Problem with use of a printer on a homegroup.

Similar Questions

• Problem with scanning HP f4580 printer.

  Problems with printer hp f4580 all-in-one. It prints and copies fine, but I cannot scan documents. Tried to reinstall the software package hp and nothing. When you try to scan, I get a "error detected no scanners were. Pls HELP crazy me!

  Hello

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  Range of all-in-one printers, HP Deskjet F4580

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Problem with the HP P2055DN printer.

  I use printer mentioned above often print 2-sided documents. The printer is connected RJ45 print router-switch and laptop sent by wireless LAN. After a few days (2-4) the printer in Control Panel 'forgets' duplex. I have to go into the control panel and enable the setting of the duplex to "installed". It works just fine a few days and the problem recurs.

  Can someone help me?

  I have the same problem with a 2605DN

  I have not tested but the key "Reg" is HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\HP Color LaserJet 2605 PCL6 class Driver\DsDriver, which has a printduplexsupported value that should be set to 01. If you set it in the printer driver, and then save the key "reg" by exports then right-click on DSdriver in the left panel, it will give you a file, you can double-click to set up the key as part of your departure or office.

• Problems with the launch and printing from Internet Explorer 10, with updates of Windows Installer and start-up and shutdown of the computer.

  Original title: IE 10 freezes work stoppages and turns off

  I use it is to say 10 since I have a new computer in 2012 have not had problems, but for the last week, if I try to print something from my mail I receive IE has encountered a problem and closes the page and restarts it so go to Mozilla to print, yesterday IE was out completely had to return to Mozilla to get on the web. I have also had problems with my computer do not completely stop or does not start, I get to the part type to password in the and he died, tried to install optional updates in windows and it has not does anyone know what I can do to solve the problem. would really appreciate it

  Hi Mark,

  Have you tried the steps I suggested in the previous posts? If this isn't the case, please try these steps and check if that helps.

  You can also try the steps outlined in the article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Sometimes when a windows update it causes problems with my photosmart c4795 printer. Usually making it unable to find or may not be usable.

  problems with windows update problems with my printer causeing

  Hi Virgil13,

  · You receive an exact error message or error code?

  · What is the operating system installed on your computer?

  Run the fix it from the link below and check off the results: printing problems and printing errors:http://support.microsoft.com/gp/printing_problems

  Also check the installed updates:

  a. open Control Panel from the start menu

  b. Select programs and features

  c. click View installed upgrading

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Someone out there who has an ongoing problem with 7 refusing to print, even after that the driver was abandoned and re-installed?

  I have a Toshiba laptop that runs Windows 7 with an HP printer 6 L. I am running Open Office 4.0.0 and the latest version of Adobe Reader. To date, that the system is undesirable! The 6L display test endless pages but refuses to print anything out of system 7. I dropped 6 L Driver, registry & file cleaned up and optimized the system and then reloaded the driver off of the HP site but the system refuses to print. I even went up to turn off the printer for more than 24 hours to try to get the printer to the reduction in the memory and empty the memory to zero to try to kickstart the printer to pick up the 7 material systems. Up to present all this for nothing. 6L memory is fixed at 1 024 Ko and the document larger than I tried to print has been 136 k so the memory capacity must be nothing. Anyone, anyone, outhere who can help, please. I'm ready at this stage to give up the printer with an AX, since it is now beyond the frustration and get into madness! I must also stress that the 7 system also creates a (1 copy) in the printer Panel. There is no need too!

  Hi Mike,.

  Do you have an error message when you try to print from the Windows 7 computer?

  I suggest to refer to the following article and follow the steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also follow the steps in the following article.

  HP LaserJet 6L - cannot print from a custom Application Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=ipl00001&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=25476

  Reference:

  HP LaserJet 6 L Printer series- Frequently asked questions

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportFAQ&lang=en&cc=us&docIndexId=64178&TaskID=101&prodTypeId=18972&prodSeriesId=25476

  Feel free to get back to us if the problem persists. We would be happy to help you.

• Problem with using of the audit and the APEX triggers

  Hello community,
  
  I have a little problem with the help of a trigger to audit. I can't operate the trigger takes the reality of the user to record in the audit table:
  
  DDL in the table:

  create table BOOKS
  (
    B_ID           NUMBER not null,
    B_NAME         VARCHAR2(100),
    B_DESCRIPTION  VARCHAR2(500)
  );

  DDL audit table:

  create table AUDIT_BOOKS
  (
    B_ID           NUMBER not null,
    B_NAME         VARCHAR2(100),
    B_DESCRIPTION  VARCHAR2(500),
    AUDIT_USER VARCHAR2(50),
    AUDIT_DATE   DATE,
    AUDIT_ACTION   VARCHAR2(6)
  );

  ddl trigger:

  CREATE OR REPLACE TRIGGER trg_audit_books
    AFTER DELETE OR UPDATE ON books
    FOR EACH ROW
  DECLARE
    v_trg_action VARCHAR2(6);
  BEGIN
    IF updating
    THEN
      v_trg_action := 'UPDATE';
    ELSIF deleting
    THEN
      v_trg_action := 'DELETE';
    ELSE
      v_trg_action := NULL;
    END IF;
    INSERT INTO audit_books
      ( B_ID,  B_NAME,  B_DESCRIPTION,
        AUDIT_USER,  AUDIT_DATE,  AUDIT_ACTION)
    VALUES
      (:OLD.B_ID, :OLD.B_NAME, :OLD.B_DESCRIPTION,
        UPPER(USER), SYSDATE, v_trg_aktion);
  END trg_audit_books;

  Column AUDIT_USER always gets "APEX_PUBLIC_USER" as a value of insertion. How can I change to the user real "& APP_USER."?
  I tried under Home > Application Builder > application 100 > shared components > change attributes for security > authentication > Public user
  And added & APP_USER. and: P101_USERNAME both have not changed anything.
  
  Is there a way to get to work with & APP_USER. instead of APEX_PUBLIC_USER?
  
  I use the standard authentication scheme 'Application Express'. I use ldap via a process to the login page.
  
  Kind regards
  
  Tobias

  Hello Tobias,.

  In the trigger instead of the USER code, use v('APP_USER') to catch the real user of APEX.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

  You can assign this answer to your question in marking it as useful or Correct ;-)

• Pencil of Apple: no problem with using on a shield by Zagg screen?

  Any who are having problems with the help of an invisibilityShield of Zagg on an iPad Pro? Wondering if the plastic reduced the fineness of the drawing or writing with a pencil to Apple? The pencils pen point "dig" or feel like it drags on the shield against the finesse of the iPad glass screen? Thank you.

  I don't have a pencil, but I do not have the protections zagg and I have not known any drag on my device. Now if you really press the pencil, well he can drag as a pen can slip on a pad of paper, but you shouldn't need to support on that is hard.

  Does the company have a day 30 policy on what it be sold on their site, so if you buy it and don't like you can return refund

• Fill out and return to zero problems with Deskjet 3052 has printer and cartridge 61xl black

  Yesterday, my new 61xl OEM black cartridge ran out of ink. I had it only for a few weeks, but this cartridge made of course go fast (faster than the startup cartridges, I swear!). This is a printer at home that is used only by me for personal use.  I wonder how much ink was in it when I bought it. Of course, they don't disclose the ml on the packaging more... how convenient for them, huh?

  In any case, I decided to fill up again. It was my first attempt for this printer and a total failure. I did some research. I used 2 other cartridges to fool the technology of memory without result. Online instructions for which parts of contact on the Strip are either nonexistent for this cartridge or are as clear as mud so I couldn't try it again... This is where it would have been a picture is worth a thousand words.

  It would be a very good alignment page printing. So I think it was successful. But when I tried to print or copy something, it would print the upper part and act like it ran out of ink down. The same thing with trying to clean the print heads. He will start the black stripe and stop about two thirds of the way through. There was less black to have with each successive cleaning, I've tried. If I started on the first cleaning would have the same generous amount of black ink, but decrease as before. I was losing the ink in my brand new color cartridge so I stop messing with it.

  I received errors to gogo (not OEM! False! The sky is falling!). The ink is obviously coming out of the cartridge, so it's not the problem. All I know is that I have a good full of the same black refill ink oem cartridge that I use in HP cartridges for years.

  I don't really like what is happening to this piece of crap cheapo printer so I am not interested to hear how HP has my best interests at heart. What about someone gullible. If I mess up with cheapo ink, then what? And counterfeiting BS is a bogus excuse too.

  Yesterday I had to go out and buy a new cartridge. So today, I found a printer as I used to have (1315) for $20 on Craig's list. Heck, I have tons of cartridges 56, 57 and 58 for this baby and you can charge for this printer throughout the day. I not picking that up next week but then if someone knows how to bypass attempts to be GREEN with this printer and cartridges, of course I understand the help. Maybe who contacts on tape cartridge? Or the head of which HP exec throw this printer to? I'm open to suggestions. Otherwise, the next cartridge runs out in this waste of time and money, it just goes straight to a landfill where it belongs so it won't be wasting someone else's time or money. Thank you!

  It seems that you have introduced an air bubble in the cartridge drain pipe, resulting in starvation of ink you print.

  Pageyield of HP's site lists the 61xl 8.5 ml cartridge.

• Microsoft Paint problem with preview and images printed in being extended

  I used Microsoft paint for years and all of a sudden, I'm having a problem where when I previews the image in paint is be lying and it is also elongated impression. However, the image in the window of the paint itself is fine, and if I open the image in another application IE. Photoshop - image presents a preview and prints correctly. What has changed and how I can fix?

  As I said previously... I guess just but you mentioned that the distortion
  was not only visible when in preview but also appeared on the print
  document. If it occurred during the display, I suspect the video driver.

  If the printer has not been updated for many years... of the manufacturer
  support site might have an updated driver, you could try. And it is certainly
  possible that the printer has nothing to do with this issue...

  If everything worked perfectly until recently... it may be worth trying
  do a system restore in Mode without failure for some time before painting began to have
  problems.

  If you receive auto-mises to update WIndows Update... it is possible that a
  a driver updated of some type has been installed that you aren't aware of.

  Given that the painting seems to be the only application affected...uninstalling/reinstalling
  may be worth a try... but you would need a Win XP install disk.

• Problems with HP laserjet 8100 printer.

  After weeks of no problem my hp laserjet 8100 will not print.

  Doc Gets the queue and either; test pages do not print either.

  I have windows 7

  I followed the usual stuff with msc.services etc. but nothing helps

  Please someone help - the only problems I ever is where electronic mechanical meeting! That is, printing, scanning

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer there for information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Problem with margins in duplex printing

  I have two HP all-in-one printers (6700 OfficeJet and OfficeJet Pro 8500 a).  Both have the ability to print double-sided.  Both print a document of single-side with correct margins.  However, duplex two printers add additional margins to the document and compress the type.  This can be corrected?  This is a real problem to print documents folding and tri-fold.

  Hey RLBoush,

  I've seen other messages on this problem, and people have found success using a 990c driver. Please see Shane_R thread on the use of another driver located here.

  I would like to know how this happens.

• Problem with automatic charger when printing with photo paper

  Hello

  Printing is fine EXCEPT when I try to print photos on paper HP Advanced.  I set it up to print several photos of different size on 8 1/2 x 11 via a software program.  I've never had a problem in the past.  Paper just sits there and do not feed, and finally pushes through with nothing printed.  Or if I push forward to get through, it is not aligned correctly as don't feed properly in order not to print the part of photos.  If all goes well, I'm explaining this to as you can understand the problem.

  Basically, there is a problem automatically feeding paper photo, even if I use high-quality paper.

  Can someone help, please?

  HP Photosmart C4795

  HP Presario Desktop, Windows XP SP3

  Thank you

  Gail

  You change the paper type in the print settings to reflect the paper chosen for the print job? Pages 22 - 23 has this process listed in the user manual if one any showing this post wants to look.

  I reset the printer, clean the rollers, check the print settings. This document here describes the steps to follow. I know that you do not get a hard copy of the error message, but the steps are the same for your problem to feed paper. I hope this helps.

• Problem with ink from the printer (maybe)

  Hello.
  
  Recently, I have a problem when printing it looks that the ink is spread over the page.
  
  It's as if she's not well dry.
  
  Is there an easy fix for this? The ink is old? It is possible because of something else? It's very cold outside, (-20 degrees celsius), but the printer is inside.
  I know the spray paint can be affected when it is that cold.

  (Also this incredible security gate, I had to pass through to try to get help was a pain in the *.) My shoe size is 42, btw.)

  Since it is a color printer, the colors also coat with just black. If only the black, then I would lean towards the black toner cartridge. If all the colors of defamation, then the fuser unit is probably the issue.