Problems with the wireless printer, keep losing the connection by modem

Similar Questions

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Problem with my wireless printer and a PC.

  I don't know anything about computers so to speak to me like I'm a fool. Here's my problem I have a C4580 All in one printer and an HP Pavilion Slimline s3700y PC. It was a package deal with the upgrade of the wireless printer. Here's the problem "it seems every time I need to print something to the screen on the printer is black. I can not even put the printer off as the symbol of the power stays on. The only way for me to print something is to unplug the printer wait a few seconds, plug it in the screen lights up and back in and I can print. "It happens all the time. No idea of what the problem is? Please help before I throw this thing out the window. Thank you Richard a. Capano

  It is a common problem with the C4580. HP is working on a patch to fix it, and it should be out in mid-March. Hang in there.

• Connection wireless printer keeps losing.

  Printer keeps losing wireless connection?  I see this question posted a lot so I decided to leave a link to a video on setting up a static ip address.

  I hope this video helps.

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Problem with the connectivity

  I bought a Motorola Atrix 2 last year. My ISP is cell idea. I am a subscriber of Pune in India.

  I am facing a strange problem. When I go to Mumbai, I lose coverage and am still not able to choose a network operator. It comes on despite being on the National Roaming. Surprisingly, I get coverage roaming everywhere-New Delhi, Kolkata, Darjeeling etc. and not had any problems, he. I went to Mumbai 5 times until now after buying this phone and each time, it did not work.

  When he did not work for the first time, I thought it's maybe because I have an old SIM card (which I had), so I changed that to a 32-bit SIM. I also went and complained to the office of idea cellular and told them that I could not get roaming in Mumbai. They have checked my account and was told that my "National Roaming" was THERE and they are still based setting once more. They assured me that it should work.

  After each trip, I complained of idea and they said that the problem is not with their service. The last time I tried one thing - I removed my SIM card and inserted Vodafone SIM in it and who is not working too. However, my SIM when it is inserted into another phone in Mumbai, has started working.

  So, now I know definitely that the problem is with the phone.

  Strangely, as I said earlier, it seems to work everywhere else (or at least certainly working at New Delhi, Kolkata and Darjeeling).

  Can you suggest what I should do about it? The phone is under warranty.

  Kind regards

  Arun

  Hello Bro,

  I had a similar problem with my Motorola Atrix 2, which was purchased on January 4, 2013. Vodafone SIM is been recognized and had a red cross on the notification of signal. But the same works very well in the other mobile. Also use the SIM showed all the signal bars.

  Resolution: update number to ICS sound available that solves the problem of vodafone, but new is the difficulty to connect to the wireless network.

  Amit

• HP Photosmart 5520 - problems with the connection to the web service

  Hi, I'm trying to run the web service on Hp Photosmart 5520, but it does not work. Wireless printing works well, but he says that it cannot connect to the server and sometimes requires adding a proxy.

  I've set up a fixed IP and I used it in the IP (manual ip) configuration, I've implemented manula and gateway subnet mask (using the address of my router). I used the same primary DNS preferred (but also tried 8.8.8.8 and others)

  No question.

  Currently, I removed all of the proxy page. The error I get says that it cannot communicate with the server.

  Thanks in advance

  .. don't ask me what happened... while I was writing this worked
  Thanks anyway

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).

• Problem with the connection to USB6008 OR LabWindows

  Hello world

  I make a program in LabWindows and so far, I've had two instruments running without any problem. But I try to add a USB6008 OR the program. I downloaded something called "NIDAQmxBase" and has added a file called "NIDAQmxBase.h" but I can´t find the file ".fp" and so I have no function to communicate with the instrument.

  Can someone help me?

  The 6008 can definitely use DAQmx.

  Without worrying about the chouce on the daqmx package to install, you must install it AFTER the CVI has been installed, and in the installation process, you specify to install support for this development environment.

  After that, you should see daq function in the menu of the library (if the corresponding item is gray, go to library > customize, mark the check box, press OK and restart CVI to see the menu filled with the functions of data acquisition).

• I have a problem with the connection to the Internet after the installation of an antiviirus.

  Original title: need help. ?  Have roadrunner and I can't open any browsers or Google continues to try to connect with Steve

  I downloaded Total Defense Security Suite, and then my google wouldn't work? Cannot open any browser

  Hello

  You are facing problems with browsers to open after the download Total Defense Security Suite.

  -What exactly happens when you try to open?

  -You receive an error message?

  -What operating system is installed on your computer?

  -Have you tried to disable the Defense Security Suite Total and verified?

  If not, I suggest to turn off the Antivirus and check if ithelps.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps.

• Problem with the connection of HP printers

  Separated from this thread.

  I tried to install the disc twice. This is for a printer 5400 according to devices and printers, but the connected printer is a HP 5440. I even tried a driver for it. HP cannot help me because the printer is 10 years or more and they only provide assistance for newer models and they even removed all things related such as the manual on their Web site. The printer is connected via the USB cord. Other then the drivers I restarted 3 different times due to upgrades. The first and the second time were my computer told me to do actions. The third time was my attempt to get the driver to work.

  Other disorders then pnp driver is still not be recognized by the PC (sorry the strangeness with the largest partial word I'm a phonetic spell checker and it gets only worse when I have a restless or tired so I tried to copy and past of google, but it ruined the format it) after 3 installations a pilot 5440 and two for the pilot of 5400. The other strange thing is the USB does not appear in the taskbar, but it makes sound to indicate its insertion and withdrawal.

  After that attempt installed, right-click on the icon and select the choice that is trying to install using different parameters that will recommend Win7.  Usually, he will recommend a setting of Windows XP that works.

  Another approach is to not install any driver and see what Win7 does with it.  In many cases Win7 install using its own drivers.

  I was able to make things work in almost all cases.

• Problem with the connection to the family while security account set up parental control error 'wrong name or password '.

  Hi all, I strive to security for the family of installation for my PC, we have both sons have windows 7 on our PC. I downloaded the form MS Essentials Web site and installed on two PCs. I am admin on two PCs and it is standard user on both.

  I click on his user name in the user section and click on parental control settings, then I put my hotmail and password in the popup box and it says wrong name or password. I can't connect to the webmail for my Hotmail with the same name of user and password no problem at all.

  I tried a few different approaches all amounting to nothing. Connected to my web mail and password reset, got a new password and then tried, still nothing. I have searched here and elsewhere but can't seem to find anything like that. Sorry if its there, I maybe correct search terms are not used.

  Help, support or advice would be great.

  WITHOUT parental controls in the product lose ALSO down below, so had to post it in Live mail, but I only have problems of security for the family.

  Also as a side note, I can also connect my 360 desktop with my same Hotmail and password account.

  Concerning

  Wayne

  NO parental controls in the product drop-down below,

  No, they did a great job of hiding in the right place in their irrational enthusiasm to eliminate any reference to Windows Live. I moved your question correctly

  Then I put my hotmail and password in the popup box and it says wrong name or password. I can't connect to the webmail for my Hotmail with the same name of user and password no problem at all.

  You have probably enabled two-step verification to the account when you have changed the password. This means that you will need to generate a unique password app to use safe family rather than the account password.