Problem with launch Pro 11

Similar Questions

• ICS issues with Launcher Pro +?

  Since my Razr has been updated to ICS, I struggled with Launcher Pro + working properly. It will force close, ask me if I want to use as default time and again, it will not download wigits, and it will run like quicksand. Sometimes it is fine (30%). More time for that, what I explained above.

  Almost ready to go to the use of the home interface.

  I did a full cache clear, but it did not help.

  I enjoy using LP + but not like that. He was a great pitcher before ICS and it is quite popular.

  Someone out there who knows how to solve this, please let me know.

  Thank you

  Eileen

  
  

• Problem with RAM Pro 4600 - Original RAM is not compatible!

  Hi, first sorry for my English.

  I ve had some problems with original module Toshiba PA3069U-M 256 MB of RAM for my Toshiba Satellite Pro 4600.

  History: (# = number of RAM)

  #1 was delivered to the original box from Toshiba and works in the slot A and B without any problem, but was damaged after only 2 weeks (!) --> Distributor sent me a new: #4

  #2 has been delieverd by the same distributor (same tine as #1), but only in the bag to shield static orginal. The laptop shows that the RAM is incompatible in the slot A and B--> I return

  #3 was delivered by another distributor, a few days after #1 was also damaged in the original Toshiba box. It still works fine in both slots.

  #4 was delivered yesterday, but only in the original static shield bag. The laptop shows that RAM is not compatible in both slots.

  The RAM in the box and the RAM that in static shield bag are two RAM Toshiba original from the manufacturing, seems to be quite the same. But still those in the area of work others are incompatible even after a BIOS update.

  Someone had the sampe problem or can help me?

  THX Braumeister

  Hello

  This seems very strange! The PA3069U-M 256 MB Ram Modules must adapt and work! So it may be that no work modules were damaged by sending by mail just packed in Toshiba box modules that work!

  Goodbye, TOK

• A30 - problem with intel pro Wireless 2200bg - wireless always turn off

  Hello.

  I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
  I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

  Thanks for any information

  Hello

  Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
  If this isn't the case, then there is something wrong.
  Did also attach you the antenna cables to the Wifi card?
  You use the Windows XP client or customer of Intel for wifi?

  BR

  Tom

• Series of HP DV7-3000 - Dv7-3085Dx - problems with launch of key wireless, fast

  I have some problems with my laptop HP Pavillion Dv7-3085Dx with Windows7.

  I had a problem with my quick launch buttons, none of them work... Mute, Play/Pause, Stop... and especially the wireless button...
  My biggest problem is the wireless button, because I'm not be able to turn it on...
  After a time there... I used it normally... but I got used to the Windows + X to enable and disable my wireless...

  But now I can't use my wireless sort!
  Windows + X: The button is disable.
  BIOS: There is no option to turn it on.
  Net Manager: the Drive of WiFI is accurate, up-to-date and there is no signal problems.

  I have already desisntall and install the newest drive, reinstall the Windows...
  and no result...

  @jcbrasileiro

  Hello

  Do a hard reset:
  1 disconnect all devices and remove all USB devices and multimedia cards.
  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
  3 reconnect the power adapter (do not connect the battery), press the power button.

  Verification is your problem is resolved or not.

• Problems with Premiere Pro CS6 and Media Encoder

  I have been using Media Encoder for months with Premiere Pro, but he has recently stopped working. It gets stuck trying to connect to the dynamic link and then fails.

  I tried to solve this problem for a while following the instructions online and I could have screwed up things. Is there a way to uninstall Premiere Pro and Media Encoder completely so I can reinstall them?

  I have a creative cloud subscription.

  First, select help > deactivate...

  Then just uninstall as usual.  After that, run the Script of cleaning of Adobe.  Restart and reinstall.

  https://www.Adobe.com/support/contact/cscleanertool.html

• Problem with Satellite Pro 4200 series USB (4270)

  Hello

  I'm having a problem with my usb port, it doesn't seem to work properly. I did an update of the Bios, which solves nothing. I changed the drivers (Windows 2000 Professional service pack 4) which did nothing either. Plug-and-play does not activate even when I plug something into the usb port. At first I thought that maybe the USB has been damaged, but when I plug my webcam, it lights up briefly, and since it is powered from the usb, I hope this means that the usb port still works. I tried to plug in scanner m, my printer and my camera, with all the different drivers, with which they came. Nothing works. Windows 2000 displays not all conflicts with all the drivers. I've also disabled in BIOS, all other ports (LPT1 COM1 COM2) using the IRQ11. What could be a solution to this problem?

  Hello

  Well, as far as know that the operating system is unable to recognize the devices if the external USB device needs more power than the USB port provides. In this case, the USB devices must have an external power supply.
  In addition, try to remove the USB port on the Device Manager and restart the operating system.
  After the restart of the operating system should recognize the USB ports. Maybe this procedure solves the strange USB problem.

  Please let me know if it works.

  Good bye

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...

• I had many problems with Adobe Pro CC...

  Greetings,

  First off I do let's plays on Youtube.  I use the saved game, face cam and audio (face cam and audio are recorded separately, web cam, then using Audacity with the microphone of the cam turns off).

  Question 1: most of the videos I've done here lately had synchronization problems.  Whenever I have 'trim' or cut the timeline to take coins to up the cam audio / face mismatch.  I'm always cut 5-14 frames of audio so that it can synchronize to the top.  I have to repeat this process several times throughout most of the projects now.

  
  Question 2: Audio during the manual move through the timeline.  I rely on this to hear "synchronization of Clap" so I know not if the cam audio / face is well aligned.  It stopped randomly a week ago.

  Question No. 3: the audio stops at random all by listening to the recording in Adobe first CC.

  Question 4: The video/audio for all randomly gets choppy when editing.  Also, it started about 2 weeks ago.

  
  Issue 5: Stream (seen during your editing) randomly empties in some sections of the sequence.  I have to reboot the first CC to be able to see it.

  Please note, when sync problems are fixed there are virtually no problems with the video once it's over.  However, all these problems collectively transform quick projects into nightmares of 2-3 hours.

  Help?

  Sync sounds like a problem of VFR... the video is VFR, and audio is NOT recorded VFR. Harley posted a few days that you can right-click on a clip and turn on interpolation, which corrects a good part of video problems... but... the audio synchronization could still be wobbly.

  Download MediaInfo, drag an item to the program, switch to the view of the tree and see what it says on your video stream... codec, CFR/VFR, that sort of thing.

  Media Info: https://mediaarea.net/en/MediaInfo

  Neil

• Strange intermittent problem with macbook pro

  Hey there ppl.

  So, I have a Macbook Pro (15-inch, mid-2014, retina), processor i7 2.2 GHz, 16 GB of memory. Running OS X El Capitan.

  My problem is a strange, because it is only intermittently. ID say like 10-15% of the time. But its very frustrating and annoying when it does and because I am working on my computer (poker), it's also costing me. in any case, the problem usually occurs after I've been using the computer for 1, 5-3 hours or more. Usually ill be playing poker online, listen to spotify and use of the internet for stuff randomly. Everything will be fine and then suddenly ill notice that my mouse cursor will be suddenly shot through the screen occasionally. as ill be goes well with the cursor but it'll jump to the left, a couple of inches or more. Also bad note that some of my habit of 'clicks' record, so ill use the calculator for example and badly want to press 543 and maybe 5 records, but when I go to click on the 4 it does not work, and ill have to like wait a second, then click New to register the click.

  Also, if im typing something, as in poker, I have sometimes to take note of the way in which an opponent has played a helping hand or whatever, a letter or a space press custom register, so ill be typing a phrase and the space bar is and I'll have to press the key once the couple , then a letter will not register, etc.. Sound very disorienting and made it difficult to continue the task IM because it does not smoothly because of the LAG, unregistered, mouse jumping, etc.

  IM really not sure of what the root of the problem and what it is. Ive has run the malware anti-malware bytes, but that has not solved the problem. Usually when that happens ill try to restart the computer, or stop and return back but generally the problem persists. Then, after some time, maybe 20 to 45 minutes or so, when I try to use the computer it works normally with any of these problems.

  Very bizzare. Any help or insight is appreciated, let me know if you need more information

  Brandon

  Good afternoon brandonfrommililani,.

  Thanks for letting us know about the problem you are having with your cursor jumps erratically on the screen of your MacBook Pro.  The resources below provides some initial troubleshooting steps, you can try at this address.  I suppose that you work with the trackpad on your MacBook Pro.  In addition to the steps suggested below, try to connect a wired mouse to your computer to exclude Wireless interference.

  If your pointer is nervous when you use a trackpad, Magic Mouse or Magic Trackpad

  Best,

• U2414H - problem with Surface Pro 3

  This has been a constant problem. We have a number of these monitors and we have a user with a Surface Pro 3 problems where every few weeks or so, one of his monitors will stop running.  Usually after swapping the monitor with another, he will work for a few weeks and then stops again.  The user has a docking station of Surface that we had originally two monitors connected in Garland for the DisplayPort. The user wants to add a third U2414H, but we could never that daisy chain on the other.  The user has added a diamond USB adapter which used DisplayLink and we had three monitors working.  Now, this week he came in and one of the monitors connected DisplayPort adapter does not work.  All three are U2414H and we exchanged out them with other U2414H monitors we have in our office to try to make them work.  Are there rules that we must follow to prevent them to stop constantly working with the surface?  Is this a problem of windows 8?  Thank you.

  Apology. I just see this answer. You did it ensure 1.2 DP was off when you have tested the underside of short term solution?

  Problem =
  * When the SP3 is anchored and double are connected using DisplayPort multistreaming (daisy chain), one or two screens will not be recognized after restart or power cycling the SP3. In both cases, the resulting no video appearing on external displays.
  * Some displays will expose rip video on the secondary display, what installation using DisplayPort multistreaming (daisy chain).
  * A view not to return to video mode displayed after recovering from power save mode.

  Workaround short term =
  SP3 Dock CDM on--> Dell mDP to DP cable--> #1 off DP (DP 1.2) monitor
  CDM SP3 on--> Dell mDP to DP cable--> #2 off DP (DP 1.2) monitor

  Long term = solution
  Microsoft is aware of the issue with their dock. They are developing a dongle special connector to the dock that works with the process of formation of link to boost the signal strength has negotiated with external monitors. As to when this will be available in September. Note the dongle won't be available in stores. You should open a case with Microsoft and show them that the problem occurs when you connect directly to the dock AMD and using double monitors in a DP 1.2 Garland of STD. They will then send you the dongle. I've heard other customers of this front line support Microsoft has not yet heard this dongle. Then wait until September to contact them.

• There is no any library problem with launch

  Hello

  I don't have fed up with this launch error does not have any library.

  Whenever I do any application with C++, I get this error. I restart the software and system, but the problem is not resolved.

  Can anyone know why its happening? Is there a solution for this problem?

  Its urgent...

  Thanks in advance...

  C:\bbndk\host_10_1_0_132\win32\x86\usr\bin\ntoarm-ld: o.le-v7-g/.obj/StatusEvent.o: reference to undefined symbol '_ZN2bb23AbstractBpsEventHandlerC2Ev'

  It's your mistake.

  http://developer.BlackBerry.com/Cascades/reference/bb__abstractbpseventhandler.html

  You must link against - lbb, as mentioned in the post above.

  Aaron

• Problem with Treo Pro guard wake up

  My Treo Pro guard wake up without apparent reason.  I have no runing in the background apps, email is set to manual still it keeps waking up then cycles itself out as usual.  Still, I have 'x' all the apps off and he wakes up and cycles off.  This seems to be really draining the battery and is boring.  Any help would be greatly appreciated.

  Thanks IrreducibleM31 for the suggestion off cellualr radio.  This seems to be what's causing my Pro waking up again and again.  I turned it off for two hours and he did not wake up one time.  I turned on the radio cellualr and a few minutes to go to sleep, he awoke and continued to do almost every 10 to 15 minutes.

  Knowing the problem dosen't help because I need to have my phone on all day, so guessing it is not something I can do about it until someone comes up with a fix within the network.

• Problems with Premiere Pro CC 2014 H.264 encoding

  After update for first Pro CC 2014 yesterday, I see encoding artifacts on my H.264 exports.

  Same video source v7 and CC v2014 imported and exported using the parameters of the YouTube 1080 p 29.97 fps. Artifacts manifests itself in the form of softness/blur in some parts of the image every few seconds, particularly notice the area with a red circle below.

  

  Here's the source (GoPro HERO3 Black Edition), the rendering of the v2014 file and make it v7.

  Original: https://drive.google.com/file/d/0B2rJe0xgMTxFYXJiMjZpZ0stUzQ/edit?usp=sharing

  CC v2014 render: https://drive.google.com/file/d/0B2rJe0xgMTxFQ1B0Z09GS3I0a1E/edit?usp=sharing

  Get CC v7: Premiere Pro CC.mp4 - Google Drive

  [Version numbers fixed.]

  Post edited by: Jim Simon

  This problem is resolved in the update that was released today (2014.0.1, aka 8.0.1).

• Problems with Premiere Pro CS4: first use/installation

  I am a photographer. I have a Canon 1 d Mark IV, which takes HD video. I bought the Premiere Pro to edit video. It is installed without complaint. When it is called, it is VERY slow.  The first splash panel shows (purkle with "Pr"), but the long rectangle at the bottom is white without content.  After more time, the main window opens and then the boy in the window (to open a project, new project, help), but it does not display this content but is rather transparent right away to my paper painted (photo of my daughter).  If I take the small window and drag off screen and return the appropriate content then I can click on an option. From there everything is very slow and after each click, I have to drag the entire window off the screen, tap the screen to see the updated content.  If I import a .mov file I can go to play in the top left panel (I'm totally familiar with Pr at this point and excuse me for my lack of knowledge of the nomenclature) including reset at the beginning, etc.  But if I try to import more content via the bottom left panel, after every click of a choice of repertoire, I drag the window off the screen and come back to see the expanded choices.  This applies also to choose the codecs, frame rate and almost anything else.  It is, of course, unusable.

  I suspect it is a video card issue.  I am running Windows XP Pro on a core of two DuoCore 3.33 mHz with 4 GB of RAM and two Gigabyte 8800 GT cards and a relatively recent driver from the nVidia website. I have a RAID 1, RAID 0 and RAID 5 works disk system disk scratch to perhaps of 750 GB of free space. I run against viruses and malware as a software system for the defrag and registry mainenance maintenance, etc.  Most of the other Adobe products perform well including PS, Illustrator, Dreamweaver, etc..

  I don't know how to determine the cause of my problems.  I tried the Ko, but other than a few simple things, it is not very useful.  I hope that it is a well known symptom of something so if I missed it please just point me to what is necessary.

  On a side note, I will build a new i7 Win7 64 bit box this summer and would appreciate a pointer to where I can find the component builds that work well with Adobe Web Premium CS4 and Premiere Pro.

  How are your double vid-cards configured, SLI, Crossfire?

  The first thing I would do would be to get the latest driver for the nVidias.

  You're not sure if the blinds is available for Win 7, but you have? Update of the blinds has corrected similar problems.

  Good luck

  Hunt