Problem with the system icons in the tray in Vista

Similar Questions

• Problem with the retailer regarding Vista disk operation

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi, I wonder if you can help me with some advice, it is on the PC I bought my father-in-law 6/8mnths ago. Until recently its been fine but lately its reading high and gel etc... to cut a long story short...  When I bought the PC 'Vista' has been pre-loaded and I never thought to check if a disc of the "Vista" operating system has been provided...

  The stepfather wants to re - install the system, but did not get a disc and never had one, when ive asked the shop on this subject that they say that they only provide a... surely that goes away, he said...

  Any help would be accepted with gratitude about whats the carnal... I had one with my Dell.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the Gateway using Vista laptop battery

  Hi all

  I've had this laptop Gateway for a year now and I have had this strange problem with it probably a good 3 months to own. Basically the little thing of battery indicator on the bottom right of the task bar will say "plugged in, not charging" while the laptop is plugged. So this is my little ghetto rig which leads me to believe that is not the battery or the charger which gives me the trouble.

  While the laptop is plugged in, and moan about there is no life left blah blah, I pop the battery and back in. Hop, I magically have full battery and be able to unplug the laptop for mobile use.

  I've read a lot online that it is a Vista problem, that I am running, and not a hardware problem. I would really like to know if this is true, because I am a student and prefer not spend the precious material fixing money when this is not the problem. As stated earlier, cell phone charges when it is plugged in, it SAID only that it does not load. When I pop the battery, it works fine until the next time that the battery is exhausted and then I plug it in and have to redo the same platform of ghetto.

  It's just a little a downside to keep popping up that darn battery in and out, and frankly, I don't think it's good for the laptop to keep doing this, even if it's worked for me for about 7-8 months now.

  Can someone please offer information about this weird issue?

  Thank you very much.

  Why my battery portable MD Gateway or Gateway MC series doesn't load at 100%?
  http://gateway-us.custhelp.com/app/answers/detail/A_ID/2624/kW/battery%20not%20charging/session/L3NpZC9UKjJBcnNsaw%3D%3D

  Also in this forum:
  Gateway Laptop: plugged in, does not support
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6db4fe50-D318-44DA-a938-2fc58f4bbe7b
  on one of the post of Leaky.

  I hope I could help

• Satellite P100-324: problems with the installation of Vista-> cursor flashing

  All greetings. Tried to put one of these days of Windows Vista. But my attempts to failure are completed. After the first? There is a black screen and blinking cursor. So any activity HDD and DVD, it is not respected. Recently updated BIOS updated to v3.30. Help put already and I do not know what to invent.

  For English I apologize, I'm of the Russia :)

  Hello

  Have you tried to format the HARD drive and reinstall Vista?
  Try to access the BIOS and check if the HARD drive is recognized in law.

  What exactly happened during the installation of Vista?

• Problems with the home network Vista-Windows 98 SE

  The material is properly plugged computer Vista 98-router-computer by ethernet.
  Group is correct on both computers (working group)
  Computer with Windows 98 Second edition can see Vista computer and network neighbourComputer with Windows 98Se can see Vista disk and shared folders and can create network drive
  It cannot access the file and read dirctory in folders shared of Vista. Wait and sometimes crash (happens with this machine before). In addition, it is very slow.
  Vista computer properly manage files, shared files on the Windows 98Se computer, it can load programs, but it is a stupid machine and she don't properly map the network (detail).
  If you can help, thanks. Answers in french are also welcome.
  Kind regards

  LaurenJF, we do not support setting up file sharing between Windows Vista and a version of Windows prior to XP.
  Thank you for visiting the Microsoft Vista answers community. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the installation of Vista Home Premium on XP Professional

  Original title: Reinstall Vista Home Premium on Boot up

  Vista reinstall at startup

  My computer had Windows Vista Home Premium top. I installed XP Pro top. I want to reinstall Vista Home Premium back. When I restart my computer to reinstall, it doesn't reconise thd dist and continues to initialize. I tried Windows 7, not go. I tried XP Pro and it picks it up each time. I don't understand that. Why is it so?

  obmdaw

  Vista reinstall at startup

  My computer had Windows Vista Home Premium top. I installed XP Pro top. I want to reinstall Vista Home Premium back. When I restart my computer to reinstall, it doesn't reconise thd dist and continues to initialize. I tried Windows 7, not go. I tried XP Pro and it picks it up each time. I don't understand that. Why is it so?

  obmdaw

  It seems to me that You ' r try to boot from a DVD using a CD/RW drive. Vista and Windows 7 come on DVD, so your not being able to even read. On the otherhand is Winxp comes on CD

• Problem with the wireless on the system tray icon.

  Original title: wireless

  not found wirreless icon in the taskbar

  Hi Amourhbone,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the icon on the system tray wireless.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Provide us with a few details in order to better understand the issue.

  1. which version of the operating system are you using?

  2. deal with any problem with the wireless network using Internet?

  3. do you receive any error messages?

  4. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• problem with the Quick Launch bar - see the desktop icon missing

  original title: problem with the Quick Launch bar

  I've lost the 'show desktop' icon in my quick launch because of deleted by mistake the icon. I want that icon to return to the system to go to the office quickly within my work on computer... How can get that back?

  See How to re - create the icon of the Office see the Windows XP Quick Launch toolbar

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• Kalonline-works until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking

  I play kalonline (RPG game), when to start the game it works up until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking. the program stops. I am the admin of it say kal computer run it in administrator mode and I did and I delete and reinstall the game. Solve the problem in win 7 by a right click and run as administrator, they wanted to work in win xp it all fits on how to solve this problem. These are the things, I was told to do to fix it.
  Hello

  It comes to KalOnline.

  Your error message can be corrected by following these steps:

  1. run KalOnline in Administrator Mode.

  2 uninstall KalOnline d_lete the entire Inixsoft folder, then reinstall the game.
  I did it and and it has not worked. then I was told that this was causing the problem

  Please check your computer system.

  This problem has occurred by a kind of problem of piracy.

  And if you have used a kind of memory-editing program, it could be happen too.

  So if your receipt similar to, then please remove it.
  I have none of these things on my computer. All I know is that people who have not updated windows xp can play the game and people who win 7 can play the game if they right click icon and run as administrator, that I still say side here but no way to prove it.

  Hello

  I suggest you to get in touch with the manufacturer of games and see if there are any other fix for this problem.

• How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder

  How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder?  Where can I find that when it's done download?

  Could you please confirm the operating system you are using.

  You can see the status of the application of CC desktop download.

  The CC app desktop click the creative cloud icon located in the taskbar (Windows) or the Apple bar (Mac OS) menu, to open the creative cloud desktop application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.