Problem with Microphone

Similar Questions

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Satellite A205-SP5820 - problem with microphones

  Hello

  I have a Toshiba Satellite A205-SP5820, and it's been almost two months that my microphone stopped working (external & the built). Today, I installed three different drivers (the one downloaded from softonic, one page Web from Toshiba and the other from Realtek)
  They still do not work.

  What can I do?
  Thank you.

  That really strange, you have this problem with the internal and external microphone.
  The configuration of the laptop is not known to me, but if you have tried the mixture of different drivers I don't think it is unique to the pre-installed driver.

  I think that best option for you will be clean OS installation but using the Toshiba recovery image you have with your laptop. Toshiba recovery image contains fine work and drivers tested so if the problem will still be there, it can be hardware only question about.

  Clean OS installation option is right for you?

• Problem with microphone recording in Windows 7

  Original title: problem with the microphone

  Sir my drivers are perfectly fine but my microphone does not work and my default set and apply the buttons are grayed out in the record of devices.when im trying to put my problem its evrything saying isn't alrght theres no problem in my drivers... when im recording my voice, I found another seems not my voice... what should I do Sir

  Hello

  1 - is a built-in microphone? If Yes, what is the brand and model of the computer?

  If not, then what is the brand and model of the Microphone?

  2 did you recent hardware or software changes to your computer before this problem?
  3. what applications do you use to make use of the Microphone?
  4. are you able to record sounds using the sound recorder?

  5. what exactly do you mean when you say an different sound and not my voice?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Try to run the Audio recording utility and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  I suggest you to check if the microphone is set as default as playback devices.
  a. click Start, type Sound in the area start search.
  b. click on his research at the top of the start menu.
  c. click the Read tab. Notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:
  d. on the Read tab, select the playback device, click Properties, click the Advanced taband make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.
  e. on the Read tab, select the playback device, click set upand make sure that the configurations are set correctly.
  f. Select the audio device you want as default audio deviceand then click on set default.
  g. click OK to save your settings and close the sound dialog box.

  Hope this helps and keep us posted.

• Satellite Pro P300-13i / XP SP3 / problem with microphone

  Just bought a P300-13i and a beautiful machine, it's too. It came with a XP Recovery disk for playing for a few minutes then with Vista to check all knitted OK I brought back to XP (you need to be reliable and v quickly...) I'm a "one man band") and everything seemed to go smoothly with one exception v.

  The machine is supplied with a built-in webcam and microphone. Since the downgrading to XP microphone does not at all well (poor sound volume and a lot of apparent interference) - I confirm with Vista, it worked impeccably well.

  Called Tosh who tried to get a boost function to work... but they could not find. Same re - load the driver concerned but still no result. My problem was apparently 'high', but I guess that's fancy talk for "we can not help you" because I have not heard for over a week now...

  I was wondering if there was a spark out there that may be able to help me... also borrowed USB a friend and who has worked well... but obviously bought a machine with a microphone built-in microphone, I don't want to have to lug round, a plug in mic with me as well!

  The machine is heavy enough as it is!

  Look forward to hearing from someone.

  Lindsay

  Wonderful information!
  Thanks for sharing this with us!

• Problems with microphone? + other multimedia USB device asks :)

  Hello

  I have an Equium A60-181 and he doesn't seem to like my headset which I believe is one of these types of condenser, which needs a power supply.

  It works fine on 2 of my PC sound cards and my old laptop but not the tosh. I had a quick look in the settings of the sound card, there is no option to 'feed' the microphone. Am I to understand that they did not bother to put this feature in their microphones condenser produced portable computer are the microphones commonly used for computers?

  There is also no line-in on this laptop which is a little inconvenient since I wanted to make the bass real time video coding pity really the RealTek does some funky features with its sound chips.

  As a solution to my lack of line-In I was thinking of buying a USB SoundBox something like a creative labs. Anyone here tried a USB SoundBox are fast reliable low latency etc.?
  I plan on buying a video encoder ZIO CAMERAMATE VIDEOSAFE USB CM53000. They are all good or could someone recommend another brand best one making double capture of field (> 288 lines).

  See you soon,.

  Richard S.

  [Edited by: admin on 21 March 05 14:17]

  Hello

  I put t know what kind of headphones you use but my is simple and works very well. I use it mainly with Skype and there is no problem. The sound quality is good. One of my friends has a Tecra laptop and it don micro need because there is a built-in screen coverage.

  In my opinion the microphones and video stuff are specific things and each user must search for only the right solution. Last year I tried to connect my VCR VHS to my protégé. I used Pinnacle studio moviebox. It is also connected to the laptop using the USB port. I had no problem and I was able to save all my old videos on the HARD drive. Quality was not brilliant but good enough.

  I'm sure that the USB video encoder will work correctly with your A60. It is just important to read user manuals and see what is the right way to install it correctly.

• Problem with microphone line

  After the upgrade to Windows 8.1 my microphone online presents as "not connected" when my Touchsmart 300 PC. It worked fine with Windows 8.

  I guess that HP has not yet the right driver. Any ideas on how to solve this problem?

  Thank you

  Hi Stavrosv52,

  Upgrade of Windows 8 speakers aren't working not.
  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  Please let me know.

  Thank you.

• Skype problems with microphone in Windows Vista

  I have a windows Vista laptop and cannot get Skype to work at all. My Tech guys are at a loss and advise that Vista stops working. They also tell me that there is no microphone in windows vista? The person I call can hear me and I can see them but they don't hear me. I tried the helmet, which is supposed to be compatible with Skype but no luck so far. Any ideas?

  I have a windows Vista laptop and cannot get Skype to work at all. My Tech guys are at a loss and advise that Vista stops working. They also tell me that there is no microphone in windows vista? The person I call can hear me and I can see them but they don't hear me. I tried the helmet, which is supposed to be compatible with Skype but no luck so far. Any ideas?

  Hey lollipop Molly

  the manufacturer of your laptop is the question on the built-in microphone

  you have other sound problems or is it just with Skype?

  and you have the latest updates of driver from your site for your model laptop laptop manufacturers

  Walter, the time zone traveller

• Problem with microphone headphones

  Hello

  I've upgraded to the last build number yesterday (23.4.A.0.570) after that when I call, my microphone head set does not (Sony MDR-XB50), but no problem when someone calls me.

  I checked with different helmets, the same problem exists.

  Using recordeing voice programs and also my phone diagnostic tools, I tested the microphone of the headset and it works fine.

  Please let know us, as this question is very annoying because I use this phone + head to go on a good number of Conference calls every day.

  Waiting for your kind response,

  Kind regards

  @Farideddin

  Check this

  http://talk.sonymobile.com/T5/Xperia-Z3-Z3-dual/Z3-dual-headphones-microphone-issue-5-1-1/m-p/102618...

• Problem with microphone on the new laptop.

  Hey there I was wondering if someone could help me? I bought a Toshiba satellite L50t-A - 14 h and my microphone does not really work when I disable it, it always says its noise pick up! and its very very static when I listen to it! Ive tried everything to lower the amp microphone configuration with improvements everything and nothing works! I need to use you mic but can't when his garbage please help me

  Hello

  Have you already checked the Windows audio settings if the Microphone is on and the Microphone sound level is not set to 0? (Just go in Control Panel > hardware and sound > manage audio devices)

  First try to move your laptop to another location and check. If have any magnetic device such as speaker or TV this may cause static noise. As you have tried troubleshooting of Windows, sounds like unwanted material. Follow these steps and check if that helps:

  Step 1: check the microphone settings in the control panel-> sound-> recording tab
  Here, you should see two entries; internal microphone and external microphone port. The internal mic must be enabled.

  In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.

  Step 2: Reload the audio driver may resolve this problem.

  http://www.Toshiba.co.UK/innovation/download_drivers_bios.jsp?service=UK

  Also see this link: http://forums.toshiba.com/t5/Audio-Sound-Knowledge-Base/Laptop-Microphone-not-working/ta-p/332996

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Problem with microphone on iOS - bug or bad code?

  Hi all

  It seems that the use of the micro class freezes my Flex app. I provided the code below, but here is an overview:

  • This only happens on iOS - specifically my iPhone 4. I have not seen this problem on Android devices.
  • My code alternated recording and records don't not - 5 seconds to one, then 5 seconds of each other, then repeat over and over again.
  • I have reduced this to a 'minimum' example (see code below) which does this. It does not use data etc. coming the Microphone is not create or fill a ByteArray.
  • The application always crashes. In some cases, this happens when he worked only 2-3 minutes, in all cases, it happens in half an hour. I did 10 sets of tests and the average is 15 minutes.

  My application is a language learning app and recording and playback of the voice of the user is an important feature. It allows the user to hear how their pronunciation matches that of a native speaker. When recording / reading is marketed the software repeatedly plays a few sound recordings, the voice of the user, it reads, the more audio plays, etc.. In other words, it includes features similar to the minimal case code I included here. Users often use this feature 30 minutes or more. It is therefore a problem.

  I'm doing something wrong in my code? Just checking before I report it as a bug.

  You can download an FXP from here if you are interested:

  http://www.Brightworks.com/downloads/RecordingTest.FXP

  Alternatively, the important code is below. This is the display (only) of the sample application.

  Thank you

  Douglas

  Douglas McCarroll

  Brightworks, Inc.

  320.300.0220

  <? XML version = "1.0" encoding = "utf - 8"? >

  < s:View xmlns:fx = " " http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  creationComplete = "onCreationComplete().

  title = "Test recording" >

  < fx:Declarations >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  private var _isRecording:Boolean;

  private var _iterationCount:uint = 0;

  private var _microphone:Microphone;

  private var _recordedSeconds:uint = 0;

  private var _timer:Timer;

  private function onCreationComplete (): void

  {

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  }

  private void doNextPhase(event:TimerEvent_=_null):void

  {

  _isRecording =! _isRecording;

  If (_isRecording)

  {

  _iterationCount ++;

  displayOutput ("Recording");

  _microphone = Microphone.getMicrophone ();

  _microphone.rate = 44;

  _microphone.gain = 50;

  _microphone.setSilenceLevel (0, 2000);

  _microphone.addEventListener (SampleDataEvent.SAMPLE_DATA, onNewRecordingSampleData);

  }

  on the other

  {

  _recordedSeconds += 5;

  displayOutput ("Pausing");

  _microphone. RemoveEventListener (SampleDataEvent.SAMPLE_DATA, onNewRecordingSampleData);

  _microphone = null;

  }

  }

  private void onNewRecordingSampleData(event:SampleDataEvent):void

  {

  }

  private void displayOutput(phase:String):void

  {

  var freeMemoryMB:int = Math.round (System.freeMemory / (1024 * 1024));

  var privateMemoryMB:int = Math.round (System.privateMemory / (1024 * 1024));

  var totalMemoryNumberMB:int = Math.round (System.totalMemoryNumber / (1024 * 1024));

  phaseLabel.text = "Phase:"+ phase; "

  iterationLabel.text = "iteration:"+ _iterationCount; "

  recordedSecondsLabel.text = ' seconds saved: "+ _recordedSeconds;"

  freeMemoryLabel.text = "System.freeMemory MB:"+ freeMemoryMB; "

  privateMemoryLabel.text = "System.privateMemory MB:"+ privateMemoryMB; "

  totalMemoryNumberLabel.text = "System.totalMemoryNumber MB:"+ totalMemoryNumberMB; "

  }

  private function startTimer (): void

  {

  _Timer = new Timer (5000, 0);

  _Timer.addEventListener (TimerEvent.TIMER, doNextPhase);

  _Timer.start ();

  }

  private function onStartRecordingButtonClick (): void

  {

  If ((Microphone.getMicrophone ()))

  {

  startRecordingButton.enabled = false;

  startTimer();

  doNextPhase();

  }

  on the other

  {

  phaseLabel.text = 'No Mic' available;

  }

  }

  []] >

  < / fx:Script >

  < s:VGroup height = "100%".

  Width = '100% '.

  paddingBottom = "20".

  paddingLeft = "20".

  paddingRight = "20".

  paddingTop = "20" >

  < s:Label id = "phaseLabel".

  Width = "100%" / >

  < s:Label id = "iterationLabel".

  Width = "100%" / >

  < s:Label id = "recordedSecondsLabel".

  Width = "100%" / >

  < s:Label id = "freeMemoryLabel".

  Width = "100%" / >

  < s:Label id = "privateMemoryLabel".

  Width = "100%" / >

  < s:Label id = "totalMemoryNumberLabel".

  Width = "100%" / >

  < / s:VGroup >

  < s:HGroup width = '100% '.

  horizontalAlign = "center".

  Low = "10" >

  < s:Button id = "startRecordingButton".

  label = "Start Recording"

  a click = "onStartRecordingButtonClick()".

  Width = "60%" / >

  < / s:HGroup >

  < / s:View >

  The problem has been resolved with 3.8.0.730!

  http://forums.adobe.com/message/5399512#5399512 ;-)

  Thank you Adobe!

• Satellite Pro P300-135/Windows Vista / problem with microphone and Crystal

  Hello

  Can someone help me please? I reinstalled my Vista and my microphone does not work. When I try to plug in my headphones, they are also dead. Nobody knows what kind of drivers can be responsible for this?

  And how you try reinstalling Vista? Using the recovery image (factory settings) or you try to install the clean version of Vista?

  Sorry, but I don't see any sense why you are doing this. Your laptop comes with Vista. Is there a particular reason to achieve?

• Problem with microphone when using the speakerphone in 5.1.1

  During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
  To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
  What is c?
  Please someone try and post it here...
  We need an update I think to fix this bug with mute mic!
  Please answer me.
  Thank you.

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Problems with microphone on windows 7

  Hello

  I recently updated my HP PC from windows vista to windows 7. So my microphone no longer works. It shows to be hip, but he is not listening to my voice. How can I solve this problem? Can I download an artifice or buy microphone?
  Thank you
  ARPI

  Update your audio drivers on the HP support site. Download and install specific drivers for W7.

  See you soon,.
  Jerry

• Problem with microphone for narration

  I've got dell m45 with nvidia card running win 7 64 bit and pre9.  Try as I might to turn on the headset to add a narration track, that nothing works. I have

  Followed the instructions using adobe and ensured that the headphone and microphone are on in the sound settings... Finally resorted to the sound recorder and had to import my audio narration as new media...  No idea how to get the microphone pre9?   Edit/preferences/audio material displays only one possibility. It is already checked... I don't see how to get the new options in adobe, as the choice of a different audio input option...  When I click on the microphone icon, I get a message sayinf that no input channel is selected and I do the thing to edit preferences to select a...  But I can't find any way of the input channel selection... Please help if you have a clue as to my situation and cure...

  Thank you

  DAvid

  If it has a 1/8 "taken, that fits into your sound card, is recognized by the operating system and sound card, so he EXPECTED to work pre.

  Good luck

  Hunt