Similar Questions

• Problem with "Filling space" described in the Blog of Tim

  Dear Experts,
  I use the invoice template described in the excellent Blog of Tim Dexter (Anatomy of a model) to produce my own version. However, I have problems with the 'fill' space as described here: http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
  
  My model is almost identical to the example, when I import XML data when there is only a single folder, fill space have not not cushion with enough blank lines so that the Total of the table at the bottom of the page, does not correspond with the watermark that I. The code in the field "Fill the space" is as in the Blog:
  
  <? If: not (count ($invLines) mod $lpp = 0) and ($start + $lpp > count ($invLines))? > <? for each: $invLines? > <? If: position() < $lpp - (count ($invLines) mod $lpp)? >
  
  
  If the number of records is greater than half a page or more, then the padding is correct. This is even if the word to say on the third page, it is a single record. Therefore, it seems that the padding does not work if the number of records is less than half a page total.
  
  Is this correct and what someone have a solution - would be greatly appreciated.
  
  Thank you very much
  Mark

  Hi Mark,

  I had problems with this earlier. See the comments on the bottom of the blog post you linked to above. The problem is down to the filling loop is a variable containing the invoice-based. If the number of invoices in this recordset is not sufficient to provide all the required filling lines, the formatting goes belly up.

  For loop in the XSLT file, you must use models of void. I got it going with my report using the code here:

  http://www.IBM.com/developerWorks/library/x-tiploop.html

  Basically you call recursively model for the number of required fill lines. A lot of effort but far as I could tell, the only solution given the available technology.

  I hope this helps.

  Jon.

• better integration with the Mavericks. Still a problem with the display of the menu bar spaces when moved

  Much better integration with the OSX mavericks on the latest version. Without a doubt ahead of Parallels in terms of dual display/full screen. The menu bar has been resolved, but there is a ghost menu bar that appears when you move one space (fullscreen vm) from one monitor to the other. It resembles a translucent bar on top and without words. But clicking on it shows menus as if it is supposed to be links there.

  Yes, it is a known problem with the Mavericks Developer Preview; We work closely with Apple to find a solution. So far, we have seen only with the restoration of the window or when you move the window between monitors - if you leave full screen and enter again, it should work fine. If you notice any others, please let us know.

• Problem with the disk free space.

  I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

  What I oh sensor:

  Size of filesystem used Avail use % mounted on
  / dev/sda5 2.9 G 562 M 2.2 G 21%.
  / dev/sda1 99M 37 M 58M 39% / Boot
  / dev/sda7 67 67 G 0 100% but
  No 1.9 G 136 K 1.9 G 1% / dev/shm

  May be the problem with the records of Volume.What I could check and delete? Thank you!

  Hello team,

  * Could you please check the following points: -.

  CD/var/tmp /.

  du-sh *.

  You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

  rm - rf *.

  It is a known bug where the but gets completely due to Apply_ files *.

  * Also check the following points: -.

  CD/var/sf/updates

  Remove the old patches if there are.

  * Check the following backup folder and the folder of detection engine too.

  CD/var/sf/upgrade_backup

  du-sh *.

  CD/var/sf/detection_engines

  du-sh *.

  Rate if this helps you.

  Concerning

  Jetsy

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• Problems with the layouts and headers

  Hi I'm a newbie, trying to page layouts, I have 2 questions. I would be grateful for any help or pointers to tutorials.

  (1) I have problems with the links at the top of my page. They are text based and in a table of 2 rank. They have a huge ditch around them and no matter what I do I cannot resize the table or change the text to be less than a gap below it. Basically I have a huge gap between my links at the top of the page and the main logo and the main logo below. (and I think they are related as the h1 which I don't want that they're not really the header only links). Here's the code for that.

  <table width="740"  border="0" align="center" cellpadding="0" cellspacing="0" class="HeaderLogoButton">
        <tr align="center" valign="top">
          <td width="288" height="48"><h1><br /><br />
          </h1></td>
          <td width="452" height="25"><!-- TemplateBeginEditable name="HeaderLinks" --><span class="TextButtons"><a href="../index.html" class="TextButtons">Home</a>      <a href="../featured.html" class="TextButtons">Featured Company</a>      <a href="../youngpeople.html" class="TextButtons">Young People</a>      <a href="../andmore.html" class="TextButtons">And More</a>     </span><span class="TextButtons"> <a href="../blog.html" class="TextButtons">Blog  </a></span><!-- TemplateEndEditable --> </td>
        </tr>
        <tr>
          <th height="48" align="left"><a href="index.html" title="My Site Title"><img src="../images/My Site_logo.png" alt="My Site Logo" width="245" height="46" border="0" align="left" /></a></th>
          <td align="right" valign="top"><!-- TemplateBeginEditable name="HeaderButtons" --><img src="../images/facebook.png" alt="FaceBook Button" width="36" height="36" align="top" /> <img src="../images/twitter.png" alt="Twitter Button" width="36" height="36" align="top" /><img src="../images/blogbutton.png" alt="Blog Button" width="49" height="47" align="top" />  <!-- TemplateEndEditable --></td>
        </tr>
      </table>
  

  (2) my second question with headers in general. As you can see in the code I have a "My Site_logo.png', as the main logo for the site, what concerns me is pointing to it as the main h1 header so that when the spiders come to visit, either by the additional logo or html, they read that the site is called"My Site"the main header. How can I make the logo/title of the h1 of the code section? I'm afraid of making a mess of the code at this point, so any help is very appreciated!

  Thanks in advance

  evilJim wrote:

  Hi I'm a newbie, trying to page layouts, I have 2 questions. I would be grateful for any help or pointers to tutorials.

  (1) I have problems with the links at the top of my page. They are text based and in a table of 2 rank. They have a huge ditch around them and no matter what I do I cannot resize the table or change the text to be less than a gap below it. Basically I have a huge gap between my links at the top of the page and the main logo and the main logo below. (and I think they are related as the h1 which I don't want that they're not really the header only links). Here's the code for that.

  In the first cell of the table, you have a tag h1 (header tag) (see below), in this tag you inserted two break tags
  by pressing return on your keyboard twice. These breaks are reduced the height of the first row of the table, that's why you have all the space under your links.

  
  
          

  evilJim wrote:

  (2) my second question with headers in general. As you can see in the code I have a "My Site_logo.png', as the main logo for the site, what concerns me is pointing to it as the main h1 header so that when the spiders come to visit, either by the additional logo or html, they read that the site is called"My Site"the main header. How can I make the logo/title of the h1 of the code section? I'm afraid of making a mess of the code at this point, so any help is very appreciated!

  Thanks in advance

  At the moment you have nothing apart from 2
  tags in your h1 tag (see above answer to your first quetsion.

  Purposes of search engine, you can encapsulate your image in an h1 tag and provide an overview of more descriptive than "My Site Logo" for the images 'alt' tag

  

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• No problem with the addition of a Kingston SSDNow V300 240 GB SDD to a D7-1245dx?

  A knowledge of any problems with the addition of a Kingston SSDNow V300 240 GB SDD to a D7-1245dx? Its size is 7mm width 69,85 mm x depth 100mm height but not sure of the size of the computer laptop berries/caddy supports

  Decide whether to use the laptop for a little longer so to upgrade the system to a Kingston 240 GB SDD drive and move the current drive to the secondary location (already got 2nd coming of caddy). It lets me do a bit more space on the laptop in addition to increasing performance.  Figure between an SSD and get up to 8 GB ram it should last a little longer.

  You will have a shopping cart for the SSD, but it looks like you have an and get a second wagon. Dv7-1000 series does not use a cable or connector. the hard disk plug right into SATA ports on the motherboard. 7mm drive has the connectors SATA and the mounting holes exactly in the same place as a 9.5 mm drive. All is just shorter so the reader rides low in the caddy. As a swimming pool with 20% water let out. 7mm SSD works perfectly. Windows 7 or 8/8.1 are preferred; Vista is not configured to treat SSDS as well or easily.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• OfficeJet Pro 6830: There is a problem with the printhead

  There is a problem with the print head.  Or can not find the print head

  This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

  turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• Problem with the game on XP XP3

  I ran into this problem on my XP computer. I know, I know. Old school freak who has not made a change for Vista... closing. In any case, I'm having a problem with the compatibility of the SP3 with a SP2 game, otherwise known as Grand Theft Auto San Andreas. I have more demands. I have a lot of space. The problem occurs when going from open screen of editing on the menu screen. It gives me an error. I have established this as a SP3 problem and would really like to know if there is a way back, or using a compatibility mode to use the program as SP2 without installing SP3. If there is a patch for SP3, which corrects compatibility issues, which work as well!

  Thanks for your time, the peoples of Vista!

  Valen

  Hello Valen Celcia,

  Thank you for using the Microsoft answers Forum.

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/windowsxp/expertzone/default.mspx

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Problems with the IP settings on XP pc wireless network

  I have (part time) a wireless network to recently set up. Router is connected to a pc windows 7, and there is a XP machine with a USB adapter as well. The PCs are turned on, and the XP shows a wireless connection with a 'very good' signal. When I try to start IE on XP it will fail to connect. When I then run the diagnostic network connection died at around the point where the diagnosis is trying to reactivate the adapter. The diagnosis of output reports "error renew IP address: semaphore timeout has expired" and "default gateway 0.0.0.0." If I then run ipconfig/all there is absolutely NO output. This happened yesterday, so I manually reset following IP 299357 instructions and the same thing happened again. I did the reset again and rebooted the XP. The router indicates that it has recognized the XP and ipconfig/all on XP shows things different, including

  IP 192.168.2.6. subnet mask 255.255.255.0; gateway by default, dns server, and dhcp like 192.168.2.3 Server (the IP address of the router); DHCP and automatic configuration enabled. IP routing and WINS proxy are disabled.

  While I was typing the above router lost sight the XP box, although the box XP still reports a 'very good' signal and a connection permanent.

  So far, I had this network in place for 10 days, but could not use the connection to the outside of the PC XP on a day, which followed my re - configure the router to its IP address 192.168.2.3 rather than recommended in setting up such 192.168.2.1, because 192.168.2.3 was that the XP box trying to connect as. Two PCs have been turned off during the night and worked fine when started the next morning for the entire day. The next day that XP had a connection for long enough to reach the site where I was looking for updated printer drivers, and then he lost when I started to download the and nothing since. IP information now suggests that I might have little joy for a while, if I still have to reset the IP address of the router to 192.168.2.6 this time, but I don't see why I should continue to do.

  Some of the other TCP performer? Troubleshooting IP connectivity:

  Ping 127.0.0.1 return OK; ping 192.168.2.3 expires; ping 192.168.2.6 is OK; ping host name does not work (assuming that the host name is just the name of the computer to the pc win 7); Pathping 192.168.2.6 works. (If that this watch is actually the host name and then ping that name does not work either, there is no entry in the ARP cache, do not know the valid IP addresses to test those.)

  Suggests that I have problems with the default gateway, and name resolution, but I do not know how to set resolution, unless you change the IP address of the router, which can do the first, but not the second.

  Suggestions welcome.

  The fact that things worked fine for a day seems to indicate that the material is OK, and I checked that I have the latest firmware for the router and USB adapter. Security of the router is disabled, as is the firewall on the XP, neither of which is ideal

  Technical support of Belikin has decided that the adapter was flakey too and should be replaced. If we call things the customer support, and I heard of them since, did not except a s message that seemed to ask whether or not I had entered with them...

  So what network?

  Packed wireless router and got some kit devolo for a network of current carrier online (on the grid) put in place instead. More expensive, Yes, but IT WORKS! 6 weeks later, still no problem to access Internet from a PC.

• OfficeJet 8600: HP OfficeJet 8600 'problem with the printer or ink system '.

  We have replaced the cartridges (with HP) and now we can print only about 1/2 a page, sometimes 1 page-, then it displays an error, "There is a problem with the printer or the ink system" and the printer should be set and to continue...

  We bought new (2nd series) of the ink cartridges and the same behavior exists.

  It seems to point to a new print head - but those who are more expensive than a new printer.

  Are there other measures I could take to try to resovle?

  I can't find scraps of paper (ie: torn, jam, etc.), nor any excessive ink any where - everything seems pretty clean.

  I removed the print head and cleaned the contacts.  I cleaned the contacts on the ink cartridges. I ran "Clean print head" in the Tools menu (which results in the same error)

  

  There are sometimes up to 3 of these messages "stacked."

  It is died regardless of what was asked of it... ie: print from netowrk, printing via usb, copy color, copy b & w, etc..

  Hello @jassing,

  Thanks for posting in the Forum from HP Support.

  I understand that you are experiencing a recurring error state in your HP Officejet Pro 8600 e-all-in-one printer.  I want to help you with this.  While it is clear that you have tried most of the recommended troubleshooting steps, I have some additional suggestions that might help.

  HP article presents common troubleshooting steps in order.  You can give these another shot before trying the more intensive step that I have in mind.

  If you have tried all of the above and your problem persists, click here to check the status of your printer warranty.  If your printer is currently under warranty, please call our technical support in 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If your printer is NOT IN WARRANTY, try the following:

  Get ready to clean the print head

• Problem with the playback of an audio .asx file in Windows Media Player.

  Hello

  I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.

  I get the following in a pop-up error message:

  Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").

  Help, please.

  My email address is * address email is removed from the privacy *

  Thank you.

  -HimAlandi

  Hello

   
  1. facing this problem with the .asx format?
  2. you remember to make changes to the system?
  3. where is the file?
   
  Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »
  Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.
  If you encountered this error by clicking a link on a Web page, the link isn't valid.
  If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").
  The following is a list of protocols supported by the player and the correct URL syntax examples:
  
  (a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
  (b) http://server/filename
  (c) rtsp://server/filename
  (d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)
  If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.
   
  To configure the protocol settings
  (a) in the Player Windows Media, on the Tools menu, click Options.
  (b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
  (c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.
  If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.
   
  To rename the folder of information networking of player.
  
  (a) close Windows Media Player. (To do this, on the file menu, click on exit).
  (b) to make the changes that you will be able to see the hidden files and folders
  Show hidden files.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files
  (c) click Start, and then click computer.
  (d) open the disc drive Local (c :)), open to users.
  (d) open your user account.
  (e) open %APPDATA%\microsoft\windows\sendto and open Local.
  (f) open Microsoft and open Windows Media.
  (g) click on the file and rename it.
  (h) if the file is name12.0, edit as file name as old 12.
  (i) restart the computer and check