Problem with the configuration of the router

Similar Questions

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Several problems with the router WRT110

  First of all, the router disconnects randomly. As in, the router stopped broadcasting and will not be displayed on the list of the available when it arrives. When this happens, no wireless device cannot connect until the network resets.

  Second, whenever a wireless COMPUTER connects to the network, all network connections are lost for 5 to 10 minutes. However, this does not work when I connect other wireless devices to the network, such as my XBOX 360 console.

  Why does this happen? I'm tired of the random disconnection!

  Make sure that all Vista and Win 7 computers have IPv6 disabled under the properties of the LAN parameters for each card.

  WRT110 should have firmware version 1.0.04)is ou.05.  Disable UPnP in router.  Settings wireless Beacon Interval 75, threshold RTS and Fragmentation 2304, channel 1, 6 or 11.

• [WRT1900AC] Problems with the subtitles (.) (SRT) with. MP4. AVI and others. MKV videos

  Hello

  I use the WRT1900ACS 2.0.0.173388 firmware and I noticed a few videos with. Just SRT subtitles does not work on my smarttv via DLNA server.

  I have some MKV videos with. The SRT subtitles I can perfectly look through DLNA, but. MP4. AVI and others. MKV seems simply do not find subtitles.

  All of these videos with. SRT subtitles, I can watch properly on my Mac or directly into the USB port on the TV, which seems to clearly be a problem with the router or some settings.

  I tried to rename the extension of the file from. MP4 and. AVI to MKV, but also did not work.

  Are there other settings that I can do?

  I suggest you use a software of 3 rd-party, which we are not trained for, that can integrate the file of external subtitles for YouTube videos. Media Server is a router feature that will allow you to stream multimedia files to your DLNA or active UPnP devices within your network. With this, external subtitles as SRTs file may or may not be detected because it is not a file of DLNA support.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• problem with the configuration of the channel of width 40 mhz on Aironet 1141

  Hello

  recently we bought the model cisco aironet AIR-AP1141N-E-K9 stand alone.  After you have configured it, customer has no problem with the connection and the cover, but there is problem with passage. clients are unable to connect to higher rates, even if I set the width of the channel to 40 mhz, the maximum for compatible client device N rate is 54 mb. 

  can someone give me some advice how to fix this?

  This is my setup, or see attachment file

  http://pastebin.com/1WHeSvmq

     

  Thank you very much

  Please change the encryption used by AES.

  Here's more information: http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml

  THX //art

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• problem with the configuration of the Windows on Windows 8 updates

  hated, I an asus X553M I think its name everything was fine but but now ever time I'll start up it goes to black screen (lack of configuration of windows, undo changes updates off your computer), then it will reboot, but it just back upward with the failure to set up the screen and it continues to is time and time again iv tried everything I have photos on the laptop that are too important to lose is there a way I could get him...

  Original title: help

  Hello

  Thanks for posting your query in Microsoft Community.

  I suggest you to start from the installation media and then Auto repair and check if it helps.

  Method 1: create installation media.

  Check out the following link to create an installation media for Windows 8.

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Method 2:

  Step 1: auto repair

  See the next procedure to start on the installation media and auto repair

  1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

  2. In the next screen, click on the Troubleshooting option, you WinRE (Windows Recovery Environment) different options to solve the problems with the computer when it is in no State to start is displayed.

  3. Now click on repair automatic, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Step 2: System Restore

  See the next procedure to start on the installation media and perform the system restore.

  1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

  2. In the next screen, click on troubleshooting option, allows you to display different options of WinRE (Windows Recovery Environment) to solve the problems with the computer when it is in no State to start.

  3. Now, click on the system restore, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Hope this helps, please let us know if you have further questions about Windows.

  Thank you.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/