problem with printing on wireless network

Similar Questions

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

  Hello

  I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
  "There could be a problem with one or more network adapters on this computer." Help, please!
  Thank you!

  Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

  The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

  Hello

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the procedure in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2

  Check to see if the problem exists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• HP Deskjet 3830: Have repeatedly reset the printer's wireless network settings

  When I did a WiFi from my laptop to my Deskjet 3830, I does not specify the need for a password, but then when I came back the next day he asked my password (and refused to accept my normal netwrk password).

  I posted the question here, and someone told me to reset the settings of wireless network printer, who worked. But after a while, he returned to ask me the password and I have to reset again!

  How to avoid this problem?

  Greetings @peterB66,

  Thank you access the Forums from HP Support for extra support! I see you want to know how to stop the printer on an intermittent basis provide the password. I will do my best to help you with this problem.

  I suggest updating the firmware of the printer to see if it will help: DJ3830_R1604C.exe

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• Deskjet 6988 printer to wireless network (laptop Envy w / Windows 8.1)

  I got my printer HP Deskjet 6988 years and still it was connected to my desktop via a USB 2.0 cable. I bought a laptop HP Envy with Windows 8.1 and want to connect the printer through my servant/Belkin router network, as the USB 2.0 cable provided with the printer does not seem to work in the USB ports of the desire for direct printing. The software disk did not work in the laptop, so I downloaded the software and utility software (printing and scanning) to 8.1 on the HP site.

  I ran the download, the installation wizard has started, said "the wizard will connect to the internet and help install the best software available for your printer." I clicked on next, and opens a window "Device discovery" and then an another "recovering the device" then... nothing.  The wizard window closes. My installation manual is useless. It tells me to use the wizard on the software disk that does not work on my laptop (and is obsolete and for the operating system still wrong, because it was for my office, which took place on VIsta.)

  I somehow managed to get the printer installed on the laptop - I can see it under the available printers.  And if I have an ethernet cable connected directly from the printer to my router, it will print. But if I unplug the ethernet cable, it will not print. I can't keep the ethernet cable is connected for printing, because the router is in my living room, behind the TV and my office is on the floor. I prefer not to keep my printer on the floor of the living room by our TV, so I really need to work wireless!

  My problem is how to make the printer added to my network (Belkin router) servant. The wireless router is all set up and functional - I use actually it from now to access the internet and to post this message.

  So, my printer is installed on my laptop. The driver is the most recent, intalled today HP.com and I don't have a software disc to use for a Setup Wizard.

  What are the next steps to connect my printer on the network, so I can print wireless? If all goes well, I gave enough information. I have read all sections of the HP.com customer help on service and none of them seem to tell me what to do.

  Thank you!

  By a lot of trial and error, I actually thought about it myself. I did a lot of jumping around, so I hope that I can remember what I did:

  (1) install the printer driver using the diskette or download.

  (2) connect the printer to the router by an ethernet cable, which looks like a big phone cord (no need to connect the printer to your laptop).
  3) implement the system of the laptop 'search' on your laptop and in search type "Network" and then click on the 'Network' link to open it.

  (4) you should see the icon for the printer on your computers and other devices already present on the network.

  (5) double click/tap on the icon of the printer and it will open 'web page' the printer in your browser.

  (6) click / tap the 'Network' tab near the top of the scren.

  (7) in the left sidebar, under 'Connections', click 'Wireless' to open it.

  (8) start and use the wizard to enter your router information. (You must specify the printer a different name here, so you can distinguish it from all other printers on your laptop.) For example, I named mine "Deskjet" 6988 Network)

  (9) unplug the power cord of the printer ethernet.

  (10) If your wireless printer does not appear in the list of printers when you go to print something, you'll need to add:

  11) open looking for new portable computer system and type "Devices and printers" and click / tap on the link.

  12) click on the link "Add a printer" upward. The computer will search for printers and the new network printer should appear in the list (hint: he wil have an IP address in the 'Address' column rather than a file.)

  (13) add the network printer and run the test to ensure that it works. Make your default printer and may delete all other 6988 printers listed if you want to.

  (14) you should now see your network printer in the printer list when you go to print something.

  I hope this helps someone else someday!

• Printer on wireless network goes offline

  We have a home wireless network with some XP and some Vista computers.  Printers are on a Hawking Technologies print server.  We may set and access printers on all computers.  However, after a certain amount of time passes, Vista computers display printers server as 'offline '.  This does not happen on the XP computers.  The only remedies are to reboot Vista computers or drop and redefine the printers.  Y at - it a setting I missed that will maintain the connection to the print server?  If not, is there a command that will be re - connect to the print server without having to reboot?

  Thank you.
  Peggie F.

  Hi Mary,

  We would like to get a little more information to help with your problem.  You better, please answer the following questions.

  • What is the model number of the print server?  You can try to install an update of firmware for it.
  • This happens on the Windows Vista PC while it is idle or in use?
  • The PC Windows Vista go to standby or hibernation until the problem occurs?
  • The Windows Vista PC are updated with the Service Pack 1?

  Please try to run the following commands on one of the Windows Vista when the problem occurs and see if the printer then returns online

  • Click on the Start ORB, then type cmd in the box start the search
  • Clic click on cmd in the programs list, and then select run as administrator
  • If, you are prompted for an administrator password or a confirmation, type your password or click continue
  • At the command prompt, type the following commands and press enter after each one

  net stop spooler
  and then
             net start spooler
  
  This will stop and restart the print spooler service.  If this solves the problem of the printer is offline, please let us know.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.