Problem with the HP printer Installation.

Similar Questions

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

  PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

  I always get the same message!

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• Problem with the downloaded file (Installer cloud creative)

  I reset my computer and upgraded to Mac OSX 10.11.4. I downloaded Creative Cloud Desktop install but in the middle of the stage 'Download', I get an error 205 "it seems to be a problem with the files downloaded.". I checked the firewall and connectivity issues and everything is ok. This is just like the installer is corrupted.

  Clear Tmp folder.

  Make sure the option "use FTP mode passive mode" is unchecked in the proxies tab.

  If you are using a wireless or Wifi Internet connection, try wired Ethernet connection.

  Always the same? or who already use the wired connection.  Try live delayed creative cloud Installer.

  N ° 1)

  Click on below link and download page of 6 CS open, do not download anything from there, just keep it open.

  Download Adobe Creative Suite 6 applications

  Step 2)

  Click on the link below and download file CC to install offline DMG and use them to install the desktop CC app and check.

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_6_0_248.dmg

• HP LaserJet 4100: Problem with the universal print driver

  Desktop: HP Envy 700-214

  OS: 10 64-bit Windows

  Printer: HP LaserJet 4100 (with a USB to parallel cable)

  I was able to properly use my LaserJet for Windows 8.1 through my Windows 10 crossing (which I upgraded to about 18 months ago).  Quite recently, I welcomed Windows Installer a upgrade, and at this time there, I lost my ability to print.   It has been on my default printer, but gave an error message when I tried to print.

  I tried to "Add a printer" and selected the HP 4100 connected to the LPT1 port.  It would not print a test page, and the printer does not like in the reception of data.

  I then tried to install the (PCL6 and Postscript) universal print driver with similar lack of results.

  I tried uninstallinDeg and reinstall the drivers, but once again no joy.  Incidentally, although I'm going to Device Manager > printing queues and remove the drivers, when I set up an application like Word and select the Menu printing, many copies of drivers rest yet.  When I go to remove them using the printui/s/T2, it is said that they are currently in use and cannot be deleted.

  Yet once again, I repeat - it is not a hardware problem because everything worked well before Windows upgrade.  I just need to find a way to reinstall a driver who will speak to my printer.  It of frustrating because I was able to do that before, but may not know what I am doing wrong.

  Thanks in advance.

  Hello GaryLynn,

  You saw did a lot of things to try to solve this issue.

  However the USB to parallel isn't anHP officially supported connection type.

  in any case, what suggests I´d, is that you try this:

  • Unplug the hybrid cable that you use
  • Uninstall all copies of the printer and its duplicates.
  • Stop the print spooler by using the services on windows (type on cortana services.msc) locate print spooler and stop it
  • Go to run and coil type, look at the Printers folder and delete all the files that are there (if any)
  • Restart the spooler to print services.
  • Download and install this driver package
    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=FP-148007-1
  • Turn on your printer and connect the cable.

  After this exercise, check to see if windows 10 has managed to find the best driver to use your printer.
  If widows did not automatically find it, try the manual on add a Printer Wizard.

  If not reading as LPT1, check ports either USB00 ' # ' or a port DOT4, those who should be the ports to use.

  I hope this helps you get your printer going again.

  Thank you

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• Problem with the new printer print only some word from the quarterdeck documents

  I hope someone can help. I have a Dell Vostro and had 8 happy years print on a Canon printer. I just upgraded to a Canon Pixma iP4600 printer. I think that with some (not all) MS word documents it prints the rear tray (mean't for photo paper) by opposition to the tape before (designated for plain paper), for which I set the properties of the printer.

  Canon tech support say there is a Windows problem. I already reinstalled the printer driver but sill the same problem. Hope someone can advise.
  Happy Days!
  Bryan

  Hello
   
  This phenomenon only occurs with word documents?
  Have you checked if this happens with any other application?
   
  As you have already defined the properties of the printer and the problem is only with a few word documents. The first step would be to check if the word printing settings are defined in law.
  To fix printing on word problems, see the steps mentioned in this link:
  http://Office.Microsoft.com/en-us/Word/HP051887411033.aspx
   
  Sometimes this also happens if the printer settings are ignored when you print a Word document. To check if these settings are correct, try the steps mentioned in this article: http://support.microsoft.com/kb/904805
   
  If you still find difficulties in printing, run the Microsoft Fix it to reset the settings: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems
   
  Post back with the results, so that we can help you better.
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Problems with the Epson print e-mail

  When I try to print all I get is numbers and letters l it happens when I try to print from the net, as my email address. I think I just need to change a setting, but I don't have the slightest idea what to do for the changes

  I already got in touch with EPSON, cost the problem has something to do with the HTML text

• Should I bother to install the KB3177467 update? Everyone says that they have problems with the PC after installation

  Need to know what to do...

  Hey Kevin,

  We strongly recommend that install you it as it is intended as an important update. As noted on the article on KB3177467, Servicing stack update is one most important elements for the system and it contains .dll files that will allow your computer to be able to run even better.

  If you have a problem installing it the update of Windows, on the same link provided above, you have an option to install the stand-alone Installer (32-bit / 64-bit).

  Let us know if you have other concerns.

• Problem with the CentOS post-installation Script

  Good afternoon

  I use VMware Studio 2.6 to create a couple of CentOS 6.2 VMs.  A virtual machine is perfect, the other does not work it's "Script of post-installation of Application."  I find it a little strange because if I just copy the script from Studio in the virtual machine, it works fine.  But not when I'm deployign the OVF.  What?

  The two CentOS systems are virtually the same.  the only difference is in the FULL domain name and host name lines where I grep for different properties of the FVO.

  Someone has ideas how to debug this?  Thanks in advance.  I've included the script to post below.

  #! / bin/bash
  ###################
  # post.sh sets up a new system with the required configuration
  #
  # post.sh v1.0 - [email protected]
  #
  ###################
  # Variables - from the user entered in the OVF properties
  #
  FQDN = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep new_hostname | "cut-d" "'-f4"
  Hostname = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep new_hostname | cut-d ""'-f4 | cut d. "" - f1 "
  DOMAINNAME = "${FQDN #*.} '"
  IP_ADDR = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep vami.ip0 | "cut-d" "'-f4"
  
  
  # Set SELINUX to disabled
  SED 's/SELINUX=.*/SELINUX=disabled/' / etc/selinux/config-i
  echo 0 >/selinux/apply
  
  
  # Set the host name
  sed-i "s/HOSTNAME=.*/HOSTNAME=$HOSTNAME/" sysconfig
  sed-i "s/DOMAINNAME=.*/DOMAINNAME=$DOMAINNAME/" sysconfig
  echo '$IP_ADDR $FQDN $HOSTNAME' > > / etc/hosts
  hostname $HOSTNAME
  service network restart

  Hmm. This does not resemble a script of post-installation for me at all. This script is run at the end of the installation, but the VM has not been deployed yet, so the properties of the FVO are likely not useful (they are only put in place at the time of the deployment, for the * user * unit and you do this during the compilation, like the * author * the device.) The network parameters that exist in the envionment of the author are almost certainly not this as an end user * deployment * unit is lilkely to use; their domain, dns, and network addresses certainly not will be yours). Also, you don't mention how this script "failed", that might help narrow down the cause. Look at the debug log and the postinstall.log and see if you can find the real cause of the error. But in all cases, property OVF stuff you make here is not part of the postinstall script. Instead, it looks more like something that belongs in a script firstboot, although VAMI already does most of what you do with networking.

• Problems with the windows 10 installation partitions

  So I try to install windows 10 via bootcamp on my macbook pro 2012.

  However, I still have problems when I get to the screen of partition on windows 10 installation.

  So I opened the USB BOOT EFI and install from there.

  I enter my product key, accept the license, and I'm greeted by the partitioning. I select the bootcamp partition, but it will not format, gives me an error message, or it will allow me to format, but no real format. If I try to delete the partition I can't create a new one, because it gives me an error message. If I try to solve this problem by making the partition EXFAT / FAT always displays the problem. If I format it under OS X EXTENDED it allows me to move forward, but after installation, it simply gives me the blue screen of death trying to boot from the BOOT EFI of SSD.

  No idea how to solve this problem, I am getting very frustrated and frankly upset against apple to give instructions so little.

  Thank you.

  Is there a particular reason to interrupt the normal process flow using the Alt/Option key? Is your USB, USB2 flash drive Installer?

• HP 5742: Problem with the new printer 5740

  Printer will not recognize Photo tray when the touch screen works, even if the photo paper is inserted. No print of the main paper tray.

  Hi @Eddiethe12,

  Welcome to the HP Forums!

  I noticed that your HP 5742 printer will not recognize the Photo tray when the touch screen works, even if the photo paper is inserted, and that it will print from the main paper tray. I'm sorry to hear that, but happy to help!

  What is the size of paper is you try printing on photo paper?

  In the meantime, please go through these guides:

  1. Print Photos with HP ENVY 5640 5660, 7640 e - all - in - one, HP Officejet 5740 and 8040 e - all-in - One Printer Series.
  2. Print of Photos stored on your computer (Windows).

  Hope these help guides and hope to hear from you soon!

• Problems with the wireless printer, keep losing the connection by modem

  I keep the bad connection Wireless between my laptop and my wireless printer, a friend and I have tried many things to start, but nothing helped.

  Hello

  1. What is the brand and model of the computer?

  2 did you receive an error message?

  3 did you changes to the computer?

  Method 1:

  I suggest you to see link and check.

  I suggest you to perform troubleshooting services and check if they list any error messages-
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Run the Fixit tool from the link of the article below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Update the printer from the printer manufacturer's drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Reference: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Problem with the CC-Client installation

  Hello

  I am able to connect to my account. I work with windows 10.

  Problem:

  CC-client is installed and says "not connected". By pressing the connection button immediately the screen still says "not connected".

  I can't remove the CC-client. I received the message of the still some processes work.

  Can you help me please?

  Karl

  < deleted by the moderator >

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• What complicates the problem with the CS 5 installation error message

  I installed CS5 (not CC) on my laptop as my second installation.  I get the message "one or more files in the Adobe Application Support folder, necessary for the operation of PS, are absent.  Please run the installer of the PS and the re - install PS' I know that others have had this problem more, as I read a lot of posts in the forum.  The problem is that if I uninstall it, I won't be able to reinstall because it's my 2nd install.  I'm sure there must be a way to fix this problem, but I need help from a member of adobe staff.  Help, please!

  You have the right to activate only two copies;  but you can install, uninstall, and reinstall it on any of these two computers as many times as you have need or want.  Don't forget to DISABLE the application (Help menu) before each uninstall, especially if you are going to install on another computer.