Problem with the resolution of the screen on Windows 7. Help.

Similar Questions

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• I'm having a problem with the screen resolution cannot be superior to 800 x 600 pixels

  All this began after I plug an i9 phone to my pc to load

  later, to this day, when I turned on my pc screen resolution would not stay how I put it

  He wants to just go to 800 x 600 pixels.

  I ran microsoft security scan it found and deleted a virus java exploit cve 2010-4452

  but still having trouble with the screen resolution

  If the problem occurred after you plugged into your phone. I suggest to perform a restore of the system automatically, put it on a date 2 days before you had the problem. If this isn't the case, you can check the video card driver:

  Start > run > devmgmt.msc
  Check your video card driver or see if there are any missing drivers
  If its lack, then update or install the driver of your video card.
  I hope this helps you! Good luck.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Problem with the screen size of my application in the emulator for BlackBerry 10

  Hello, I have a problem with the emulator for BlackBerry 10 and is as follows:

  When I run my application in the emulator waving, sounds good and all content is complete, however, when I run the application in the emulator for BlackBerry 10 soft looks as if she had a zoom very large level of predefined way and only see a part of the application.

  With controller emulator, I have changed the level of 70% zoom, but still does not work.

  Here, I'm posting two photos:

  

  

  One future half-assed answer

  var dpr = 1; // To set the meta on a real device to get 1:1 pixels
  
  if(typeof window.devicePixelRatio != 'undefined') // Does device support devicePixelRatio?
      {
      dpr = window.devicePixelRatio;
      }
  
  if(dpr) // Set up the right meta
      {
      var meta = document.createElement("meta");    meta.setAttribute('name','viewport');
  
      meta.setAttribute('content','initial-scale='+ (1/window.devicePixelRatio) + ',user-scalable=no');
      document.getElementsByTagName('head')[0].appendChild(meta); // Inject meta
      }
  

  This works perfectly, but must be placed in thethe document FIRST and foremost

  Live JS is used to avoid problems of library management

  It won't work in Wellington but works perfectly on all devices I've tried

  As mentioned in the code above just packaging needs in the script tags and setting very high index.html HTML code as you can get - right after

• having problems with the pop-up windows of analytical Google all of a sudden and now the pages are crashing or being redirected

  original title: google analytics popups

  Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?

  Hi NicolaaTC,

  See the links below and check if it works.

  What is the browser hijacking?

  http://www.Microsoft.com/protect/terms/hijacking.aspx

   

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

• problem with the installation of window package

  Impossible to install, i-tunes, quick time and I downloaded Security software. Error message indicates a problem with the windows package install. On Vista, this is a fairly new problem
  Thanks in advance
  Jack

  Hi Jack8053,

  Thank you for visiting Microsoft Answers.

  · The error message you get when you try to install a software, what exactly?

  · Remember to make changes on the computer before this problem?

  It seems to be that some of the files windows install is corrupt. I have a few steps that might help you to solve the problem:

  Method 1

  Make sure that the Windows Installer service is running.
  1 open run and type services.msc, and then press ENTER.

  2. in the services window, locate the Windows Installer service in the services list.
  3. check that the status is "started". If the condition column is empty,
  Right-click Windows Installer, and then select start.
  4. change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  Method 2

  Run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button.

  2. on the Start Menu, click all programs followed by accessories.

  3. in the menu accessories, right-click on command line option.

  4. in the drop-down menu that appears, click the "Run as Administrator" option.

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press ENTER.

  7. a message is displayed indicating that "the system scan will start.

  8. be patient because the analysis may take some time.

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue.

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Method 3
  1. If it does not help, try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  2 restart the computer.

  3. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  4. try to install the program and check that it works.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer.

• Problems with the photoshop pen pressure, please help!

  I have problems with the stylus pressure sensitivity. My drawing tablet works great and fits perfectly, but photoshop can't detect the pen pressure. The Tablet I have is a brand new turcom ts-6580.

  Yes, I tried their website and had no luck. I searched online to understand this and apparently this tablet has the same drivers as the tablet of the Oh, I guess that they were made by the same company. I sent an email to remember on this subject and they sent me a link to download the latest version of the driver.  Once I pulled the program and checked "TabletPC support." Photoshop has begun to recognize the pen pressure.

• I have problems with the text... Help

  Hey

  I have problems with the text box in indesign cs4...

  When I do a text frame and write a short text and want to make a new line and press ENTER, my cursor goes to the next page and the small red cross in the corner of my document apears.

  someone knows what to do here?

  I realle need your help

  Thank you

  This has been covered a lot. A BIOS update may be an option to solve the problem of keyboard mapping, you can change your keyboard shortcuts to reassign the digital keypad input to be a paragraph return or you can try simply by changing the State of the numlock - if it is on, turn it off and vice versa. Withthis problem most of the systems that seems to change the function of the two keys back and forth between the enter alpha and entry number.

• Big problem with the variable PATH approx. need help!

  Hello
  I had a problem with the PATH environment variable. Instead of updating client Informatica & server paths PATH env variable, I created new PATH env variable and to establish client & server paths and saved. When I revisited this PATH Env variable, I was shocked to see the content of the PATH variable. I have to set back the old values like windows OS, DB etc paths paths. Could someone tell me how to make or do I have to reinstall the OS, DB, etc. Am on WIndows server 2003.

  I saved my PATH before configuring Informatica. Here's what I had:

  Path = C:\oracle\10gclient\bin; C:\OracleBI\server\Bin; C:\OracleBI\web\bin; C:\OracleBI\web\catalogmanager; C:\OracleBI\SQLAnywhere; C:\OracleBAM\ClientForBAM\bin;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem; C:\OracleBAM\BAM; C:\Informatica\PowerCenter8.1.1\client\bin

  The critical components of the OS dependent PATH is % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem.

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)

  I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate.  The iPhone does not accept my Apple ID.  He is looking for an address icloud.com.  I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck.  Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office).  Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen

  To be honest, I was going to pick up a new phone this week anyway.  My concern is now that I don't want to not suddenly faced with the same problem.  This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.

  It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.

  Thank you all for any help

  If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.

  If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.

• Problem with the screen when it rains it is wet

  Hello world
  Any of you had a similar problem like me?
  I noticed this before, when the screen is wet or raining on her is pushing screen by itself.
  At first I thought it's because problem of protector of screen, but 3 days ago when it rained, I wasn't able to use my phone at all, and I needed to call so consider screen protector, but the problem was still there.
  Like water proof phone that this should not happen.
  Is there a problem like that with my phone only?
  Should I inform Sony about this and send for repair?

  When the device comes into contact with water, the touchscreen misbehave. It's normal, that's why you have app touch block to take pictures under water.