Problem with partition hard drive!

Similar Questions

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• Problem with connector hard drive to spring on T43 motherboard

  My T43 (type 1875) cannot operator unless I am pressing on toward the down on the palm rest above the spring certainly drive connector.  This connector seems to be designed to move upwards & downwards on two positions.  44 pin hard drive seem to connect indirectly to the motherboard via 44 springs in this assembly.  This Assembly should be compressed manually for the system to communicate with the hard drive.

  I do not understand the physical design of this connection?  I certainly do not understand the purpose of this complicated mechanism.  It is part of the protection of the hard drive?

  To correct the problem, I see two possible solutions;  either compress the springs, then bend the stems of alignment to maintain the State of compression, which makes electrical connections or replace the motherboard.

  If someone put me on how I could fix this?

  -Michael Faklis

  Note of the moderator; email address removed before finding too much spam

  This is common with the T4x problems and those who have not been carefully reassembled since the Council can become cracked over time especially when door one-handed from a corner as a person would natrually.

  Even models 15 inches and their solid upper bezel can experiencine this issue, but the models 14 inches and the palm rest of split and are the most sensitive.

  The system works when you press the right ALT just below and to the right of the trackpad?

  If you took the palm rest off the power, then press the plug of the battery, it restores the operating system?

  If so, you may be lucky that the Council itself cannot be cracked but it could be the connectors of taking battery BIOS on the Board and in this regard a $3 repair. Cut the connector and replace with a new one or cut and reweld to ensure that the circuit is solid.

  If it is cracked, you can hold with some high quality neoprene since used neoprene "shrink as styrofoam when exposed to heat and pressure. Shim planks will run, but the added stress of ttignehtning it back together can create other pauses as you are bowing the bridge so that the stress has to go somewhere.

  In addition, the system will work better if it remains stationery for a portable shim will pass when the goods are shipped under nomral conditons.

  Finally, the entire system will be brick and you can save or part the rest of it.

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• problems with upgrade hard drive on X200s

  Hi I'm trying to upgrade my old hard drive (SATA 200 GB at 7200 RPM) on my X200s (Windows XP - SP3, 3 GB of RAM) to a new hard drive: Seagate Momentus 750 GB

  To do this, I created 3 partitions in my new hard drive:

  1. a 400 GB partition to recreate the existing Windows system

  2. a 25 GB recovery partition, which is preventing the drive from origin of the existing partition from rescue

  3. the rest (about 325 casuals) on a FAT32 partition empty (on which I intend to install linux or freebsd later)

  Then I cloned the recovery disks and windows using Acronis and then replaced the old disk with a new one.

  Finally, I see the following error message:

  Playing a disc error has occurred

  Press Ctrl + Alt + Delete to restart

  I tried to fix the master boot record using a disk objects, but the hot spare displays the blue screen of death at half way through. Put the old drive brings the system online. New drive works as well when I put in a basket USB and find in files.

  So I would like to know if there is a way to step by step to diagnose the problem.

  Thanks in advance.

  OK, I think I thought about her. There seems to be some kind of problem of bootloader. To fix a little:

  1 make sure that you create a rescue disk before doing the clone and replace. I highly recommend the Hiren's boot disk that you can download here:

  http://www.hirensbootcd.org/download/

  2. can the amorçage using this disk. From there, I see the options - Boot Windows / XP in the main hard drive (it's the first option). When I select it, I can start fine in the cloned disk.

• Problem with large HARD drive > 2 TB

  Hi people.

  I have a new server with 4.5 TB in RAID 5 and I would use it for Virtual Machines.

  But whatever I do, the local data store by ESXi cannot be more than 1.41 TB (I guess 600GB's for Esxi itself).

  So there is a limit of 2 TB that Esxi is only 32-bit?

  I divided my raid and installed Esxi on a disc Go 700 and would like to create a different data store on 3 TB raid.

  But unfortunately, if I use the data store on the first HARD drive (say 500GB) I can only create another store of data with 900 GB maximum.

  VMware Infrastructure shows me that there is more space on the raid, but it is not available for partitioning, or to assigning a new data store.

  A way to solve this problem?

  I have 6 x 750 GB SAS and would prefer RAID 5 for all discs, resulting in 3.5 TB disc space

  VirtualUser09 wrote:

  I would llike to use every bit on my local raid.

  regardless of the size of the LUN, using all available space is not a good idea.  You must leave a free space (15-20%).

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

  I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

  I don't know which driver download for this problem.
  If anyone can help it will be much appreciated. I am running windows Vista x 86.

  Hope helped photos

  Hello

  The first error message said nothing; He only says that something is wrong on the HARD drive.
  Why you n t pres the button Don t ask me once again this problem?
  It seems the message again using this option?

  On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

  On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

  Check it!

• A problem with the hard drive of your computer

  Windows is not able to open a file on the hard drive of your computer. This could be a temporary condition that may disappear after you restart your computer, or it could be a more serious problem with your drive hard or its driver. I tried to restart my computer, I ran the hard drive error checking, nothing seems to help. Please advise?

  Hello

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Problem with the hard drive on the computer.

  Hello

  my hard drive is 500 GB, but my hard drives are less than 100 GB

  I want to increase my hard drives storage

  So, what should I do?

  One who partitioned the drive had little idea about what they were doing.

  You have a spare TWO HUNDRED eighty THREE GB unallocated at the end of the training. This is the rest of the space.

  Use a partition manager to absorb space unallocated in the existing partitions.

  Aomei is as good as no matter what...

  http://www.aomeitech.com/aomei-partition-Assistant.html

  Merge unallocated with E drive space by selecting resize them...

  Then resize D space e administration until E is that it is currently...

  Then resize C until the D is about the same size as e...

  The above will take time to complete, and you should make a backup of all data before you begin...

• Activation problem with new hard drive on another computer.

  When I upgraded to Win 8 on my pc, I decided to install my copy of Win7 on my computer laptop girls as well as an upgraded HARD drive. As we had all two Dell Inspiron Laptops and his laptop was in use, I installed the new HARD drive in my laptop and proceeded to the installation and updates at my ease.

  I made the mistake to activate the Windows 7 successfully while the new HARD drive in my laptop.
  My problem is when I mount the HARD drive in my Dell laptop, it took re activation of girls and he does not accept the key.
  Can anyone help?
  Thank you, Simon
   
  Original title: the woes of Activation

  14 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can purchase a license upgrade and convert the license for use on the new system:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Version upgrade - Microsoft Windows 7 Ultimate Upgrade

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

  When you get the license for the corresponding edition, follow these steps:

  Press Windows key + R

  Type: slui.exe 3

  Press enter

  Enter the new product key, and then click next to activate via the Internet.

• I have problem with my hard drive on my alienware laptop mx14 r2

  I have a problem with my alienware mx14 r2...

  with the error... on the hard drive... which I can't get into windows 8.1...

  I did a restore on it n lost all my files include restoration to factory setting...

  now... my hard drive looks like can fail at any time...

  I'm looking to change my hard drive... but do I need to take note of? I mean the size of the thickness of the disc or your hard drive model... as I see it a lot after State of a 7mm disc...

  and for costs, install windows 8... I don't have the Disc... because it comes with the version of preinstallation. I don't have the product key... I buy a new one from the windows key...

  hope someone can guide me to Thursday. Thank you very much

  Windows 8 and above have info on the motherboard which will see you put Windows 8 x hard disk and if same sys op you precrash, it will authenticate it and you'll be fine.  You should never buy sys op on windows 8 and especially if you put same op sys on new hard drive.

• Problem with external hard drive 500 Gb Stor.e Steel

  Hello

  I ve bought a Store.e steel 500 GB external hard drive and I can't get large files (such as 4 GB) it wit. There is a message that says that the file is bigger that the system supports whenever I try to get a file of 4 GB, but I have 300 GB of free.
  What evil?
  Thank you

  I agree with user Stephen.
  The file format of HARD drive seems to be FAT32, you must format the HARD disk to NTFS to be able to manage files over 4 GB.

  Welcome them

• Re: Problems with the hard drive on a Satellite A200

  Hello

  I got my Satellite A200 (PSAE6E) for many years, and although I was interested for her order to to finally make the hard drive gives its first signs of failure. The symptoms started coming a few months ago. The disc will stop working, the system hangs, and I begin to hear a clicking sound from the disc. I'm afraid that one day it will stop working completely, and I can't afford without a laptop.

  I would replace it for a new hard drive, or one that is in good condition, but I'm having a hard time finding information on hard drives compatible with this model. Could someone help me with this?

  Thank you
  Gloom

  What you can do is to remove the original HARD drive and order the same.
  What you really need, it's SATA HDD and you can get it in every electronic or PC Magazine. I assume the original HARD drive was about 200 GB. What you can do now is to buy a new one with more capacity.

  Either way, what operating system are you using? I mean Win7 works perfectly on this old piece of hardware.