Problem with radio buttons does not

Similar Questions

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• I have problems with my DNS does not. It happens every day.

  I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

  original title: DNS is not responding

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Perform the steps mentioned below and see if the problem persists.
  a: click on the button "Start".
  b. in the search box, type "invite."
  c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. at the command prompt, type ipconfig/flushdns.
   
  Method 2: Click on the link below and see if the problem occurs.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-keep-getting-this-message-your-computer-appears/7b1f225b-5936-495e-be3d-9ec1d074d3b5
   
  Method 3: Click on the link below and see if the problem resolves.
  http://support.Microsoft.com/kb/928152
   
  
  Hope this information helps.

• Selection of a radio button does not work in a popup invoked by default

  Hi all

  I'm working on a condition in which action triggers innovation of a popup on the Web page. The popup has 2 radio buttons and by default, I need to show one of them selected.

  I use the code below in the declaration of popup for the radio buttons.

  < af:selectOneRadio id = 'sor1' autoSubmit = 'true '.

  styleClass = 'popup-text-key '.

  value = "accept" >

  < af:selectItem label = "#{portalBundle.ACCEPT} '"

  value = "accept" id = "si3" / >

  < af:selectItem label = "#{portalBundle.REQUEST_FOR_CHANGE} '"

  value = "requestChange" id = "si2" / >

  < / af:selectOneRadio >

  The problem is when I run the application, on the call of the pop-up window, the default selection in the radio button is not displayed. If I put this code somewhere else in the Web page, the selection is correct.

  Any suggestions or pointers would be useful.

  TIA

  This is what works for me (well I used 12 c but lets see if it works for you too)

  The bean code

  public class PopupRadioBean {}

  String selRadio;

  {} public void setSelRadio (String selRadio)

  this.selRadio = selRadio;

  }

  public String getSelRadio() {}

  If (selRadio == null) {}

  selRadio = "accept";

  }

  Return selRadio;

  }

  public PopupRadioBean() {}

  }

  }

  Page code

  As you can see, I put the string selRadio in bean to 'accept' if the value is null (meaning that the option button has not been selected).

  Timo

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Strange problem with HorizontalFieldManager - it does not show on real device bitmap

  I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

  The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

  Here's what I see on Simulator and some devices

  

  Here's what I see on the real blackberry:

  

  Code:

  ......

  OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

  The solution is to extend the RadioButtonField field and replace the positioning method:

  RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

  SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

  public RadioButtonHack() {}
  Super();
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected, long style) {}
  Super (label, group, selected, style);
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected) {}
  Super (label, selected group);
  }

  public RadioButtonHack (label As String) {}
  Super (label);
  }

  Protected Sub layout (int width, int height) {}
  int temp = this.getPreferredWidth ();
  setExtent (time, height);
  Super.Layout (time, height);
  }

  }

  resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

• 2542: problem with cartridge - mail does not

  I have a problem with printing (scratches on print). Contacted HP via support form and received a mail that I get a new cartridge. So far so good.

  In the HP E-mail additional requests for information (address details), replying to the email does not work, and there is also no way to share the info with HP. How to proceed?

  Hello

  I've included a list of country phone numbers support in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Another problem with socket: socket does not receive the although it is ready

  Hello!

  I read a lot of discussion about the casings, but I wasn't able to find a working solution:

  I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.

  I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!

  For this I use wap2.

  5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).

  Can you give me a clue what I'm doing wrong?

  This only happens on the device, not in the Simulator!

  That's what I tried:

  -with the help of a DataInputStream (I wasn't able to find a difference)

  -using another overload of. read()

  P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.

• Problems with the keyboard does not

  I am on windows 7 and for a week, my keyboard does not work. some of the keys do not work. p, return, tab key, and a few others do not work. My on-screen keyboard works fine - except for the question mark-. I tried the drivers, and the computer says that it has the best drivers so no need to update. I don't know where it came from, but then, after an update of windows, my keyboard is back to normal. It worked fine for three days and then, once again, he screw up. It's always the same keys that don't work, so I don't think that my keyboard is worn. my computer is only a year. It's a computer laptop sony vaio. whenever I press the p key, for example, the Start button - a physics - flashes. same thing for the other buttons. When I press the return key, the Start button flashes.

  in the bios, the keys do not work either.

  can anyone help

  Get a cheap USB keyboard and see if it works.  You can buy those cheap for $10 or less.  The fact that the keyboard does not work in the BIOS means is not a Windows problem.

  Good luck.

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Having a problem with my page does not stop scrolling?

  Hi, I am very new to Muse and have been plugging away learning and design. I came across a new issue where when I go to preview my site, that my pages are not self limiting the amount of content I have on her page, if that makes sense.

  On one page, I have a picture of style small hovering with a small text below, does not come close taking over my office around, but there are still some amount scroll down on the page. On another page I have an image gallery and if you scroll down it just guard putting a space more photos below and you can scroll basically forever. Any contributions to this issue would be greatly appreciated.

  Thanks, Ben

  That's great! An easy solution: simply omit the widget!

  I paid for the widgets (like others) that presented of problems... when all else fails, stick to what provides the Muse. Frustrating at times, but they do not work.

  (Can also be useful to meet with the developer and asking for a solution/explanation)

• Problem with complex schema does not

  Hello

  I created the fairly complicated pattern: http://i.imgur.com/Wt2Bo7w.png

  And when I'm playing with him (some pathfinder to the cutting edge etc.) Illustrator is "not responding" problem and after a few minutes it comes back to life (with process finished). It's weird because my machine is pretty good and Illustrator, while that "does not" use only 30% of my CPU and about 6 GB of ram (I've got 16 GB). Is there a way to make it faster? What would you recommend?

  Try using fill patterns.

  Or try to use overlays raster graphics

• Problem with Photoshop CC does not work after update

  I downloaded and installed Photoshop CC yesterday and worked with it without any problems. This morning, the cloud said that there is an update

  So I installed which.

  Now, the program will open but it does not meet anything, I can't access any of the Menus or load an image. The only way I can close

  is the hit Control-Alt-Delete.

  What can I do to fix this?

  David

  Hi dneely101,

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html .

  Kind regards

  Romit Sinha

• check the radio button does not submit the form?

  Hello

  
  

  Your name:
  E-mail address:
  Contact no.:
  Topic:	Appointment Opening hours Products Other
  Message:
  	Enter the above code here: Can not read the image? Click here to refresh

  
  

  I have a form on my site,

  and all his work.

  But I noticed that the information of the radio button

  is not sent?

  may an advise why?

  Also, can someone suggest how I can configure the name where the email?

  as when the email is downloaded, it come with my Web Host/Server name?

  Thank you

  < Center > < form name = 'contact' method = "POST" action = "form_process.php" >

  < table width = "306" border = "0" cellpadding = "0" cellspacing = "0" >

  < b >

  < td width = "93" height = "28" valign = "top" > your name: < table >

  < td width = "213" > < input name = "name" type = "text" >

  < table >

  < /tr >

  < b >

  < td height = "28" valign = "top" > Correo electronico: < table >

  < td > < input name = "email" type = "text" > < table >

  < /tr >

  < b >

  < td height = "28" valign = "top" > Contact No.: < table >

  < td > < input name = "contact" type = "text" size = "24" > < table >

  < /tr >

  < b >

  < td height = "85" valign = "top" > subject: < table >

  < td > < label > < input name = "category" type = "radio" value = "Appointment" / > appointment < / label > < br / >

  < label > < input name = "category" type = "radio" value = "Schedule" / > opening hours < / label > < br / >

  < label > < input name = "category" type = "radio" value = "Products" / > Products < / label > < br / >

  < label > < input name = "category" type = "radio" value = "Other" / > other < / label > < table > < /tr >

  < td height = "28" valign = "top" > Message: < table >

  < td > < textarea name = "message" = "24" cols rows = "5" > < / textarea > < table >

  < /tr >

  < tr > < td > < table > < td height = "85" valign = "top" >

  < br / > < img src = "captcha_code_file.php? rand = <?" PHP echo rand();? ' > '.

  ID = "captchaimg" >

  < br / > < label for 'message' = > enter the above code here: < / label >

  < br / > < input id = "6_letters_code" name = "6_letters_code" type = "text" >

  < br / > < small > can not read the image? Click on < a href = "" javascript: refreshCaptcha(); "> here < /a > to update < / small >"

  < table > < /tr >

  < b >

  < td > < table >

  < br / > < td valign = "top" align = "center" > < input type = "submit" value = "Submit" name = "submit" > < table >

  < /tr >

  < /table >

  < / form > < / center > < br / > < table >

  OK - I see what is happening. The script that determines the content of captcha also sets the session variable. To read this variable on the processing page, you need to enable sessions there too. -Change

  If (isset($_POST['submit']))

  on this subject.

  {if (! isset($_SESSION))}

  session_start();

  }

  If (isset($_POST['submit']))

  If there is an error of Captcha, you will also need to print that the visitor sees an indication that they do not have this right. There are several ways to do it, but probably the easiest is just to send them to the test to white form with an error message, so change that-

  Header ('Location: thank_you.html "");

  }

  on this subject.

  Header ('Location: thank_you.html "");

  } else {header('Location:captcha_error.html') ;}

  then create the captcha_error.html page that explains what that went wrong, with a link to the page of the form.

  See if that helps.