Problem with vacuum created during a photomerge of 8 jpg images

Similar Questions

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Problems with signal followed during sampling of the signal

  Hello

  I'm relatively new to LabVIEW 8.0 and I'm having a problem with being able to monitor the signals that I am gaining two simultaneous analog signals.  I have the user to input the frequency of sampling and the length of the sample, and then I starts the scan, but when running the analysis, I don't see no result on the chart if the duration of the sample is passed, at which point all data comes.  Previously, I could see the acquisition of real-time data and I don't know what I've done since then have possibly that stop working.  I tried to introduce a kind of late for may allow the software to apply the data to the graphics, but I had no success.

  I have attached the VI of the data acquisition component.

  Thank you so much for reading this.

  Hello

  I suggest you try these two options:

  1. in each iteration of the while loop, add your data to the data of the previous iteration, IE use a shift register to create an Adrien to data that you have acquired. When you save the data in a file, read data from the table and not the current value of the waveform. You can read the data in the table by using a queue, or by using any simple method to pass data between the blocks.

  When you use a local variable of the waveform card, you only read the current value in the array, not its history.

  2. use a property of waveform graphs node to read the history of the ranking, convert the picture from picture to picture 1 d 2D using cluster of waveform ungroup functions and write to the file, click on "Save".

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with forms created with LC Designer, Adobe Reader 10.1 and Windows 7 7.1

  Hello

  I have an application that runs on Flex 3.5 and some xdp created with LC Designer 7.1.

  FRAMEWORK

  The application should work in Windows XP and Windows 7.

  It allows the user to submit an order and view/print the order confirmation.

  The order confirmation is a pdf file generated by a xdp created with LC Designer 7.1 (and a connection via an xml data file).

  Some pdf need to display Japanese fonts, others not (let's call them jpPDF and usPDF).

  The XP and 7 environments have Japanese fonts installed.

  USING XP

  When you use a XP environment, there is no problem to create and display the pdf, the jpPDF and the usPDF. Everything works fine and as expected.

  WITH THE HELP OF 7

  When you use a windows environment 7, I have different issues according to the generated pdf:

  jpPDF: Adobe Reader tells me that I don't have the fonts installed. When I accept to install the fonts, nothing happens and the pdf file appears completely empty.

  usPDF: Adobe Reader tells me that the created pdf file is not compatible with the latest version of Adobe Reader, so I need to upgrade. But I have the latest version available...

  Someone of you have encountered similar problems? Is there really something wrong between LC Designer 7.1 and Windows 7?

  Thanks in advance for your time and help.

  Kind regards

  BS_C31

  Hello

  I had problems with the installation at the request of the language packs, which I presented something on our portal of the company.  Seems to work fine if I download them manually, I think that there are five, it's one, Japanese http://www.adobe.com/support/downloads/detail.jsp?ftpID=4881.

  I had no problems using Windows 7 however.

  Concerning

  Bruce

• Satellite P100-347 - problem with the judgment during the game

  I have a problem with my (pspa6e) Satellite P100-347

  After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
  I knew it was close because of high gpu or cpu temp...

  I felt that my laptop was warm, but after playing for a while its normal...

  So I installed HWmonitor to check my gpu, CPU and disk hard temp...

  That's what I show:

  THRM: 61.C - 141.F

  CPU: core0\1 - two 64.C - 147.F

  GPU: turn 85 stable - 90.C
  This normal use... no games...

  HARD DRIVE: 39.C

  Something must be wrong! GPU temp is too high?
  I tried a fresh install of the OS...

  Thnx for all the help and answers!

  Hmm these times can be a little high.

  Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.

• Problem with PDF created with Captivate 6

  I've been using Captivate since version 4 and this is the first time that I had this problem. The generated PDF (which is the expected file size) displays a blank page with only the button table of contents who is sitting there flashes quickly. I tried to change the version of the Flash Player targeted without a bit of luck.  Previews and HTML output is fine and so is the .exe file. I use Adobe Acrobat 11 on a 64-bit Windows System. It is a quite small with about 15 slides project and FLV videos. I have no problem with distill with any of my other programs (FrameMaker, LiveCycle, Photoshop etc.). All settings, I can tinker with?

  Any ideas?

  Nadeem

  Hello

  You can refer to this thread for a solution.

  http://forums.Adobe.com/message/5244355#5244355

  Anthony

• Problem with New-OSCustomizationSpec during the deployment of a new virtual machine

  Hi all, I'm having a problem trying to deploy a VM from a script.  I started with this thread LucD code: https://communities.vmware.com/message/2220479#2220479. I'll start with the Basic code that I use:

  $myCluster = Get-Cluster -Name "Cluster1" | Get-ResourcePool "Test"
  $myTemplate = Get-Template -Name "Win 2008 R2 SP1 Std - Powershell"
  $myDatastoreCluster = Get-DatastoreCluster -Name "DataStoreCluster1"
  $myVM = "Adam12"
  $IP = "10.0.0.1"
  $SubnetMask = "255.255.255.0"
  $Gateway = "10.0.0.254"
  $DNS = "10.0.0.10","10.0.0.11"
  
  Get-OSCustomizationSpec -Name "Server 2008 R2 Standard - Powershell" | New-OSCustomizationSpec -Name temp -Type NonPersistent
  Get-OSCustomizationSpec -Name temp | Get-OSCustomizationNicMapping | Set-OSCustomizationNicMapping -IpMode UseStaticIP -IpAddress $IP -SubnetMask $SubnetMask -DefaultGateway $Gateway -Dns $DNS
  
  New-VM -Name $myVM -Location "Folder1" -Template $myTemplate -Datastore $myDatastoreCluster -ResourcePool $myCluster -OSCustomizationSpec temp
  
  

  Very simple.  Now I can use the New - VM above command directly against the template and the OSCustomizationSpec, and that works just fine (and of course manually provisioning works as well).  However, as soon as I try to make a new one and use the 'temp' specification, the virtual machine never gets to the name change process and I ended up get an error oobe indicating "impossible Windows analyze or process the unattend answer file."  I noticed in the Summary tab in vSphere that the IP address is correct on this basis, but the name of the server never changes the name of the original model.

  I stripped down and got out of line 10 above (static IP address setting) and just left it to DHCP and it doesn't have the same way.  Any ideas on what could be the cause?  Everything else works, it puts the virtual machine in the correct folder, the data store right pole and the pole of the right.

  As a bonus question: after all what I have read, VM storage profiles are not accessible via PowerCLI.  This changed at all?  It would be good to set the profile in a script instead of having to do it manually after the fact.  Thank you!

  Adam

  Answering my own post here...

  Seems that it works if I create the New OsCustomizationSpec with - Type persistent instead of NonPersistent.  I'm on vSphere 5.0 and 5.0 with PowerCLI 5.1 ESXi, if my guess is that those of you who have found this works are on vSphere 5.1.

  I'm just starting my big 5.5 update, so I'll re - visit it at that time.  For now, I'll just to create a random variable of 8 characters for the temporary custspec and remove it when the virtual machine is deployed.  Seems to work fine and I can have several builders of VMs at various locations without stepping on each other.

• Problem with dynamically created in a loop function

  Hi, the project is to create a thumbnail image dynamically from a xml file and display an overview with the event delivery. My problem is that I dynamically create a delivery for each thumbnail and inside the function the name of the image to load. I get no error, but the loaded image is always the last of the loop. Where is my mistake? Is there a solution?
  Any help will be welcome. I work hard on it but not more idea. Thank you very much for you reply

  Thank you very much Pajaroplus, it works with your help!

• Strange problem with password created on my Satellite L20

  I bought a Toshiba Satellite L20 laptop with model No. PSL2XL-01R007
  I registered the password using the Toshiba help utility that has been placed on the desktop, using the secure user function.

  After stop of the laptop and turned on, it prompted me to enter the password before it can start. When I entered the password which I thought I had entered windows using the Toshiba help utility under secure user, it gives me a message of invalid password whenever I try to enter the password. So I can't use my laptop. The BIOS is the Phoenix.

  Thanks for your advice and assistance

  Hi Hung

  I tested it today with my Satellite L20-182 and everything works fine. I tested the options for the user and supervisor passwords, and there is no problem at all.

  Sorry, but I think that you enter the wrong word as password and this is the reason why you cannot start the laptop. I really put t see any other explanation.

• Having problems with itunes and during the uninstall and re - install error 2350 would come to the top?

  I'm not sure when the problem occurred, maybe 2-3 weeks ago and trying to create a restore date system before the 'problem'... the dates do not go far enough?

  Hi Kabramble,

  ·         Did you the latest changes on the computer?

  Check out the link to the Apple Web site and try the steps mentioned below.

  Bugs and Error Messages

  http://discussions.Apple.com/thread.jspa?threadID=786774

  For further assistance, you can post your request in the forums of Apple.

  http://discussions.Apple.com/category.jspa?categoryID=150

  You will no more find system restore points if they are not created.

  Restore points are saved until the system restore reserves HDD space is filled. As new restore points are created, old ones are deleted. If you disable the Protection System (the feature that creates restore points) on a disk, all restore points are deleted from this drive. When you turn System Protection, new restore points are created.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Windows update during the installation of the printer

  I tried several times to install an older printer to the Epson (Stylus Photo 925) on a computer running Windows XP Professional.  When I get to the part of the installation where I select the printer from a list in Windows this printer is not available, so I chose to Windows Update the list.  I've done several times, and the list of Epson printers is actually reduced after selecting the 'Windows Update' button.  Its unusual because a few weeks ago, I did the same configuration for a new machine of Windows 7 and Windows Update added this printer to the list.

  I should add that my printer is on a print server if the installation is a bit more detailed than just plugged in the USB cable and installation.

  If anyone can help with this question?

  Updates required driver from the download page of the device manufacturer or the computer, not Windows Update. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• problem with credentials named during the agent deployment

  Hi gurus.

  Yesterday, I have deployed an agent on a host of test server and it worked like a charm.

  Except that...

  I used the oratest user under the name of credentials... This meant (I think) that when it came to detect different targets on the host to monitor, OEM could not see that those who belonged to oratest (couldn't see oratest database).

  It was not ideal because it is has several databases I want to monitor on this server.

  So I uninstalled everything and now trying to deploy an agent once again, using this https://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#EMBSC184

  However, I am now stuck on the choice of a credential named... which user should I choose for this? I need to create a separate, "oem" user to do all this? I'm not even sure that the choice of the user oratest was a mistake... I'm more than a little confused and would appreciate some advice kindly.

  Version: 12.1.0.4.0

  RHEL 6.5

  Thank you

  CAI

  ALL THE:

  I learned that in addition to plugins, make sure (for the discovery of the db) that your Oracle home must be located in the oratab

  In addition, if you have sort of a default location for your listener.or according to the $TNS_ADMIN, then it must be placed in your agent owner bash_profile.

  Above and outside.

• Problem with dynamically creating an end-to-messageStyledText

  Hello.

  I have an advanced array and there is a bean MessageStyled of text inside that. Now im trying to put the message of the art to the message text style using the following code in processrequest

  OAMessageStyledTextBean helperText = (OAMessageStyledTextBean) QuesTbl.findChildRecursive ("Question");

  OADataBoundValueViewObject helptxt = new OADataBoundValueViewObject(helperText,"HelpText","QuestionDetailsVO");

  helperText.setAttributeValue (SHORT_DESC_ATTR, helptxt);

  But when im running the page, unable to see the end.

  Please help me solve this problem

  1)

  try using OAWebBeanConstants.TIP_ATTR

  helperText.setAttributeValue (OAWebBeanConstants.TIP_ATTR, helptxt);

  (2) and make sure you use the correct name of the ViewObject.

  'QuestionDetailsVO '.

  the name of VO is probably in your AM 'QuestionDetailsVO1 '?

• Problem with applications created using VB.

  Original title: App crash error on windows 7 for buiilt in vb exe, app works fine on xp.error: msvbvm60.dll

  I'm getting an appcrash on windows environment 7, but my exe that is built in vb works well on windows XP. His watch the msvbvm60. DLL error in Event Viewer. I've demoted the msvbvm60. DLL to the XP version but still getting the same error.

  Hello
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query on the MSDN Forum site:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualBasic