Problem with Swipe Horizontal only

Similar Questions

• Problem with access: local only for wireless in Vista

  A few weeks ago, we got a new router at home. It works fine, but a few days ago, my computer suddenly could no longer access the internet wireless on this subject. (He had been able to before). Other computers in the House can use it for the wireless, and my computer can get on the internet by cable. My computer can also access wireless to other places, but not at home, and more.

  So far, I tried everything what I found on the internet to solve the problem without success. I tried:

  1. the solution proposed on this page http://support.microsoft.com/kb/928233.

  2. make sure that windows is completely updated.

  3 disable IPv6 and IPv4 (although not at the same time).

  4 turn off the power management feature that allows the computer to turn off the wireless card.

  5. disabling and re-enabling the network card.

  so far, nothing has worked. Can someone, please?

  Hello

  In most cases, this problem is created by the problem with wireless security.

  Try to connect with the security temporarily turned off.

  Or firewall blocking local traffic.

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Problem with Textfield autocomplete--> only use the INSTR function

  Hello team dev,
  
  I use the new "textfield autocomplete" item type APEX and you have a crazy problem with it.
  
  I have a table with an index on the same column I want to search with AutoComplete field.
  
  Index:

  CREATE BITMAP INDEX TEST.GEO_DATA_IDX1 ON TEST.GEO_DATA (postcode)
  NOLOGGING TABLESPACE TS_INDEX;

  Select which is automatically generated by APEX 4:

  SELECT   a.*
    FROM   (  SELECT   DISTINCT postcode AS RV
                FROM   TEST.GEO_DATA
               WHERE   country_id = :P1_COUNTRY
            ORDER BY   1) a
   WHERE   INSTR ("RV", :p$_search_string) > 0 AND ROWNUM <= :p$_max_rows;
  
  -- plan
  Plan
  SELECT STATEMENT  ALL_ROWSCost: 4,308  Bytes: 45,31  Cardinality: 1,97            
       2 SORT UNIQUE  Cost: 4,307  Bytes: 45,31  Cardinality: 1,97       
            1 TABLE ACCESS FULL TABLE #TABLE# Cost: 4,306  Bytes: 47,311  Cardinality: 2,057  

  The APEX 3, I used the addon of Tyler Muth with my own Select:

  SELECT   DISTINCT
              postcode AS DV,
              postcode AS RV
       FROM   TEST.GEO_DATA
       WHERE   country_id = L_COUNTRY
       AND    postcode like l_search||'%'
       ORDER BY 1
  
  -- Plan
  SELECT STATEMENT  ALL_ROWSCost: 840  Bytes: 152,867  Cardinality: 13,897                                
       8 SORT ORDER BY  Cost: 840  Bytes: 152,867  Cardinality: 13,897                           
            7 HASH UNIQUE  Cost: 838  Bytes: 152,867  Cardinality: 13,897                      
                 6 VIEW VIEW index$_join$_001 Cost: 836  Bytes: 232,111  Cardinality: 21,101                 
                      5 HASH JOIN            
                           2 BITMAP CONVERSION TO ROWIDS  Cost: 31  Bytes: 232,111  Cardinality: 21,101       
                                1 BITMAP INDEX RANGE SCAN INDEX (BITMAP) #INDEX#
                           4 BITMAP CONVERSION TO ROWIDS  Cost: 45  Bytes: 232,111  Cardinality: 21,101       
                                3 BITMAP INDEX SINGLE VALUE INDEX (BITMAP) #INDEX#

  Is there a chance to get my INDEX used by the new element of the APEX? I do not. But I still want to ask before I just rebuild. :)
  
  Best regards
  
  Tobias

  Hi Tobias,.

  I guess that you are currently using "contains and case sensitivity ' to the attribute of"search ". Have you ever tried out "Exact and case sensitivity? Because that internally uses the LIKE operator as does your original query and the % is at the end, she must allow the use of an index. But it might still work, because ORDER BY can be run at a different time in your original example, but it's worth a try.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• T420 Bluetooth problems with file transfer, only restart fix

  Hello everyone I have the most current drivers and BIOS by system update. I lit BT with FN + F5 and began to transfer some photos from my phone to the computer. After the second or third file the phone indicates that the transfer failed and transfer more files. Can I transfer pictures from the phone to my T400.

  Then, I got another phone with BT to see if it might be at the computer. This phone has not been associated with my machine, I went in parameter BT and turned on "Allow Bluetooth devices to find this computer". Windows introduced an error message indicating that the settings have not changed and the BT unit is maybe unplugged.

  According to FN + F5, the BT is. I tried to switch off the BT by FN + F5 and then on aging after a short wait. I got the same error. I tried power cycling the hardware network switch. Same mistake.

  Restarting the computer is a temporary solution, but I can only transfer files from 2-3 before that it happen. I hope there is a solution to this problem that does not require me to buy a cable to transfer files between my phone and computer.

  About a week after I posted it there new drivers and BIOS update available. I installed this and everything seems to work fine now.

• Problem with setting "Horizontal scrolling with tilt wheel"

  All of a sudden, everytime I open a spreadsheet it acts as if I am pressing the arrow button to the right and the active cell moves to the right as quickly as possible.

  At the same time:
  1. my wireless Microsoft mouse leave with the scroll wheel.
  2. when I click a down arrow, the menu is displayed for a split second, then disappears.
  Any ideas what may have caused this?
  * original title - Excel-unstoppable to the right at the opening of automatic pagination

  1 only with Excel

  2 Microsoft 6000v2.0
  3. since Monday morning, when I opened a spreadsheet
  4. the system changes. I didn't touch anything.
  5. the keyboard is clear. It only happens in Excel.
  I managed to do stop by disabling "horizontal scrolling with tilt wheel" in the mouse properties. Absolutely, I know for a fact that nobody changed this setting, but it became somehow activated.

• Problem with video card only detect audio TV (no passthrough) via EDID

  See this old marked question 'Answered' when it was clearly not: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/problem-outputting-51-surround-sound-via-tv-to-a/2edeb051-46d8-4428-81d9-23782ad12543

  Here are once again this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/unable-to-configure-hdmi-multi-channel-audio-only/dad9204b-0855-4cda-95c7-c586ac6a2503

  This question has been around for three years without any company, address. In a common home theater setup, I have my geforce 650 connected to my TV via HDMI, and my TV is used as a relay to my receiver via an optical connection 5.1.

  Now, if I use my Xbox 360 in exactly the same setup, I can simply force the 360 to output 5.1 despite being inherently stereo TV sound. However, Windows (with the geForce card) only detects the audio setup of your TV EDID and allow only native stereo output.

  The fix to play media using a third-party player (think VLC) to manually select audio output; However, this does not have any other way to get audio, such as games or internet streaming.

  A simple option to choose out of I want advanced would be greatly useful in sound options instead of force to choose only a possibly erroneous detection.

  Thank you.

  Hello Zach,

  I suggest you to report your application in the Windows's community of Experts for assistance on this issue.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/87.aspx

  It will be useful.

• Problem with "Pan" effect only

  Hello

  I have a scrolling content using the pan only. ASM at the end of the series of scrollables WHO became smaller. I got this first work fine, but now I get the same frustrating problem even after I recreated the entire process and reloaded a new article. I'm in a tight schedule and I have to work on 200 more content with a features like that. How can I solve this problem? What causes this behavior? And how can I avoid this happening again?

  Kind regards

  Mikke

  

  The only time where I see shrivelled in an MSO or frame scrolling is when the overlay is created on the editing table and then. Have you created the object shrivelled on the pasteboard?

• problem with the work only half of the extended keyboard

  have had 2 keyboards with the same problem. They both lost the use of the middle of the keyboard section.

  I would like to test the 2 keyboard in another computer, it doesn't have to be a mac, that a windows box works very well with the mac keyboard

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to fix audio problems with some codecs only?

  Dell Optiplex 7010 bought in January, Windows 7 SP1 with all updates.

  Sometimes during the month, I started to notice that some videos audio was very low and others had very distorted audio. This occurs when streaming video during playback of downloaded files and YouTube etc. A few videos where the sound was fine when I downloaded them are now distorted.

  Other records and videos are fine, normal levels, no change by when I downloaded them.

  The problem is not specific to any video site, player or plug-in. I can confirm by playing the same thing on other devices that the problem is not in the stream or file. So it seems that this must depend on which codec is used. This theory is supported by videos from the same source, generally having the same problem, or no problem.

  I updated the Dell RealTek audio drivers, uninstalled them and used the generic Microsoft drivers, installed the RealTek drivers.

  Audio troubleshooting of Windows detects no problem.

  Disable sound effects has no effect.

  Any suggestions on what else to try?

  I guess I should install a 1394 PC card, plug my PreSonus audio interface and see if that has the same problem.

  Here are some examples:

  • normal: https://www.youtube.com/watch?v=CvNGpdPdQCk
  • Audio clean but the level is about 10% of what it should be: https://www.youtube.com/watch?v=gX3jxkozqd8
  • level normal but distorted and voice is unintelligible: https://www.youtube.com/watch?v=eNPeOnsxICw

  Never mind. The problem is in my hearing.

• Problem with player search - only the First Instance is highlighted

  I use WIN 8.1 with Adobe Acrobat Reader DC [15.10.200056.167417 'updated 12/18/15"indicated in the program properties] as my default PDF reader.

  Until recently, I was able to do a search of words/texts of .pdfs using CTRL-F, who showed me every instance highlight of this word.  I would simply hit 'find' several times.  These days, only the first occurrence of the word is highlighted.  Along the right margin are yellow "tics" that, in my opinion, indicate the existence of other occurrences.

  If something has changed in the drive?  Some can tell me how to regain the ability that I hope

  mikec2222 wrote:

  Bernd - Do I understand you though, when you search for "" this document, you can find a second occurrence of "the" highlighted by pressing 'find' or 'next' or 'enter' again?  If this is true, my copy of AA CD player must be faulty.  I can't wait to see your response.

  It's true.

• Problem with graphic restores only not to export

  Hello

  I am currently working on assembling together a portfolio using InDesign. I decided to implement a graphic behind the text of each page, but for some reason section any, that it does not show the export. However, this occurs only when you view the document on my MacBook - when I'm on my laptop Windows 8, it shows. Even using the exact same export file.

  Anyone know the reason for this? I don't know if it of my .pdf on my MacBook Viewer settings or not.

  I downloaded the .pdf and here .indd files:

  .PDF http://au.haneuri.NET/jakecohen/drawing%20Programme.PDF

  .indd http://au.haneuri.NET/jakecohen/drawing%20Programme.indd

  This is my first post here, so I hope I write correctly!

  Thanks in advance,

  Jake Cohen

  See with what application? Anything other than Acrobat or Reader

  is a total crapshoot. Overview of the Mac is especially annoying with

  something other than plain vanilla PDFs.

• Problems with the horizontal navigation bar Spry in IE

  Considering that the page is perfect (at least all I like) implemented in all other browsers, IE converts the spry horizontal navigation bar in vertical position. Not very practical, and I spent day (really) try to find a solution. Even contacted Microsoft here in Norway, but they are their usual me useful (i.e. not very).

  A solution is of course to use a flash homepage and tell visitors to get a decent browser (as in NOT IE), but that might be a little off.

  Would be best to find a way around the problem.

  The page is here: http://www.writeone.net/Futaba/newFutaba.html

  Any suggestions or solutions?

  See you soon,.

  James

  Spry menus have integrated many hacks for IE.  When you make radical changes of styles of Spry menus without understanding what it does, it is inevitable that something will break somewhere in the chain.

  Please read these links:

  Menus Spry 10 commandments

  http://www.dwcourse.com/Dreamweaver/ten-commandments-Spry-menubars.php

  Fixing of the Menus Spry 1.6.1

  http://www.Projectseven.com/testing/Adobe-bugs/Spry-menus/

  Nancy O.

• I have a problem with Windows accepts only not the connection password.

  Original title: why have I lost my windows login password?

  Hello
  It's strange. Suddenly, I found that my Windows 7 login password is more accepted. Of course I made sure that caps lock is not on, typed correctly, etc. I have made no changes in the system and have had the same connection for more than a year.
  I restored it with system restore (good to enter Safe Mode was not easy... topic for another time).
  So now I'm back to normal and created a password on a flash drive recovery disk.
  But, why or how would it happen?
  Very curious.

  Thanks a lot for your suggestions.

  Jack

  If you were able to get in Mode safe without logon then automatic logon mode must have previously been activated.

  To find out what happened to your password you could do this:
  1. Log in under your spare admin account.
  2. Click on the globe to start, and then type the three letters cmd into the search box and press ENTER.
  3. Enter the following command and press ENTER:
     NET user 'Jack '.

  The command will tell you everything about the account of Jack, for example when the account of the last use and what was his password has changed. This implies, of course, that you have a fully tested alternative admin account. Having one would have saved you perform a system restore, even as having a spare House key removes the need to break a window...

• Problem with GREP - find only the 1st occurrence

  Hi all

  In the example below, I'm trying to find the text between pairs of characters $ .

  

  Theoretically, it should work - \$\s.+?\s\$ - but in practice, he finds that the 1st instance. I can't understand why.
  
  It is interesting in JS, this phrase works as expected.
  I select text and run the script:

  Main();
  
  function Main() {
      var doc = app.activeDocument;
      var sel = app.selection[0];
      var contents = sel.contents;
      var match = contents.match(/\$\s.+?\s\$/g);
  }
  

  And it returns all occurrences of four:

  

  What I am doing wrong?

  Thanks in advance.

  
  Kas
  

  We could improvements, adds Adobe InDesign GREP and now the character $ gets a little hackneyed. He did likewise for me (only find 1 here), but I got it to work using

  \x24\s.+\s\x24

  (where "\x24" is the hexadecimal representation of "$").