Problem with Treo Pro guard wake up

Similar Questions

• Question of sending e-mail with Treo Pro

  I always have the same problem with T-Mobile by sending emails. I have all my settings correct and with incoming and outgoing servers (using T-Mobile) and I can only receive, not send them. I'm extremely frustrated with that by the way I think about the passage of carriers to Verizon and get rid of the phone. Don't get me wrong, I've always loved Palm and treo. I thought that if I got the unlocked version of the Pro, it would work just as my Treo 755 has no problem. The only thing really different between the Pro and the 755 is now that it is running Windows Mobile software vs of the Palm (and of course all the improvements). I really need help on this cause I am actually count the days here until I change provider and go BlackBerry. Someone keep me a person of Palm and help out me! Thank you!

  Have you deleted the email account and re-create it to see if you can e-mail?  Get the Cannot Connect to server error?

  Is a known issue with WinMo 6.1 on sending e-mails with some e-mail providers that a fix has been posted here:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d9d71b2e-d2dd-44F2-86e5-1e53aad7fb7a&displaylang=en

  This patch is not a ROM update, so each time a hard reset is done this patch will need to be reinstalled.

  Message edited by thetreoguy on 03/27/2009 18:40

• Problem with RAM Pro 4600 - Original RAM is not compatible!

  Hi, first sorry for my English.

  I ve had some problems with original module Toshiba PA3069U-M 256 MB of RAM for my Toshiba Satellite Pro 4600.

  History: (# = number of RAM)

  #1 was delivered to the original box from Toshiba and works in the slot A and B without any problem, but was damaged after only 2 weeks (!) --> Distributor sent me a new: #4

  #2 has been delieverd by the same distributor (same tine as #1), but only in the bag to shield static orginal. The laptop shows that the RAM is incompatible in the slot A and B--> I return

  #3 was delivered by another distributor, a few days after #1 was also damaged in the original Toshiba box. It still works fine in both slots.

  #4 was delivered yesterday, but only in the original static shield bag. The laptop shows that RAM is not compatible in both slots.

  The RAM in the box and the RAM that in static shield bag are two RAM Toshiba original from the manufacturing, seems to be quite the same. But still those in the area of work others are incompatible even after a BIOS update.

  Someone had the sampe problem or can help me?

  THX Braumeister

  Hello

  This seems very strange! The PA3069U-M 256 MB Ram Modules must adapt and work! So it may be that no work modules were damaged by sending by mail just packed in Toshiba box modules that work!

  Goodbye, TOK

• A30 - problem with intel pro Wireless 2200bg - wireless always turn off

  Hello.

  I have a problem with the wireless card Intel pci mini. I installed in the connector mini pci and connected the 2 wires. I also installed drivers and software to Intel. But the connection is always available. I changed the wireless switch located on the left side of my toshiba, but said software, the hardware radio switch is off.
  I reinstalled operaiting system XP Home, XP Pro, but all the time I have information that this switch is off.

  Thanks for any information

  Hello

  Please first check that when you the physical switch turn on wireless communication, you should also somewhere (probably near the switch) see an orange light.
  If this isn't the case, then there is something wrong.
  Did also attach you the antenna cables to the Wifi card?
  You use the Windows XP client or customer of Intel for wifi?

  BR

  Tom

• Problem with Treo 800w and 2008 Nissan Altima

  I can get my treo 800w for pairing with my 2008 Nissan Altima, he tells me again my battery and the singal strength, I can even answer the calls. But when I answer a call or make a call you can not hear the person at the other end, nor they can hear me. I know that this is not a problem with the car, because the other phones work very well. Please let me know if there is a fix for this or if it's something in the works.

  Thank you

  Rodrigo

  So I went to the dealership and they were basically looking at my like I'm a fool. They said that they could not do the update, because they have never heard of him. I went home and called Nissan Bluetooth support and they told me that I have to buy Navigation DVD 7.4 in order to get the update. The price is $ 299 at the dealer and $190 of navteq. So I asked the guy to support if I buy the drive on mine it will fix my problem, he said no because when you buy the merchant, they will check your system to make sure that it is compatible with the new dvd navigation and perform the updates. I think its crap they have simply not do the update with the charge me for a new navigation dvd. The tech support guy remind me and offered me a work-around to get bluetooth working on the car. This isn't the best solution, but it works. Basically, pair you the phone and make your call. When the call is in course/ringtone, click the button on the screen to switch to your device, that it will be set on your phone. Then click phone on the wheel button, and everything will work correctly. I tired it and it works. This leads me to believe it's a problem with Nissan and not WM, but I'm not an expert.

  Message is about: Treo 800w (Sprint)

• Problems with Premiere Pro CS6 and Media Encoder

  I have been using Media Encoder for months with Premiere Pro, but he has recently stopped working. It gets stuck trying to connect to the dynamic link and then fails.

  I tried to solve this problem for a while following the instructions online and I could have screwed up things. Is there a way to uninstall Premiere Pro and Media Encoder completely so I can reinstall them?

  I have a creative cloud subscription.

  First, select help > deactivate...

  Then just uninstall as usual.  After that, run the Script of cleaning of Adobe.  Restart and reinstall.

  https://www.Adobe.com/support/contact/cscleanertool.html

• Problem with Satellite Pro 4200 series USB (4270)

  Hello

  I'm having a problem with my usb port, it doesn't seem to work properly. I did an update of the Bios, which solves nothing. I changed the drivers (Windows 2000 Professional service pack 4) which did nothing either. Plug-and-play does not activate even when I plug something into the usb port. At first I thought that maybe the USB has been damaged, but when I plug my webcam, it lights up briefly, and since it is powered from the usb, I hope this means that the usb port still works. I tried to plug in scanner m, my printer and my camera, with all the different drivers, with which they came. Nothing works. Windows 2000 displays not all conflicts with all the drivers. I've also disabled in BIOS, all other ports (LPT1 COM1 COM2) using the IRQ11. What could be a solution to this problem?

  Hello

  Well, as far as know that the operating system is unable to recognize the devices if the external USB device needs more power than the USB port provides. In this case, the USB devices must have an external power supply.
  In addition, try to remove the USB port on the Device Manager and restart the operating system.
  After the restart of the operating system should recognize the USB ports. Maybe this procedure solves the strange USB problem.

  Please let me know if it works.

  Good bye

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• I had many problems with Adobe Pro CC...

  Greetings,

  First off I do let's plays on Youtube.  I use the saved game, face cam and audio (face cam and audio are recorded separately, web cam, then using Audacity with the microphone of the cam turns off).

  Question 1: most of the videos I've done here lately had synchronization problems.  Whenever I have 'trim' or cut the timeline to take coins to up the cam audio / face mismatch.  I'm always cut 5-14 frames of audio so that it can synchronize to the top.  I have to repeat this process several times throughout most of the projects now.

  
  Question 2: Audio during the manual move through the timeline.  I rely on this to hear "synchronization of Clap" so I know not if the cam audio / face is well aligned.  It stopped randomly a week ago.

  Question No. 3: the audio stops at random all by listening to the recording in Adobe first CC.

  Question 4: The video/audio for all randomly gets choppy when editing.  Also, it started about 2 weeks ago.

  
  Issue 5: Stream (seen during your editing) randomly empties in some sections of the sequence.  I have to reboot the first CC to be able to see it.

  Please note, when sync problems are fixed there are virtually no problems with the video once it's over.  However, all these problems collectively transform quick projects into nightmares of 2-3 hours.

  Help?

  Sync sounds like a problem of VFR... the video is VFR, and audio is NOT recorded VFR. Harley posted a few days that you can right-click on a clip and turn on interpolation, which corrects a good part of video problems... but... the audio synchronization could still be wobbly.

  Download MediaInfo, drag an item to the program, switch to the view of the tree and see what it says on your video stream... codec, CFR/VFR, that sort of thing.

  Media Info: https://mediaarea.net/en/MediaInfo

  Neil

• Problems syncing Treo Pro

  Hi all

  I use a Treo Pro. It was working fine until I started to notice that this is not synchronization of contacts and meeting requests. The contacts I don't know why some are synchronized and other. I tested a few tips as to delete a category of contacts or to check if the 10 first or 50 are synchronized or not... Always the same A to Z contacts are synchronized and those who don't is not synchronized is always the same. I did reset hard etc.

  On my appointmenst Outlook, it does not synchronize those who have two or more standards, such as conference bridges, etc. It syncs only the ones I create as reminders, not in meetings that others send me in my work.

  Any help or advice is welcome.

  I use Windowns Mobile 6.1, Treo Pro, Outlook 2003 and Windows XP.

  Thank you.

  You're sync'ing to all subfolders in Outlook?

  What version of Outlook are you using? Go to help - about the version.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Treo/T850/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Strange intermittent problem with macbook pro

  Hey there ppl.

  So, I have a Macbook Pro (15-inch, mid-2014, retina), processor i7 2.2 GHz, 16 GB of memory. Running OS X El Capitan.

  My problem is a strange, because it is only intermittently. ID say like 10-15% of the time. But its very frustrating and annoying when it does and because I am working on my computer (poker), it's also costing me. in any case, the problem usually occurs after I've been using the computer for 1, 5-3 hours or more. Usually ill be playing poker online, listen to spotify and use of the internet for stuff randomly. Everything will be fine and then suddenly ill notice that my mouse cursor will be suddenly shot through the screen occasionally. as ill be goes well with the cursor but it'll jump to the left, a couple of inches or more. Also bad note that some of my habit of 'clicks' record, so ill use the calculator for example and badly want to press 543 and maybe 5 records, but when I go to click on the 4 it does not work, and ill have to like wait a second, then click New to register the click.

  Also, if im typing something, as in poker, I have sometimes to take note of the way in which an opponent has played a helping hand or whatever, a letter or a space press custom register, so ill be typing a phrase and the space bar is and I'll have to press the key once the couple , then a letter will not register, etc.. Sound very disorienting and made it difficult to continue the task IM because it does not smoothly because of the LAG, unregistered, mouse jumping, etc.

  IM really not sure of what the root of the problem and what it is. Ive has run the malware anti-malware bytes, but that has not solved the problem. Usually when that happens ill try to restart the computer, or stop and return back but generally the problem persists. Then, after some time, maybe 20 to 45 minutes or so, when I try to use the computer it works normally with any of these problems.

  Very bizzare. Any help or insight is appreciated, let me know if you need more information

  Brandon

  Good afternoon brandonfrommililani,.

  Thanks for letting us know about the problem you are having with your cursor jumps erratically on the screen of your MacBook Pro.  The resources below provides some initial troubleshooting steps, you can try at this address.  I suppose that you work with the trackpad on your MacBook Pro.  In addition to the steps suggested below, try to connect a wired mouse to your computer to exclude Wireless interference.

  If your pointer is nervous when you use a trackpad, Magic Mouse or Magic Trackpad

  Best,

• U2414H - problem with Surface Pro 3

  This has been a constant problem. We have a number of these monitors and we have a user with a Surface Pro 3 problems where every few weeks or so, one of his monitors will stop running.  Usually after swapping the monitor with another, he will work for a few weeks and then stops again.  The user has a docking station of Surface that we had originally two monitors connected in Garland for the DisplayPort. The user wants to add a third U2414H, but we could never that daisy chain on the other.  The user has added a diamond USB adapter which used DisplayLink and we had three monitors working.  Now, this week he came in and one of the monitors connected DisplayPort adapter does not work.  All three are U2414H and we exchanged out them with other U2414H monitors we have in our office to try to make them work.  Are there rules that we must follow to prevent them to stop constantly working with the surface?  Is this a problem of windows 8?  Thank you.

  Apology. I just see this answer. You did it ensure 1.2 DP was off when you have tested the underside of short term solution?

  Problem =
  * When the SP3 is anchored and double are connected using DisplayPort multistreaming (daisy chain), one or two screens will not be recognized after restart or power cycling the SP3. In both cases, the resulting no video appearing on external displays.
  * Some displays will expose rip video on the secondary display, what installation using DisplayPort multistreaming (daisy chain).
  * A view not to return to video mode displayed after recovering from power save mode.

  Workaround short term =
  SP3 Dock CDM on--> Dell mDP to DP cable--> #1 off DP (DP 1.2) monitor
  CDM SP3 on--> Dell mDP to DP cable--> #2 off DP (DP 1.2) monitor

  Long term = solution
  Microsoft is aware of the issue with their dock. They are developing a dongle special connector to the dock that works with the process of formation of link to boost the signal strength has negotiated with external monitors. As to when this will be available in September. Note the dongle won't be available in stores. You should open a case with Microsoft and show them that the problem occurs when you connect directly to the dock AMD and using double monitors in a DP 1.2 Garland of STD. They will then send you the dongle. I've heard other customers of this front line support Microsoft has not yet heard this dongle. Then wait until September to contact them.

• Problems with Premiere Pro CC 2014 H.264 encoding

  After update for first Pro CC 2014 yesterday, I see encoding artifacts on my H.264 exports.

  Same video source v7 and CC v2014 imported and exported using the parameters of the YouTube 1080 p 29.97 fps. Artifacts manifests itself in the form of softness/blur in some parts of the image every few seconds, particularly notice the area with a red circle below.

  

  Here's the source (GoPro HERO3 Black Edition), the rendering of the v2014 file and make it v7.

  Original: https://drive.google.com/file/d/0B2rJe0xgMTxFYXJiMjZpZ0stUzQ/edit?usp=sharing

  CC v2014 render: https://drive.google.com/file/d/0B2rJe0xgMTxFQ1B0Z09GS3I0a1E/edit?usp=sharing

  Get CC v7: Premiere Pro CC.mp4 - Google Drive

  [Version numbers fixed.]

  Post edited by: Jim Simon

  This problem is resolved in the update that was released today (2014.0.1, aka 8.0.1).

• Problems with Premiere Pro CS4: first use/installation

  I am a photographer. I have a Canon 1 d Mark IV, which takes HD video. I bought the Premiere Pro to edit video. It is installed without complaint. When it is called, it is VERY slow.  The first splash panel shows (purkle with "Pr"), but the long rectangle at the bottom is white without content.  After more time, the main window opens and then the boy in the window (to open a project, new project, help), but it does not display this content but is rather transparent right away to my paper painted (photo of my daughter).  If I take the small window and drag off screen and return the appropriate content then I can click on an option. From there everything is very slow and after each click, I have to drag the entire window off the screen, tap the screen to see the updated content.  If I import a .mov file I can go to play in the top left panel (I'm totally familiar with Pr at this point and excuse me for my lack of knowledge of the nomenclature) including reset at the beginning, etc.  But if I try to import more content via the bottom left panel, after every click of a choice of repertoire, I drag the window off the screen and come back to see the expanded choices.  This applies also to choose the codecs, frame rate and almost anything else.  It is, of course, unusable.

  I suspect it is a video card issue.  I am running Windows XP Pro on a core of two DuoCore 3.33 mHz with 4 GB of RAM and two Gigabyte 8800 GT cards and a relatively recent driver from the nVidia website. I have a RAID 1, RAID 0 and RAID 5 works disk system disk scratch to perhaps of 750 GB of free space. I run against viruses and malware as a software system for the defrag and registry mainenance maintenance, etc.  Most of the other Adobe products perform well including PS, Illustrator, Dreamweaver, etc..

  I don't know how to determine the cause of my problems.  I tried the Ko, but other than a few simple things, it is not very useful.  I hope that it is a well known symptom of something so if I missed it please just point me to what is necessary.

  On a side note, I will build a new i7 Win7 64 bit box this summer and would appreciate a pointer to where I can find the component builds that work well with Adobe Web Premium CS4 and Premiere Pro.

  How are your double vid-cards configured, SLI, Crossfire?

  The first thing I would do would be to get the latest driver for the nVidias.

  You're not sure if the blinds is available for Win 7, but you have? Update of the blinds has corrected similar problems.

  Good luck

  Hunt