Similar Questions

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• Problem with the controls volume/internet on my laptop HP HDX 16

  Hey,.

  I have a laptop of HP HDX 16, around the age of 8 months. I keep having problems with the touch buttons that controls volume, bass/treble and the internet. The buttons randomly disappear by themselves, turn on and off Alternatively my volume/bass/treble from top to bottom and my internet.

  I have updated the drivers for the buttons to quick launch without result. I've also just updated my computer to Windows 7, so my Bios is brand new (the problem started before I updated to 7).

  As you can imagine, get my internet randomly stops and for the black volume screen blocking what I was doing and hang my computer is getting pretty annoying. Any help on this would be surprising.

  Thank you
  Printertron

  I also have the same problem. HDX 16, around the age of 3 months.

  I found to do all sorts of updates the driver, uninstall, System Restore (no), and does not help.

  I'm still on Vista, but when I get my kit to upgrade to Windows 7, I had planned to see if it resolved the problem.

  Technical support HP told me that if a recovery does not resolve the problem, it must be delivered to them, and the band of totality quicklaunch may have to be modified.

  I intend to make the recovery during the holiday season.

  Based on the fact that you got your computer 8 months ago, I assume that you have not used an upgrade kit. Which means, I would recommend doing a recovery before calling the technical support because they will just have to insist that you do anyway.

  An interim solution, when the volume control locks your screen is at the end of the process called "SmartMenu.exe". It will reload the next time that you start your computer.

• Problems with the condenser after the recent update tool

  We have problems with the condenser so tool. The filter works correctly, but after a 'white' to use (looks like most exposed) rectangle remains in the image that cannot be deleted. We tried different layer modes without success: it does not react or the rectangle disappears but both the effect of the filter. Seems to be a bug (?) - Please help us as soon as possible. Thank you!

  Hi meuschke,.

  Our engineers are working on this issue, in the average as you try the below work around.

  After you change a 16-bit image using the Liquify Filter, edited areas are lighter than the rest of the image.

  Solution

  In the meantime, there are two solutions:

  Use pictures 8-bit instead of 16-bit images with fluidity

  Disable the GPU use to liquefy holding the key Option (Mac) or Alt (Windows) key down while you select the Liquify Filter in the menu filter.

  Related link: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Problem with the drivers after changing Vista-> WinXP on R61i

  At first I want to mention that I am new to this forum and my native language is not English (sorry for the mistakes of language).

  Computing: Lenovo R61i 8943 g

  Foreplay:

  In the new computer Windows Vista has been installed, but I decided to switch to a Windows XP Professional.There had a few issues with the SATA controller (computer has no floppy drive). After all, I managed to install a new system.

  Description of the problem:

  I can't install the drivers to the computer (internet does not - same wired: ethernet, there is no sound, etc.) In Control Panel-> system-> device-> devices Manager there are yellow questions marks (with small exclamation points) around: network controller, PCI Device, unknown device (what is?), video controller, and video controller (VGA compatible).

  There is no CD that came with this computer, so I tried to find the necessary drivers on the internet.

  On the page

  Lenovo, drivers and downloads support

  I chose [network] to refine the results (first I want to activate ethernet Internet connections) and clicked on

  Broadcom NetLink Gigabit Ethernet software for Windows XP - ThinkPad R500, R61, R61e, R61i

  There is a file 7yra02ww.exe. At the last moment of the installation, the following window appears:

  Broadcom NetLink Gigabit Ethernet Software for Windows has encountered a problem and needs to close. We are sorry for the inconvenience.

  I don't know if I tried to install the appropriate driver. After I tried to install Access Connections (think Vantage Technologies) of

  ThinkVantage Access Connections for Windows XP, 2000-computers portable, but it also fails.

  Could someone help me what to do (what drivers to install and how)? Thank you in advance. Matthew.

  Thank you, Tim_Lenovo. My second post was about a possibility of making the easy instalation, but no one answered. Thanks - next time I'll use the system update

  I don't know what you got almost everything square away exactly means (I'm not so good in English), but I think it speaks of my redundant work.

  And the solution of my problem is very easy! I installed what it takes and just use the control panel-> power-> advanced options. (I think that my mind needs a rest!). In device manager there is a yellow question mark on unknown device (without power management there are two unknown devices without driver), so I thought that I need an additional driver. That's why I was always looking for appropriate software. A solution was so close to me

  I hope that the system update helps a lack of driver for a device unknown (I wonder what it is).

• Problems with the files after upgrade of Sierra

  Installed at Sierra 10.12 4 days ago on my 2010 IMac running Lion 10.7.5 did not a specific backup on the hard disk running on time machine assumes that the last backup should be sufficient.

  1 problem is that my 15 000 pictures present date instead of filing in the events as they have always been.

  2 mail seems lost several mailboxes that I had installed in the margin to quickly drag and drop INFO and interesting technical questions.

  3. I have a stream of photos don't drop-down after a few days, which will not go away it just keep reappears not no this that I still need it for.

  4 never used the cloud but considering buying iPad and dumping of my old Apple laptop not likely with the capacity of 128 GB.

  A year ago, Apple went from iPhoto to the new Photos app. If you have questions Photos I would re-post in this forum. Can be found the link to it by clicking on the Photos for Mac

  About your mail, try to rebuild your mailboxes and if this does not work, you may have to re-create the mailbox store that you had previously.

  On the planned purchase of an iPad, you have a question or was it just a comment?

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Satellite P200 - 14 H - problem with the software after reinstalling Vista whindows

  I have a Satellite P200 - 14 H, who bought systems Activ of Romania. I got a Toshiba DVD with an image pre-configured Windows and my driver's license windows vista Home premium. After several blue screens windows crashed after 5 days. It was a software problem. I am a network administrator and I need several virtual machines Linux vmware server Windows.

  The DVD provided with the laptop is not really suited to my needs to reinstall windows because it throws my entire hard drive and is not an option. I took a friend a DVD windows vista Home premium and using my key from the sticker on the back of my laptop I reinstalled win without deleting all of the hard drive but only the partition c. I downloaded all the drivers of your site even if I found them really hard (model PSPB6E because that model PSPB6E I don't find it anywhere) everything is good except that "Flash Cards Support Utility" and «» Hardware Setup' give me the following error: "serial number is invalid '. I don't know what to do to be able to use the function keys I knew which are installed by 'Flash Cards Support utility'.

  If it is not good that I did give me another solution that does not need to wipe entire HARD drive, but only the C drive and use the DVD that you have provided or give me access to some place to be able to download all the drivers and software that can be found on the original DVD (those above and to burn DVD and Norton internet security center and so on)

  Thank you very much and please be so kind to give me a solution quickly because I really need this computer and I am unable to use it.

  Hi Adrian

  I'll try to clarify a few things;
  First the drivers for Satellite P200 - 14 H PSPB6E series are placed on the page of Toshiba Europe and it of really not difficult to find.
  Secondly the Vista serial key, which is located on the bottom of the unit cannot be used with another copy of Vista OS! This will not work!

  You have installed the operating system Vista from the CD to friends, but you used a serial key that does not match with the Vista on CD to friends! As a result, you get the message error "serial number is invalid!"
  The utility of Flash cards is required to use the keys FN under Win Vista. It visually shows the use of the FN button.

  I would recommend another way of installation
  First, you must use the DCD from Toshiba recovery. Back up your data first!
  Then after installing the OS, create a new partition and install your favorite OS (Linux, XP, etc.)

  If you n t to use the Toshiba recovery but CD the original Microsoft CD Vista then you need to use the original series OS key that belongs to the MS Vista CD.

  Good bye

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Problem with the resolution after the installation of the Nvidia Gforce 105 on my laptop Driver.

  Hello, recently I installed nVidia - showing - NVIDIA GeForce G105M I downloaded via Windows Uptade. After that my only possible resolution is 1024 x 800, that looks really bad on 15.6 laptop screen.
  I can't uninstall this uptade because I simply he see in "Programs and features" Menu in the control panel. What can I do? What is the problem? Why Windows Uptade crushed idyllic mine working on my laptop, I thought uptades via Windws Uptade are reliable.

  In Device Manager, roll back the driver, then in recommended winupdate settings turn off updates.

  All the necessary drivers for your laptop must be obtained on the laptop computer manufacturers site. If roll back driver does not help, reinstall the drivers from your laptop manufacturers site

• problem with the control panel.

  I have a laptop with win7 32 bit. I installed 3 days ago and yesterday when I want to go in Panel said that Explorer Windows has stopped working. Except that everything works perfectly.
  I don't know what to do, I tried everything. I did the test of memory, I checked all the files *. Cpl, I scan the viruses and malware (I have kaspersky internet security), I put the control panel to show me that I can access the options menu, it does not work, I tried to install the patch 296 934 and he said something like that is not suitable for the operating system... I'm desperate, I don't know what to do.
  Can you help me please?

  Please excuse my English.

  IF it works in safe mode, you can use a clean boot to diagnose what is causing the problem. It won't take long to test.

  Another thing to try is to create a new user profile and connect through that to see if a new user can access control panel. You can delete the new account if it is not helping, or transfer your data to the new account if it helps.

  You might also consider trying a repair to re install - install windows 'above' of your existing system which should NOT replace your existing installation or data.

  Or, if this happened recently, you could try a system restore to a point before the error occurred.