problem with re-installed at the plant of Vista, outdated browser not upgade
My laptop stopped working due to the failure of the hard drive and as a result of the corruption of files. I can't do a full backup with acronis. I replaced the hard drive and did a restore to factory State. Now I can not access the updates, can not update IE, couldn't run of Microsoft verification program to manually apply the updates in service packs, etc. I was not asked to activate Windows. It's a laptop Toshiba Satellite on the 2007 vintage.
When I try to access relevant Web sites of Microsoft, I tells me my browser is out of date, but I can't do an update.
Help, please.
Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx
If you have problems to receive the service pack from Windows Update, you can download SP1 as a stand-alone package from the Microsoft Download Center website, and then install SP1 manually.
Learn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx
If you have problems to receive the service pack from Windows Update, you can download SP2 as a stand-alone package from the Microsoft Download Center site and then manually install the SP2.
http://Windows.Microsoft.com/en-AU/Windows/search#q=Internet+Explorer+downloads
Tags: Windows
Similar Questions
-
I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek
We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact
-
Hello
I have a same problem of the nomination and please help me. Steam gives me this error: https://support.steampowered.com/kb_article.php?ref=2117-ILZV-2837 followed all the steps and the problem is solved just at the moment 24 hours Max tried to change the Windows 8.1 Professional with the company 8.1 of Windows and the same error... at last, I found what the PROBLEM... Steam do conflict with the killer e2200 controller Gigabit Ethernet (NDIS 6 h 30) .
Here is the spec of my laptop:
Processor information:
Vendor: GenuineIntel
Processor family: 0x6
CPU Model: 0x3c
CPU Stepping: 0 x 3
Processor type: 0x0
Speed: 2494 Mhz
8 logical processors
4 physical processors
HyperThreading: support
FCMOV: supported
SSE2: support
SSE3: support
SSSE3: support
SSE4a: unsupported
SSE41: supported
SSE42: supported
Network information:
Network speed:
Version of the operating system:
Windows 8.1 (64-bit)
NTFS: support
Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0
Video card:
Driver: NVIDIA GeForce GTX 860MThe DirectX driver name: nvumdshim.dll
Driver version: 9.18.13.4752
The DirectX driver version: 9.18.13.4752
Driver date: February 5, 2015
OpenGL Version: 4.5
DirectX card: NVIDIA GeForce GTX 860M
VendorID: 0x10de
Device ID: 0x119a
Number of monitors: 1
Number of logical video cards: 1
No SLI or Crossfire detected
The main screen resolution: 1920 x 1080
Resolution: 1920 x 1080
Main display size: 15.04 "x 8.46" (17,24 "diag)
38.2 cm x 21,5 cm (43.8 cm diag)
Main bus: PCI Express x 16
Primary VRAM: 2047 MB
Supported MSAA modes: 2 x 4 x 8 x
Sound card:
Audio: speakers (Logitech G35 Headset)
Memory:
RAM: Mb 16265
Various:
INTERFACE language: English
Microphone: Not defined
Media type: DVD
Total disk space: 310220 MB
More great free block on the hard disk: Mb 234051
Date of installation of the OS: January 1, 1970
Game controller: none is detected
Software installed:
Advanced SystemCare Ultimate 8
Alienware command center
Alienware on-screen display
Hello
Counter-strike: Global Offensive
Dolby Digital Plus Home Theater
EMSB
Game Booster 3
Google Chrome
Update Google Helper
Intel® Trusted Connect Customer Service
Intel (r) components engine management
Intel (r) graphics processor
Intel(r) Rapid Storage Technology
Intel (r) Wireless Bluetooth (R) (patch version 17.1.1449.356)
IObit Uninstaller
KMSpico v9.3.3
Logitech Gaming Software
Logitech Gaming Software 8,57
Microsoft Visual C++ 2010 Redistributable - 10.0.40219 64 x
Microsoft Visual C++ 2010 x 86 Redistributable - 10.0.40219
Microsoft Visual C++ Redistributable (x 64) 2012 - 11.0.61030
Microsoft Visual C++ Redistributable (x 86) 2012 - 11.0.50727
Microsoft Visual C++ 2012 x 64 extra TIME - 11.0.61030
Microsoft Visual C++ 2012 x 64 minimum - 11.0.61030
Microsoft Visual C++ 2012 x 86 additional TIME - 11.0.50727
Microsoft Visual C++ 2012 x 86 minimum - 11.0.50727
NVIDIA 3D Vision Driver 347.52
347.52 NVIDIA Control Panel
NVIDIA GeForce experience 2.2.2
NVIDIA GeForce experience Service
NVIDIA Graphics Driver 347.52
NVIDIA HD Audio Driver 1.3.33.0
NVIDIA installation application
NVIDIA LED Visualizer 1.0
NVIDIA network service
Optimus NVIDIA 17.12.8 update
NVIDIA PhysX
NVIDIA PhysX System Software 9.14.0702
ShadowPlay NVIDIA 17.12.8
NVIDIA Stereoscopic 3D Driver
Update NVIDIA 17.12.8
Updated NVIDIA
NVIDIA 1.2.27 Audio virtual
Overwolf
Qualcomm-Atheros bandwidth control filter driver
Qualcomm Atheros E220x killer drivers
Qualcomm-Atheros Killer Network Manager Suite
Qualcomm-Atheros Network Manager
Realtek card reader
Realtek High Definition Audio Driver
SHIELD streaming
SHIELD wireless controller driver
ST Microelectronics 3-axis digital accelerometer Solution
Start 8 menu
Steam
Surf protection
Synaptics Pointing Device Driver
TeamSpeak 3 Client
5.21 WinRAR (64-bit)When I try to attach cs'a go with my ping wireless network is 200-250 :(((
Please help me
Thank you!!!
Hello. I made this account just to meet you. I tried all the solutions, but my problem was solved after I uninstalled "iobit start menu 8 and iobit advanced system care ' completely and restart my computer. However, I'm also using Killer e2200 controller Gigabit Ethernet (NDIS 6.30) on my pc.
Can you reinstall the driver of e-network killer and all iobit software uninstall your PC and tell me if your problem is solved? I will wait for your answer. Thank you.
-
When I try to install a software, I get the message that "windows service install could not be accessed. This can occur if you are running Windows in safe mode or if windows install is not properly installed. Contact your assistance support team '. " I'm not in safe mode. Help, please. How can I fix Windows install? I have Windows XP Home Edition Version 2002. I have SP2.
Please download and install: Windows Installer 4.5 (WindowsXP-KB942288-v3 - x 86 .exe)
-
original title: Itunes problem
my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?
Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.
Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.
(Vista 32-bit or 64-bit)?
-
Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200
I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!
Since the issue is updated to Windows, it is not a product number key.
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
-
Cannot open Word or Power Point Error 1719 also have problems with Windows install.
OT: problem.
Hi all
I used ccleaner, after finishing, I was not able to access to word or ppt... I am getting error 1719 and problems with windows install and I got dnssd missing dll, but I put one in Wow64. I really don't know where the problem lies... I tried everything from softbooting to sfc/scannow... I have windows 7... I copied the log on the desktop and I noticed this repetition:
CSI 0000032 b [SR] could not check component of 6968173078fa737442bd424a51db3e21 files, Version = 11.2.9600.16518, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, neutral, TypeName neutral, clear PublicKey is damaged (REAL)but I do not understand... Someone help please urgent.
I used ccleaner
-> Why would you do that? CCleaner is known to cause problems!
After finishing, I was not able to access to word or ppt
->, You might be able to repair the damage with the system restore. It allows setting up Windows to a point before using CCleaner.
-
Problem with PSE - 2 and the new 1.5 TB drive
Hi all. First of all, I use my PSE - 2 recorded for several years without problem. AMD Athlon 7750 2.7 Ghz, 2.0 G memory bicoeur. WD 1 .5TB primary and WD 500 GB secondary drive. Win XP SP3. I recently had a disk fails and installed a new freshly formatted WD 1.5 TB as my boot drive. New installation of Windows XP and updates. When I install the elements, it now seems to install fine. The problem comes when I try to run the first time that I get "could not initialize Photoshop Elements because scratch disks are full '. Then elements shut, not allowing no not me nothing to do with configuring internal program. I tried unistalling and installing on the 500 GB drive, but still not the same error. I increased my page file memory does anyone know of a problem with the installation of the elements on a large drive or can anyone offer a possible solution to what I see? Thanks in advance for suggestions...
JohnR.
I think Barbara meant photoshop 7, which was a little before pse2.
If you hold them Alt + right Ctrl keys after starting pse2, a dialog box
should appear allowing you to choose the drive working (keep holding
keys until the dialog box is displayed)
If you have a recovery partition on your hard drive, try this to choose
the drive working, then exit pse2. Then restart pse2 and
Preferences > Plug-ins and Scratch Disks choose your hard drive regularly to the scratch disk.
Newer versions of the EPS, the newer less than 3 or 4 don't seem to have this problem.
MTSTUNER
-
Problem with silverlight download, download the error code 2104.
Original title: problem with Sliverlight download
get the error code 2104. tried to uninstall and reinstallHello
Thanks for the reply.
We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.
-
I have problems with my application of the java language.
I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.
Hey Kevin,
The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.
I would really appreciate if you could answer the following questions:
1. is the specific question of the application of the Java language?
2. did you of recent changes made to your computer before the show?
3. you receive an error code or message?
Please provide us with more information on the specific question to help you to fix as soon as possible.
If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:
http://www.Java.com/en/download/support.jsp
Java Help Center:
http://www.Java.com/en/download/help/
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
I have problem with value NULL when the use CASE statement please help this question
I have problem with value NULL when the use CASE statement please help this question
Table: digital_val
SNO cl C2
1 San1 11
2 22 San2
Actual result: expected to A B
A B 11 22
11 NULL
22 NULL
query:
Select case when c1 = "san1" then c2,.
case If c1 = "san2" then c2 B
of digital_val
I'm more curious why, when you select 2 rows, you expect a result of row?
WITH digital_val
AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)
UNION ALL
2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)
SELECT CASE WHEN c1 is "San1" THEN END AS A c2.
CASE WHEN c1 = "San2" THEN END AS B c2
OF digital_val;
With no other input, if you select 2 rows, you get 2 rows. One of the other solutions use a max function, but is this really what you want, does not specify?
-
problem with bind variables in the SQL query view object
Hi all
I use JDev 11.1.2.4.0.
I have a problem with bind variables in the SQL query view object.
This is my original SQL
SELECT sum(t.TIME) , t.legertype_id FROM LEDGER t WHERE t.nctuser_id = '20022' AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929') group by t.legertype_id
In my view .xml object query tab, I am writing this
SELECT sum(t.TIME) , t.legertype_id FROM LEDGER t WHERE t.nctuser_id = '20022' AND to_char(t.insertdate,'YYYYMMDD') in :dddd group by t.legertype_id
Davis here is a variable of Type liaison: String, updatable and necessary.
I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.
But failed. The view object retrieves 0 line after that I run.
Why?
Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')
A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.
Timo
-
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
Thank you
PeterHello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.====================================
Or you can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.
1) update your nVidia/software drivers to the latest version for your model video card + operating system.
(2) check that the equipment is not defective.
This is not a Microsoft / number of the operating system. For additional troubleshooting - contact the manufacturer (nVidia).
-
IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks
Hello
Thanks for posting the question in the Microsoft Community!
You can't use the wireless connection and the message that the DNS server is not responding.
The problem may occur if the computer is unable to connect to the DNS server.
To check, I suggest you follow the steps:
Method 1: Re-register the DNS
a. Click Start. Type cmd in the search box and press ENTER.
b. at the command prompt, type the following command and press ENTER:
ipconfig/flushdns (there is a space between ipconfig and /)It will display the message properly emptied the cache of DNS resolution.
c. at the command prompt, type the following command and press ENTER:
ipconfig/registerdns (there is a space between ipconfig and /)d. at the command prompt, type the following command and press ENTER:
ipconfig/all (there is a space between ipconfig and /)
The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
If this is the case, try this:i. enough at the command prompt ipconfig and press ENTER
II. ipconfig / renew in command prompt and press ENTER
The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)
Method 2:
a. click Start and then click Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. choose the DNS server to obtain an address automatically , then press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
Maybe you are looking for
-
FPGA FIFO (reset and stop) release
I have a question regarding the release of FIFO. In VI, I use for the collection of data through DMA FIFO, before collecting all loop, I use FPGA reset and after the while loop, I use FIFO.stop. I have attached the picture. However I think it is t
-
HP ENVY 4522: Recommendations of the thickness of card
Hi all Can anyone recommend what the limit is on the map of paper/thickness? I tried 300 g/m², but is not pulling the card to start and accordingly the print appears longer bottom on the map. I plan on trying 275gsm then and slowly moving down until
-
How to close the open window by Exec VI system automatically?
Hello I use the Exec VI system to launch an exe that is built from a LabVIEW program. Operational system Exec VI, the window out of file exe and stays there even after all the tasks are completed. I have to close it manually each time. Anyone here kn
-
What should I do to fix this? Be aware that I do not know it here.
-
How to get replacement for Windows software
original title: get a CD of Windows Vista Home Premium x 32 to reinstall the software on my PC corrupted who does not run correctly. I need to know how to get a replacement of Windows Vista Edition Home Premium x 32 CD so I can reinstall Windows on m