.

• IE problem with spry lists when next to Flash element

  My Web site http://www.chamblissgiobbi.com/index.html has a problem with IE 7 & 8. On the pages of images where the Flash is used does not display the menu drop down. I read that the problem is that IE puts Flash on the upper level, regardless of what index Z, so that the drop-down list ends up being behind the flash. I tried a few bugs but still no luck.  Here is my code, and since I'm still new to this it might be something obvious I'm doing wrong. Any help would be greatly appreciated it.

  @charset "UTF-8";

  / * Sections - review: pre-release Spry 1.4 * /.

  / * Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */

  /*******************************************************************************

  The AVAILABLE INFORMATION: Describes the box model, positioning, the order

  *******************************************************************************/

  / * The outermost container for the menu bar, an area of width auto without margin or padding * /.
  UL. MenuBarHorizontal
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  cursor: default;
  do-family: Arial, Helvetica, without serif.
  background-color: #FFFFFF;
  Clear: both;
  float: left;
  make-weight: bolder;
  background-position: left Center.
  make-style: normal;
  do-variant: normal;
  color: #999999;
  text-align: center;
  }
  / * Value of the menu bar active with this class, currently the definition of z-index to accommodate IE rendering bugs: http://therealcrisp.xs4all.nl/Meuk/IE-zindexbug.html */
  UL. MenuBarActive
  {
  z-index: 1000;
  do-family: Arial, Helvetica, without serif.
  Color: #666666;
  make-weight: bolder;
  }
  / * Menu item containers, position of children relative to this container and are a fixed width * /.
  UL. MenuBarHorizontal li
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 100%;
  position: relative;
  text-align: center;
  cursor: pointer;
  Width: 121px;
  height: auto;
  float: left;
  do-family: Arial, Helvetica, without serif.
  background-image: none;
  Clear: none;
  height: 22px;
  make-style: normal;
  make-weight: bolder;
  do-variant: normal;
  color: #999999;
  }
  / * Submenus should appear under their parent (top: 0) with a higher z-index, but they are first the left side of the screen (-1000em) * /.
  UL. MenuBarHorizontal ul
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 100%;
  z index: 1020;
  cursor: default;
  Width: 66px;
  position: absolute;
  left:-1000em;
  background-image: none;
  make-weight: lighter;
  min-height: 22px;
  height: auto;
  Color: #FF0000;
  }
  / * Submenu that shows with the designation of the class MenuBarSubmenuVisible, we put the car left so it happens on the screen below its parent menu item * /.
  UL. MenuBarHorizontal ul. MenuBarSubmenuVisible
  {
  left: auto;
  do-family: Arial, Helvetica, without serif.
  Width: 7px;
  background-image: url (.. / images/web/navOVER_bkgrnd.jpg);
  list-style-image: none;
  make-weight: lighter;
  min-height: 24 PX.
  height: auto;
  Color: #FF0000;
  background-repeat: repeat-x;
  border-top-style: none;
  border-right-style: none;
  border-bottom-style: solid;
  border-left-style: none;
  border-bottom-width: 1px;
  border-bottom-color: #CCCCCC;
  }
  / * Container of menu items are same fixed width parent * /.
  UL. MenuBarHorizontal ul li
  {
  Width: 7th;
  make-weight: bolder;
  height: 24 PX.
  border-top-width: 0px;
  border-right-width: 0px;
  border-bottom-width: 1px;
  border-left-width: 0px;
  border-bottom-style: solid;
  border-bottom-color: #CCCCCC;
  border-right-color: #CCCCCC;
  border-bottom-color: #CCCCCC;
  border-left-color: #CCCCCC;
  Color: #FF0000;
  }
  / * Submenus should appear slightly overlapping to the right (95%) and upward (-5%) * /.
  UL. MenuBarHorizontal ul ul
  {
  position: absolute;
  margin:-5% 0 0 95%;
  do-family: Arial, Helvetica, without serif.
  make-weight: lighter;
  Color: #FF0000;
  }
  / * Submenu that shows with the designation of the class MenuBarSubmenuVisible, we have left to 0, it is on the screen * /.
  UL. MenuBarHorizontal ul. MenuBarSubmenuVisible ul. MenuBarSubmenuVisible
  {
  left: auto;
  top: 0;
  background-image: url (.. / images/web/navOVER_bkgrnd.jpg);
  do-family: Arial, Helvetica, without serif.
  make-weight: lighter;
  height: 26px;
  Width: 7px;
  background-repeat: repeat-x;
  Color: #FF0000;
  }

  /*******************************************************************************

  INFORMATION DESIGN: Describes the set of colors, borders, fonts

  *******************************************************************************/

  / * Submenu containers have borders on all sides * /.
  UL. MenuBarHorizontal ul
  {
  border: 1px solid #CCC;
  do-family: Arial, Helvetica, without serif.
  make-weight: lighter;
  Color: #FF0000;
  }
  / * Menu items are a light grey block with padding and no text decoration * /.
  UL. MenuBarHorizontal a
  {
  display: block;
  cursor: pointer;
  color: #999999;
  text-decoration: none;
  do-family: Arial, Helvetica, without serif.
  do-size: 100%;
  make-weight: bolder;
  background-image: none;
  background-repeat: no-repeat;
  background-color: #FFFFFF;
  Width: 106px;
  padding-top: 0.5em;
  padding-right: 0.75em;
  padding-bottom: 0.5em;
  padding-left: 0.75em;
  }
  / Components menu that have mouse over or focus have a blue background and white text * /.
  UL. MenuBarHorizontal a: hover, ul. MenuBarHorizontal a: focus
  {
  Color: #666666;
  do-family: Arial, Helvetica, without serif.
  make-weight: bolder;
  background-image: url (.. / images/web/navOVER_bkgrnd.jpg);
  background-repeat: repeat-x;
  do-size: 12px;
  border: thin dashed #999999;
  }
  / * Menu items that are opened with the submenus are on MenuBarItemHover with a blue background and white text * /.
  UL. MenuBarHorizontal a.MenuBarItemHover, ul. MenuBarHorizontal a.MenuBarItemSubmenuHover, ul. MenuBarHorizontal a.MenuBarSubmenuVisible
  {
  Color: #666666;
  do-family: Arial, Helvetica, without serif.
  do-size: 12px;
  make-weight: bolder;
  background-image: url (.. / images/web/navOVER_bkgrnd.jpg);
  background-repeat: repeat-x;
  border: 0px none #CCCCCC;
  }

  /*******************************************************************************

  Submenu INDICATION: styles if there is a submenu in a given category

  *******************************************************************************/

  / * Menu items that have a submenu have the MenuBarItemSubmenu class designation and are set to use a positioned background the far left (95%) and vertically centered image (50%) * /.
  SLH MenuBarHorizontal a.MenuBarItemSubmenu
  {
  background-image: none;
  background-repeat: no-repeat;
  background-position: 0 95%;
  border-bottom-color: #CCCCCC;
  border-right-color: #CCCCCC;
  border-bottom-color: #CCCCCC;
  border-left-color: #CCCCCC;
  color: #999999;
  do-family: Arial, Helvetica, without serif.
  make-weight: bolder;
  do-size: 12px;
  }
  / * Menu items that have a submenu have the MenuBarItemSubmenu class designation and are set to use a positioned background the far left (95%) and vertically centered image (50%) * /.
  MenuBarHorizontal ul a.MenuBarItemSubmenu SLH
  {
  background-image: url (.. / SpryAssets/SpryMenuBarRight.gif);
  background-repeat: no-repeat;
  background-position: 50 95%;
  Color: #FF0000;
  }
  / * Menu items that are opened with the submenus have the designation of the MenuBarItemSubmenuHover class and are set to use a background image "hover" positioned on the far left (95%) and centered vertically (50%) * /.
  SLH MenuBarHorizontal a.MenuBarItemSubmenuHover
  {
  background-image: url (.. / images/web/navOVER_bkgrnd.jpg);
  background-repeat: repeat-x;
  background-position: 111% 0%;
  border-bottom-width: 0px;
  border-bottom-style: none;
  border-top-width: 0px;
  border-right-width: 0px;
  border-left-width: 0px;
  border-top-style: none;
  border-right-style: none;
  border-left-style: none;
  color: #999999;
  }
  / * Menu items that are opened with the submenus have the designation of the MenuBarItemSubmenuHover class and are set to use a background image "hover" positioned on the far left (95%) and centered vertically (50%) * /.
  SLH MenuBarHorizontal ul a.MenuBarItemSubmenuHover
  {
  background-image: url (.. / SpryAssets/SpryMenuBarRightHover.gif);
  background-repeat: no-repeat;
  background-position: 95% 90%;
  border-bottom-width: 1px;
  border-bottom-style: solid;
  border-bottom-color: #CCCCCC;
  }

  /*******************************************************************************

  BROWSER HACKS: hacks below should not be changed, unless you are an expert

  *******************************************************************************/

  / * HACK FOR IE: to ensure that sub menus show above form controls, underpin us each submenu with an iframe * /.
  SLH MenuBarHorizontal iframe
  {
  position: absolute;
  z index: 1010;
  do-family: Arial, Helvetica, without serif.
  make-weight: bolder;
  color: #999999;
  }
  / * HACK FOR IE: to stabilize the appearance of the menu items. the slash in the float is to keep IE 5.0 analysis * /.
  @media screen, projection
  {
  MenuBarHorizontal li SLH. MenuBarItemIE
  {
  display: inline;
  f\loat: left;
  Background: #FFF;
  }
  }
  #wrapper #nav #MenuBar1 {}
  Clip: rect (auto, auto, auto, auto);
  Color: #FF0000;
  }

  You do not use the latest Spry files

  The latest version of the Adobe Spry 1.6.1 Framework it is the same version that ships with Dreamweaver CS4. If you are using Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can be easily done by using Updater Spry who can be found here.

  I think that your problem will be solved once you have updated.

  GRAMPS

• Problem with BLOB during the upgrade

  Hello
  I am doing an upgrade to version in bulk of WLS and Oracle (WLS 7 - > 10, Ora 8-> 10) and I have problems with BOLBs.
  
  While tryng to write a BLOB, I get the following exception:
  
  [August 27, 2008 18:22:26] [uts.actions.MyExceptionHandler] [ERROR] - java.rmi.RemoteException: EJB Exception:; nested exception is:
  java.rmi.RemoteException: captured SQL exception with cause: weblogic.jdbc.wrapper.Blob_weblogic_jdbc_base_BaseBlob; nested exception is:
  exceptions. DBException: Captured SQL exception with cause: weblogic.jdbc.wrapper.Blob_weblogic_jdbc_base_BaseBlob
  at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:491)
  at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:57)
  at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:427)
  at ejb.session.report.Report_i3i5qg_EOImpl.saveAttachmentDateNull(Report_i3i5qg_EOImpl.java:2617)
  at delegate.report.ReportDelegate.saveAttachmentDateNull(ReportDelegate.java:388)
  at struts.workflowinfragruppo.actions.OperazioneAutomaticaAction.saveAttachmentRicavi(OperazioneAutomaticaAction.java:194)
  at struts.workflowinfragruppo.actions.OperazioneAutomaticaAction.saveAttachment(OperazioneAutomaticaAction.java:130)
  at struts.workflowinfragruppo.actions.OperazioneAutomaticaAction.eseguiNo(OperazioneAutomaticaAction.java:112)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
  at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
  at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:226)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3392)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs (unknown Source)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
  Caused by: java.rmi.RemoteException: SQL exception caught with cause: weblogic.jdbc.wrapper.Blob_weblogic_jdbc_base_BaseBlob; nested exception is:
  exceptions. DBException: Captured SQL exception with cause: weblogic.jdbc.wrapper.Blob_weblogic_jdbc_base_BaseBlob
  at ejb.session.report.ReportBean.saveAttachmentDateNull(ReportBean.java:1612)
  at ejb.session.report.Report_i3i5qg_EOImpl.saveAttachmentDateNull(Report_i3i5qg_EOImpl.java:2603)
  ... 28 more
  Caused by: exceptions. DBException: Captured SQL exception with cause: weblogic.jdbc.wrapper.Blob_weblogic_jdbc_base_BaseBlob
  at dao.report.AllegaDAOImpl.saveAttachmentDateNull(AllegaDAOImpl.java:7712)
  at ejb.session.report.ReportBean.saveAttachmentDateNull(ReportBean.java:1609)
  ... more than 29
  
  
  
  I use a connection pool with weblogic.jdbcx.oracle.OracleDataSource as a pilot class.
  
  Any ideas?
  
  More info on request.
  
  Thank you
  
  Daniele

  OK, so rather than debug code, why don't you just
  go back to using the URL and the thin driver Oracle
  as before? That is the question. A Blob of the weblogic-
  driver of the brand is not the same as a blob of the
  Oracle thin driver. Your code is cast to an OracleThinBlob
  to access thin-driver-specific calls.

  Joe

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.