Problem with the installation - serial number

Similar Questions

• CS4 and CS5 Indy with the same serial number

  CS4 and CS5 Indy with the same serial number may be open both on the same machine?

  Thank you!

  I wonder how you have two versions with the same serial number? Maybe volume license?

  In the world of individual license an upgrade from versions CS4 CS5 would get a new number again, at least in my experience. With regard to the installation of multiple versions (but not different locations, such as the United States and TO the same version) no problem and I often open several versions at the same time to test and answereing questions here on the forum.

• problem with the installation of the updates updates 12

  original title: problem with installing updates 12 updates, impossible to install, but all others have taken

  I have a problem with the installation of updates, some have taken while 12 others impossible to install.  I tried the Mr. fix, but will not be too much work.

  Hello

  1 did you change on your computer?

  2 are you able to install some other updates?

  Method 1:

  Try to reset the Windows Update components

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  I also suggest you to see link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• HP LaserJet M425dn MFP 400: This product number is not associated with the supplied serial number.

  I'm checking the the warranty status of my M425dn.

  The warranty registration page, I enter my serial number and click on submit. Website "this product can be identified by the serial number only. Please enter a product number below or change the serial number above. »

  I then enter the number of related product as shown on the back label of the device: CF286A. I click send again. Now the page returns "this product number is not associated with the supplied serial number. Please check your records and make any necessary changes. »

  I have triple checked my serial number and product number. I so need to know the status of the guarantee of this device. What should I do?

  Yes, I am aware of the presentation of the printer and where are product information stickers. In fact, I have pictures of the thumbnails so that I can refer to them without having to look at the back of the unit whenever I need something.

  (In most circumstances, I could use web interface of the device to get information. "(But for some reason, the number of product is not included in the page of information of the device web interface... or any other page)."

  My unit sticker clearly shows CF286A without extra character.

  However, I now know why I have a problem. After stop HP 800-474-6836 support (moved to 800-334-5144) and passing through the quick second support 75 (don't fall for the trick of being told to go online - wait around 10 seconds of silence for the next part of the guest and eventually you will get to the point ask the bot to phone the model information), I was able to speak to a representative very nice who understood that my camera was a replacement warranty and the warranty replacement serial number has never been activated. She finds my serial number with the original purchase of a previous file number, activated the serial number of replacement and after a brief support is now send me another replacement aircraft, from one day to the next day, free of charge.

  It is regrettable that this model has been nothing else into trouble, but it's good to know that the warranty service is not too difficult.

• How long can you install the CS6 pack with the same serial number?

  How long can you install the CS6 pack with the same serial number?
  I have a new computer and you want to install it again.

  I already install twice because I needed to re - install on my old.

  you are allowed to two simultaneous activations.

  If you disable (help > deactivate) a previous activation, you can keep your two simultaneous activations and essentially install/activate an unlimited number of times.

  [moved from Creative cloud download & install download, installation, commissioning]

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus

• HP Envy 17-2100ed: problem with the installation of a driver on my laptop

  Dear readers,

  I have some time for problems with the installation of the drivers on the HP site. Whenever I chose a driver, such as for the Cyberlink Youcam software, the download process will be blocked at 28.9 MB, a total of 154 MB. I also tried to install the software for my HP printer, but once the same question.

  Can someone help me? Thanks in advance!

  Kind regards

  Amir

  Hello @Amirkalloe,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I came across your post about the problem of driver and he wanted to help!

  Problems installing drivers, or by downloading the drivers?  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Problem with the Installation of JAVA in my new Dell running Windows 7

  Problem with the Installation of JAVA in my new Dell running Windows 7 - error message when you try to intall Java using Chrome.

  "lib'charsets.jar: old file not found."  However, a file of the same name was found.  No updates since the contents of the file do not match. »

  Then "Java update fails to apply the changes to your system."

  Then "error 1722.  There is a problem with this Windows Installer package.  A fun program as part of the Setup did not finish as expected.

  Earlier, I had a problem with the video and had Windows reinstalled 7.  Now my AOL games don't show/reading.  JAVA said error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.  I was told to uninstall JRE (Java Runtime Environment).  I find two versions of Java on my system (no JRE) - Java (TM) 6 - update 14 and 14 (64-bit).  Should I uninstall both?... OR WHAT?

  Hi Betty48228,

  Here's how to solve your problem:
  (1) uninstall all versions of Java.
  (2) the uninstall will probably fail. If so, get Revo Uninstaller free http://www.revouninstaller.com/revo_uninstaller_free_download.htmland uninstall Java in advanced mode (integrated Java uninstaller runs, failure and then Revo will delete everthing manually). You will need to restart your PC.
  (3) reinstall Java: http://java.com/en/download/

• Problem with the installation of the webcam VX2000

  problem with the installation of vx2000.  After installation, I hit finish and get error Lifecam.exe has encountered a problem and needs to close.  The program is installed and the icon on my desktop but when I try to open it I get the error.  There is no Logitech drivers installed, have the latest version of the driver, uninstalled/installed in many times, did a clean boot.  Tried on another computer (same operating system) cam and installed and worked perfectly.  Reformatted the drive on my computer and and had the same problem error once again.  Checked the error reports and it shows kernel32.dll as the defective module but it, s not to be missed in System 32.  It may be corrupt and I would like to replace it.  If anyone can shed some light on this problem it would be greatly appreciated.  Thanks, Max

  Hi Max1215,

  Follow the steps in the article.

  Troubleshoot failures to find the new LifeCam hardware

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• has had an alert that there is a problem with the installation of IntelliPoint software

  I got an alert that there is a problem with the installation of the IntelliPoint software. To resolve this problem, you must remove IntelliPoint software, and then run Intellipoint Setup again.  If I have remove it where do I go to run the installer?

  Hello

  You can go here: http://www.microsoft.com/hardware/en-us/downloads

  then select the keyboard and mouse or other device you can download the latest version of the Intellipoint software.

  Thank you...

  The thread is placed automatically in Windows.

• I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:

  I have a problem with the installation of ADOBE ILLUSTRATOR using creative cloud. It gives me:

  Exit code: 117

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 0 warning (s)

  FATAL: Fatal Error ' 117' occurred in download

  FATAL: An error has occurred in the download package (name: AdobeIllustrator19-Core Version: 19.2.0.111). Error code: '117'

  -------------------------------------------------------------------------------------

  N ° 1)

  Click on the below link, Sign In and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements

  Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.

  Then click on the link below and download the installer directly mentioned in step 2.

  Step 2)

  
  

  http://prodesigntools.com/trials3/AdobeProducts/ILST/19/Win64/Illustrator_19_LS20_win64.7z

  Step 3)

  Unzip the installer using 7zip or winrar and then install the product.