Problem with new monitor

Similar Questions

• Problem with new monitor when you play Cityville

  Recently installed new monitor (HP2511x), now the zoom in/out function does not work in Cityville.  It works very well to Farmville, and it still works in Cityville on my laptop, so it's something on the new monitor.  Any ideas?

  It sems to be a chip on board:
  http://en.Wikipedia.org/wiki/GeForce_6_Series#GeForce_6150SE

  You have no problem with your old monitor?
  Did you use another resolution (bottom) with the old?
  You can try to fix this old resolution for your new monitor, too.

  Then there should be no problem for your graphics chip.

  HTH
  C.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• Problem with new PC Toshiba laptop

  I don't have good experience with Toshiba as a great brand.

  I brought a new laptop of dicksmith elizabeth her (SR4192426). At the time of the sale, the saleman said if you have a problem with the machine to come back and we can repair or replace. This is the Australian rule if you have a problem with in month thn, it should be replaced rather than fixing. I have problem starting with the product within one month, I approach of dicksmith three times, but they gave me a lollipop. I am very disappointed by the service of dicksmith. I am very disappointed by the service of Toshiba. I sent to iseekcomputing and call back from their $65 would be paid by the customer to solve this problem, if the same problem is coming soon in the future that agaim pay $65 to fix.

  I have the Toshiba team ring that they reset as factory defauld but the problem. In the end, I want to replace my laptop because I am not happy with that. I've used nothing, much work is underway and my laptop is still iseekcomputing since Monday.
  Kulwant singh

  In the end, I want to replace my laptop because I am not happy with that.

  AFAIK that the manufacturer of the device does not replace the unit, but in case of hardware problems, the warranty will cover the repair costs.
  If you want to replace the unit purchased, you will need to talk to your dealer who...

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• Problem with new incoming messages to my Windows Mail account

  Since 2-3 weeks, I've known more fault with new messages from my Inbox on Windows Mail.  I have the 1st message, but then the connection is interrupted and I get the following message: "your server has ended suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.tiscali.co.uk', server: 'pop.tiscali.co.uk', Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800CCC0F. "Error may occur when I log in to access new messages from the server, or when the mail comes while I was already connected.  The fault is intermittent: sometimes I can access mail normally again.  When I live the flaw, I close the Windows Mail error message, press the send/receive button and my incoming emails (including the 1st) is normally followed.  For the record, I'm not problems with outgoing mail.

  I would appreciate any ideas on what could be causing this fault and what remedial measures I could take.

  Charles

  You are welcome.
   
  See if that helps.
  http://www.solveyourtech.com/how-to-disable-or-turn-off-email-scanning-in-Norton-360/
   
  I have no first hand know how to do this in Norton that I would never use Norton. Very common with any security program which is mail scanning has never caused a problem, but there is an update and 'poof', there you go.
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   

• HP Officejet Pro L7590 problems with new software

  Hello

  I have a HP all-in-one OfficeJet Pro L7590.  I had to move the printer on another computer that is running Windows 7.

  When I install and try to print to the printer does not act as he did with the software that was on the old computer XP.

  What I mean is that the printer will not print double side which is a feature that I used a lot.

  I downloaded and reinstalled the software and downloaded used the HP print and Scan doctor.  When executing this I was told there was a driver conflict so I unplugged the usb cable and drivers have been removed and when I plugged it in new dirivers were installed.

  Always when I go to properties and select Quick economy and printing on two sides he spits a page then the printer acts as if it was out of paper, and then when I press OK on the printer it prints the second page on another sheet of paper.  Note: What is printed on the 1st page prints correctly and what is printed on the 2nd page works properly for printing on the other side, but it is not the other side, but a separate sheet of paper.

  Your help would be MOST APPRECIATED what!

  Note: I repeat that the software that worked under Windows XP has never had this problem.  This new version of the software running under Windows 7 has a problem.

  Hello

  Just to thank everyone who responded to my questions about the problem with printing 2 Facer on OfficeJet Pro L7590 by HP.  I did the following and it seems to have solved the problem of this printer DO NOT print on two sides of a sheet of paper.

  1 deleted all the computer printer software

  2 used the utility available on HP website washer to clean any persistent software that I couldn't find.

  3. set the printer back to factory defaults.

  4 use HP printer Installation Wizard to find and install the fix version of the software that sits on the HP website.

  Thanks again for those who repsonded and I hope the above helps anyone who might read this message.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with new router WRVS4400N

  I recently bought a new Cisco WRVS4400N router for our network which has 19 computers connected to a switch of 24 ports.  We currently use a D-Link router and migrate to the Cisco router.  The problem I have is that as soon as I connect one of our servers or the switch 24 ports to the Cisco router I can no longer access the internet or the connection to the network, I can also access the routers of each server configuration.  If I connect the router to make a stand-alone computer I can access the configuration and change things, but as soon as I connect the server or switch 24 ports everything dies (all lights are green on the router but if everything is connected).

  Has anyone experience this problem with this router?

  Any help would be greatly appreciated.

  Kind regards

  Shawn

  Hi Shawn,

  Thank you for posting. The server provides DHCP on your network? If so, disable the DHCP server on the WRVS4400N before you connect it to your network.