Problem with scanning HP f4580 printer.

Similar Questions

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• HP Officejet 5740: Problem with scan after passage of a wireless network to a USB between PC / printer

  Hello

  I would like your advice about my inability to scan from my printer control panel after establishing a connection USB with my PC. Previously, it was established as a wireless printer.

  I get messages like "Scan of the computer is not activated", "connecting to the computer has been lost' & ' The HP scanning Application has encountered an internal error. Pls restart app & try again. "

  There is no problem to use the HP scanning software in my PC for scanning or printing of my mobile device functions.

  I tried different ways to solve problems for example to turn off my printer & restarted, print HP & Scan Doc, restart my PC but nothing is.

  Your advice would be much appreciated.

  Thank you.

  Hi @Chrissy_61

  Thanks for your comments.

  If it is connected via the USB port the computer Scan is on the front of your printer default.

  Go to your control panel and select "Scan to.."  your computer should be listed.

  Hope that helps!

• Problem with scanning from the new laptop with Windows 8

  I have a Photosmart C4480 all-in-One printer/scanner/copier.  Since getting my new laptop, I have problems with the analysis feature.  I installed the software CD, and think I have downloaded the drivers for this printer.

  Indicates the serial number found on the bottom: model of regulation SNPRB-0721

  I hope you have a resolution for me.

  Thank you!!!

  I've found a workaround.  If I used Windows software to scan, it works correctly.  It works just not when I use the button on the printer itself.

• Problem with scanning of document in PDF format for computer

  someone had a problem with the computer scanning a document to PDF from printer series wireless e-all-in-one-hp Photosmart 7525? The document will appear in My Documents, but when I try and open the document I get an error message that says that the document cannot be opened. I can scan and open the document as TIF format. I am running Windows 7 Home Premium and I just installed the printer Photosmart 7525. I uninstalled and reinstalled the printer using the CD.

  Hello

  Can you open other pdf files? Do you have Adobe Reader on your computer? Please download and install on your computer and then try to reopen the file (s):

  http://get.Adobe.com/reader/

  Kind regards.

• Sometimes when a windows update it causes problems with my photosmart c4795 printer. Usually making it unable to find or may not be usable.

  problems with windows update problems with my printer causeing

  Hi Virgil13,

  · You receive an exact error message or error code?

  · What is the operating system installed on your computer?

  Run the fix it from the link below and check off the results: printing problems and printing errors:http://support.microsoft.com/gp/printing_problems

  Also check the installed updates:

  a. open Control Panel from the start menu

  b. Select programs and features

  c. click View installed upgrading

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with use of a printer on a homegroup.

  I lost a connection to printer.  When I tried a reinstall, I think that the installer could not find the printer because of something about homegroups.  I have one computer connected to the printer through usb.  Others that the internet, there is nothing.  I can't understand if I have a problem of residential group and do not understand something about homegroups even after watching all the videos, etc.  Help!

  Hello

  If you have a single stand-alone computer while you do not have a network or
  a homegroup.

  OEM for the printer manufacturer is responsible for the proper functioning of the printer
  and their drivers. Check with the printer manufacturer's support, their online
  documentation and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  ================================================

  The main issue is probably the drivers, but these can help:

  Windows 8/8.1 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8/8.1 - How to solve printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8/8.1 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8/8.1 - set or change your default print
  http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printer

  Windows 8/8.1 - device drivers - print & drivers
  http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Someone out there who has an ongoing problem with 7 refusing to print, even after that the driver was abandoned and re-installed?

  I have a Toshiba laptop that runs Windows 7 with an HP printer 6 L. I am running Open Office 4.0.0 and the latest version of Adobe Reader. To date, that the system is undesirable! The 6L display test endless pages but refuses to print anything out of system 7. I dropped 6 L Driver, registry & file cleaned up and optimized the system and then reloaded the driver off of the HP site but the system refuses to print. I even went up to turn off the printer for more than 24 hours to try to get the printer to the reduction in the memory and empty the memory to zero to try to kickstart the printer to pick up the 7 material systems. Up to present all this for nothing. 6L memory is fixed at 1 024 Ko and the document larger than I tried to print has been 136 k so the memory capacity must be nothing. Anyone, anyone, outhere who can help, please. I'm ready at this stage to give up the printer with an AX, since it is now beyond the frustration and get into madness! I must also stress that the 7 system also creates a (1 copy) in the printer Panel. There is no need too!

  Hi Mike,.

  Do you have an error message when you try to print from the Windows 7 computer?

  I suggest to refer to the following article and follow the steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also follow the steps in the following article.

  HP LaserJet 6L - cannot print from a custom Application Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=ipl00001&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=25476

  Reference:

  HP LaserJet 6 L Printer series- Frequently asked questions

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportFAQ&lang=en&cc=us&docIndexId=64178&TaskID=101&prodTypeId=18972&prodSeriesId=25476

  Feel free to get back to us if the problem persists. We would be happy to help you.

• Problem with the HP P2055DN printer.

  I use printer mentioned above often print 2-sided documents. The printer is connected RJ45 print router-switch and laptop sent by wireless LAN. After a few days (2-4) the printer in Control Panel 'forgets' duplex. I have to go into the control panel and enable the setting of the duplex to "installed". It works just fine a few days and the problem recurs.

  Can someone help me?

  I have the same problem with a 2605DN

  I have not tested but the key "Reg" is HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\HP Color LaserJet 2605 PCL6 class Driver\DsDriver, which has a printduplexsupported value that should be set to 01. If you set it in the printer driver, and then save the key "reg" by exports then right-click on DSdriver in the left panel, it will give you a file, you can double-click to set up the key as part of your departure or office.

• Problems with the launch and printing from Internet Explorer 10, with updates of Windows Installer and start-up and shutdown of the computer.

  Original title: IE 10 freezes work stoppages and turns off

  I use it is to say 10 since I have a new computer in 2012 have not had problems, but for the last week, if I try to print something from my mail I receive IE has encountered a problem and closes the page and restarts it so go to Mozilla to print, yesterday IE was out completely had to return to Mozilla to get on the web. I have also had problems with my computer do not completely stop or does not start, I get to the part type to password in the and he died, tried to install optional updates in windows and it has not does anyone know what I can do to solve the problem. would really appreciate it

  Hi Mark,

  Have you tried the steps I suggested in the previous posts? If this isn't the case, please try these steps and check if that helps.

  You can also try the steps outlined in the article and check if it helps.

  I can't print or preview before printing a Web page in Internet Explorer

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Problem with scanning from printer to PC under win8

  I have a HP Officejet pro 8600 that I moved PC on XP again PC under windows 8. having problem scanning the computer.

  Get the software error message attempts to save the scan pdf file in the directory "C:\Documents and Settings\userid\my documents" but access is denied.  There is no such directory in windows 8.

  I've uninstalled and reinstalled the software for windows 8 and run HP print and scan doctor, he says that everything is ok.  I can scan if I start it from the pc because when it gives the same error there is a way to save in a different directory.   The scanning started from the printer does not provide this option, seems to be wired, maybe an environment variable needs to be reset?

  Try using the wizard provided in the options of the Officejet.

  1. double-click on the icon of the Officejet 8600 in the office.

  • 

  2. then, select in the HP printer Assistant and look for the option Scan to Folder Wizard.

  • 

  3 follow the instructions in the wizard, also do not forget to provide the user and the password for your Windows account to allow the scanner saves the file in the folder.

  More information on > http://h71036.www7.hp.com/hho/us/en/ep/articles/scan-to-email-network-folders.html

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• HP 6500 has when I click on print save as page is in place, no problem with scanning

  After restarting the computer and the printer after a break of three days, whenever I click on print, I receive a save as message.

  I ran the HP convenience store and make the message that no anomaly.

  What operating system? It seems that the printer port is set to LEAD: rather than a physical port.  In Windows 7, for example, you would click on start, devices and printers, click with the right button on the series, Officejet 6500 printer properties Ports.  If the printer is connected with USB port would be something like USB001:, for a network connection, the port type would probably be the re-discovery of the HP network or port TCP/IP Standard HP.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Problem with scanning with Laserjet M1212nf all-in-one printer network

  I installed the drivers for my Laserjet M1212nf connected on my computer laptop 64 bit of Windows 7, but it seems like just a printer (in devices and printers). I can't scan from the laptop (I get the error "no TWAIN Device Installed").

  The figure (and work) scan function if I connect to the printer via the USB port and install these drivers, but my laptop does not usually reside in the same room as the printer.

  The scan function installs and runs correctly on a Windows XP desktop computer also connected to my network.

  Hi CW_Enloe

  I will try this tool

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/en/HHO/IPG/easy_wireless/network_diag/&lang=en&softwareitem=MP-96434-1

  If that doesn't help not please inlcude the model of the router you use (be sure that the router is running the latest firmware) which can help was good.

  It can be useful;

  RobertoR

• C410a - problems with scanning and copying

  Recently bought a new computer (Windows 7 64-bit).  The old computer had the c410a Photosmart all-in-one installed and works without any problem.  PCMover to transfer files from the old computer to the new.  Had some problems at the beginning, but downloaded the drivers for the c410a and could do print from the computer.  However, it does not scan or copy.  I've uninstalled and reinstalled the software several times to drive and keep it for the same problem.

  If I try to scan or copy of the printer, I get an error message saying that I should try to scan/copy of the computer instead.  When I try to use the HP Solution Center, I get an error message that says: Hpqdirec.exe - system error - "the program can't start because libexpatw.dll is missing on your computer.  Try reinstalling the program to fix this program. "Then a second message appears that says Configuration ASF Broadcom -"system is busy and can not initialize.  Try again later. "As I said, I tried to reinstall the software that came with the printer several times and still get the same error messages.

  So, what don't get me?

  Any help is greatly appreciated.  Thank you very much.

  Well, I think that I thought about it.  When I reinstalled the software, I assumed that all software has been reinstalled.  But apparently, only the drivers were installed and not the HP Solution Center software.  Is returned on the disc, saw a button for installing additional software, and then installed the Solution Center and that seems to have solved the problem.