Problem with the installation of the SATA controller drivers

Similar Questions

• Problems with the network controller

  Hi, I have a problem with the driver for network controller. I mean my wireless does not work... it connects to the router, but it still has this yellow warning and will not connect to internet. I tried everything and it doesn't work. I have not found a pilot wireless on the hp site. I have a HP laptop model 15-r020sq.

  Hi, I used the driver that you post. Now I have the same problems as before. I went over the details of the driver it's what he know upstairs: PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

• Problems with the Ethernet controller and PCI Satellite L30-10 X device driver

  HelloW!

  Sorry for my bad English, I'm from the Russia.
  A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.

  I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...

  Hello

  Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!

  You must choose this number in the form of driver download for XP compatible drivers.
  I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.

  I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.

  I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.

  Good luck

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.

• No problem with the enumerations of Drivers of Instruments

  I noticed in the National Instruments standard guidelines driver whenever a reference to a control that would have different options based on the test came, a ring selector was recommended and a listing... Is there a good reason to stick with the selectors to ring and not use enum? For example, one of my drivers has 4 different channels CH1, CH2, CH3, CH4... An enumeration settle well here because I can use value of the text-based config file format and create the appropriate enumeration value I want.

  "CH1" (text)--> form to value--> CH1 (enum value)

  Thanks for your help

  Are you referring to this document: http://zone.ni.com/devzone/cda/tut/p/id/3271 ? There is no explicit mention on is not the use of an enumeration. I think that it is essential to use some for control menu to facilitate the selection of the function. In some cases, a ring can be more convenient than an enum. For example, if a selection requires the actual value to be something other than the normal value of the control. Example, the selection of "DC" requires sending a value of 101 to the instrument instead of 0. In this case a ring would be more convenient because you can set values for the elements of the non-sequential ring.

• Problem with the Compaq 6715 drivers s

  I have

  @SpaceBoy90,.

  Hello

  Under XP:

  Go to control panel-> system-> hardware-> Device Manager

  If you have yellow signs then click with the right button of your mouse on each one and choose Properties. Then click on background details and paste here device id. This way we will know what it is.

  On this printer. There is no such thing as a lexmark HP printer. Find a sticker on his printer and you'll know what it is.

  Message edited by Daniel_Potyrala on 06/27/2009 17:57

• HP Pavilion g7-1219wm - problem with the network controller

  Hello, I have recently upgraded to Windows 8, everythings summer works well, but sometimes last night, my wifi controller not turn back and the only things I can find online about this are for Windows 7, the adapter is

  Realtek RTL8188CE 802.11b/g/n WiFi Adapter - and the controller is

  Realtek PCIe FE Family Controller-

  Ive went in Device Manager and disabled and enabled both devices, when I turned off the wifi card and enabled him once again, the light on the blue illuminated keyboard for a fraction of a second, then back to orange to turn them off, but when I disabled and then enabled the controller who did not, and I went into the bios and everything reset back to the default values and still nothing , the only thing I did is to uninstall the driver and reinstall it, have not found one for that compatible with windows 8 again, if anyone has an idea on what's happening please let me know, thanks!

  Hello:

  See if the windows driver 8 directly from realtek works...

  Check the appropriate box (RTL8188CE) and then click on the plu blue go button the bottom of the page.

  You will then be directed to the driver page where the driver of windows 8 is the second file listed on the page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=21&PFID=48&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  The wired network adapter... W8 is the 7th downloading listed on the page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Paul

• Problem with the graphics card drivers

  Hello

  My laptop is running the radeon hd 6470 m and I installed the driver HP offers on this Web site (this is the version 8.882.2.0). Now this driver works fine, except when I try to play some games. I love playing the game League of Legends, and with this driver installed this game does not work correctly, so I tried and return the driver back to the one that came with it when I first got this laptop (this is the version 8.830.6.3000). Now the strange thing is that with this driver installed I can play League of Legends, but other games and some programs do not work correctly on this driver, I guess because it is an older driver. Now I want to basically just installed a driver that can run both.

  I'm not sure this is the right forum to post this problem, but it is the first that I try

  My laptop:

  HP Pavilion 1270sd g7

  It's switchable graphics with Radeon hd 6470 m and Intel graphics.

  With sincere friendships.

  Sjoerd

  Just noticed that this driver is for windows 8, I m running windows 7 64 bit

• serious problem with the network card drivers

  Ok. I've been messing around last night, playing GTA San Andreas on my laptop. I wanted to see what the resolution that I could run in, so I tinker with them a little more. I tried to apply a change and my laptop screen keeps flashing between 'off' black and black 'menu of the game' and I had to manually turn off because nothing has worked. When I rebooted, I found that I had no internet. This happens fairly regularly (my laptop is a bit grumpy and so it the wireless), so I don't think about it. But this morning, when I really need to search for a document, I found that I couldn't connect to the internet - or via my wireless ethernet cable. I think I'm done at the root of the problem, however: when I go to Device Manager, every single "network card" has a yellow exclamation mark next to it. If I double click on one, it says under device status as "this device does not work properly because Windows cannot load the drivers required for the device (code 31)." After seeing this, I was indirectly bothered to download/install the latest drivers for the two most important cards (Intel Pro / wireless 3945ABG and RTL9101 Realtek PCI-E). They said facilities were successful, but after a reboot, I always saw all connections and it has not responded to my ethernet cable.
  If I right-click on one of the cards and choose "update the driver software", then select the new drivers manually, it starts to install it and then says "windows has detected software driver for your device but encountered an error...". This device does not work properly because windows cannot load the drivers required for this device (code 31).

  I don't really know where to go from here (I'll try to update BIOS driver, but I'm skeptical that it will help), and any help at all would be much appreciated. I called HP and they said my warranty was up and wanted me to pay for their "advice".

  The laptop is a HP Pavilion dv6920us.

  Thank you very much!

  Hello

  What system do you currently use?

• HP laptop i3 1000 product number: C8C94PA #UUF problem with the graphics card drivers.

  I initially was running Windows 7 Home basic 64-bit on my laptop. The version of the graphics card is Intel HD 3000, I think. Following the crash of my windows, I installed Windows 7 Enterprise 64-bit. Now when I open the HP Support Assistant, it's my graphics card adapter Standard VGA Graphics Adapter. Furthermore, none of my games begin.  When I try to install the original graphics driver for my laptop, available on the internet, he said that my phone does not meet the requirements for the installation. All solutions?

  Yes.

• Problems with the update of drivers for graphics cards

  Hello HP

  I love your work and all, like your design, but the support for this laptop when it comes to drivers?

  Last updated on the site of HP support for drivers and all is April of 2011! Version 8 - something... Latest AMD/ATI drivers is 13.4 or more (stable version)

  My phone is: laptop HP ProBook 4720 s

  And I want to update the driver for my AMD Radeon HD 6300 M series (I think it is 6370)

  And I went on ATI/AMD drivers site many, many times... Use automatic detection features and so on... WHENEVER the pilot who was already on this laptop just it would not update... I'd like to update, because... It is already 2 years from when the driver that I always use is out.

  So if you could please help me solve this problem? Please?

  -When I used the automatic detection feature, it downloaded the driver but it still says that my graphics card is incompatible...

  Hello:

  It is a forum of consumer to consumer.  No HP will address your concerns on behalf of the company.

  If you want to address your concern about any updated video driver, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Have you tried the driver on the amd Web site beta?

  See this thread where the beta driver worked for the video card more recent 8xxxM.

  http://h30434.www3.HP.com/T5/notebook-display-and-video-e-g-Windows-8/AMD-Radeon-HD-8670M-drivers-needed/m-p/2778823#M69891

  You must select the beta driver for the video card 6xxxM for the OS you are using.

• Problem with the drivers after changing Vista-> WinXP on R61i

  At first I want to mention that I am new to this forum and my native language is not English (sorry for the mistakes of language).

  Computing: Lenovo R61i 8943 g

  Foreplay:

  In the new computer Windows Vista has been installed, but I decided to switch to a Windows XP Professional.There had a few issues with the SATA controller (computer has no floppy drive). After all, I managed to install a new system.

  Description of the problem:

  I can't install the drivers to the computer (internet does not - same wired: ethernet, there is no sound, etc.) In Control Panel-> system-> device-> devices Manager there are yellow questions marks (with small exclamation points) around: network controller, PCI Device, unknown device (what is?), video controller, and video controller (VGA compatible).

  There is no CD that came with this computer, so I tried to find the necessary drivers on the internet.

  On the page

  Lenovo, drivers and downloads support

  I chose [network] to refine the results (first I want to activate ethernet Internet connections) and clicked on

  Broadcom NetLink Gigabit Ethernet software for Windows XP - ThinkPad R500, R61, R61e, R61i

  There is a file 7yra02ww.exe. At the last moment of the installation, the following window appears:

  Broadcom NetLink Gigabit Ethernet Software for Windows has encountered a problem and needs to close. We are sorry for the inconvenience.

  I don't know if I tried to install the appropriate driver. After I tried to install Access Connections (think Vantage Technologies) of

  ThinkVantage Access Connections for Windows XP, 2000-computers portable, but it also fails.

  Could someone help me what to do (what drivers to install and how)? Thank you in advance. Matthew.

  Thank you, Tim_Lenovo. My second post was about a possibility of making the easy instalation, but no one answered. Thanks - next time I'll use the system update

  I don't know what you got almost everything square away exactly means (I'm not so good in English), but I think it speaks of my redundant work.

  And the solution of my problem is very easy! I installed what it takes and just use the control panel-> power-> advanced options. (I think that my mind needs a rest!). In device manager there is a yellow question mark on unknown device (without power management there are two unknown devices without driver), so I thought that I need an additional driver. That's why I was always looking for appropriate software. A solution was so close to me

  I hope that the system update helps a lack of driver for a device unknown (I wonder what it is).

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• problem with the SM Bus controller driver

  Dear Sir...

  My machine is Hp Pavilion 1150ee g6

  product no.: LX309EA #ABV

  I have windows 7 professional service pack 1

  I am from Egypt

  I'have a problem the appliance cannot read usb flash memory and after I cheked my device manager, I found a problem with the driver for Sm Bus controller (kindlly see attached picture)

  

  so I tried to download the driver from the site sp52791

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = ar & CC = emea_middle_east & DLC = ar & sw_lang...

  But when I installed it I found a wrong message

  kindly I need your support to solve this problem

  Thank you very much for your cooperation

  Nader

  Hello:

  Try the driver directly from Intel...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 816 & DwnldID = 20775 & Keyword = Chipset + Installation + Utility & lang = eng