Problem with 'View' of defaule settings.

Similar Questions

• Problems with views. When no data I have to delete and recreate it

  Hi all.

  I have a problem with views. From time to time I can't see the data from the query, and I have to file the notice and then create it again, after that it works.

  Any idea?

  Best regards

  Hello.

  The benefits of joining is correct.

• USB problems with view 5.3

  I have problems with view on an Atrust W100 5.3 zero client attempts to use a Magtek USB card.  When I plug the blow of the card into a USB port and the test with the notebook, the device works, but when I try to slip something in QuickBooks POS there are missing characters and the card is not recognized.  I contacted MagTek and they pointed me to a download that I can run and slow the flow of data entry, however when I try to run it it is unable to recognize any USB device.  Is there anything I can do to get this MagTek card reader to work with the view 5.3?

  Thank you

  Looks like you're not actually redirecting the USB device, and instead it is considered a local keyboard to the zero client, with the keystrokes that results from being sent all over the office. Teradici have a tech support article detailing how to make USB devices which, by default, are kept up the:

  https://TechSupport.Teradici.com/ICS/support/KBAnswer.asp?questionID=616

• Problems with view 4.5 and PCOIP screen resolution.

  I know this question has been asked before, but I have yet to find a solid solution. The last activity that I saw on this was in October 2010, so I thought I would like to start over rather than resurrecting an old thread. Please see below the description of the problem.

  We have a number of XP virtual machines configured in a dynamic pool for our users. The pool settings are configured to allow a maximum of 4 monitors, with a resolution 1920 x 1200 on each monitor max. Users report that when they log in and try to change the resolution, the settings tab in the display properties page disappeared.

  Thanks to this research, I stumbled upon VM KB article 1020809, updated less of a month earlier, indicating a fix for this problem (changing the registry NoDispSettingsPage value to 0). I did it on my main template, however, when users log in is set to 1 return.

  There was also a thread in this forum who suggested changing the option multi-screen in the settings of the Pool to 1, leaving vCenter update, then change it back and then by a stop and start on all machines. I tried as well, but it has not solved this problem.

  Finally, I tried to turn OFF the option to hide the Group Policy Settings Page, but the setting remains at 1. Can I change the resolution of the screen via a script (it does not persist by a closing/opening session, that is another matter), but can not get the settings tab appears.

  I saw there is a model adm for Vista or Windows 7, but I am not mistaken, is there anything more that can be done to XP? I can't understand why this keeps getting ready again to 1 and am hoping that my users will not at all be stuck with a resolution of 1920 x 1200. As a side note, if I change it programmatically, what (s) do I need capture to have persist through a logoff (we use a third-party management tool ProfileUnity call profile)?

  Any thoughts would be much appreciated.
  

  What is the native resolution of the screens in use? I found that view will automatically set resolution in accordance with the native resolution. At least that seems to be the case in my situation.

• Big problem with the files and Settings Transfer Wizard.

  Basically, what has happened here, it is that I did a backup of the files on the computer of a friend with the wizard to transfer to an external hard drive, but I started on the old computer and for one reason or another never get the CD Wizard so I thought that I was OK.  Don't think.  The idea was to have the backup files in case I needed to reformat the drive hard, I ended up reformatting the drive and when I finally got the installation more done with trying to run the file and Settings Wizard and when I chose the external drive that files were on and then subsequently the folder and it said that it did not contain information.  So basically I'm stuck with a complete record of .dat files, and the wizard will not let me extract the files off the drive.  Is there anyway that I can return information about the files, or I'm totally finished.

  Everything worked ok that it proved just that he did not want to me to choose the actual file as a path, but the hard drive.  It was just something simple that I pop up.  Thanks for the help but I don't know that it would have been the next problem if I didn't had not updated the operating system first.

• Help! Problem with Camera Raw image settings

  Hi all

  I've recently upgraded to El Capitan in Snow Leopard. I use Photoshop CS5.1 and 6.3 of ACR. I work with my Canon T5i DNG files. (conversion from the CR2 files with the DNG Converter).

  OK, so this is the problem: before upgrading the operating system, everything was fine. Now, I noticed that all the files that I have previously set in ACR, are always "adjusted" visually, but all the sliders have been reset to default and some are grayed out.

  For example, let's say I have an image that I've desaturated in the past. Now, if I open it in ACR, the image is still gray, but all cursors are reset to zero, and the saturation slider is sometimes gray. Nevertheless, the color information is gone, so I can't go back to the original version of the color.

  Again, what are the DNG files, so no XMP file don't like using CR2 files...

  Any suggestions?

  Thank you

  Marc

  I saw your picture on my computer Windows 10 using Camera Raw 9.3.1. On my computer, loaded with the basic settings the image that looks like this:

  

  And on the Panel of Hue/Saturation/Lightness "Convert to grayscale" was checked. But the image was posted in the 2010 process version. As soon as I changed the version of process for 2012, all cursors Basic returns on their positions by default. I don't know if that answers your question. But it is the behaviour that I have seen.

• Problems with views based on a hierarchical query

  Datamodeler 3.1.3.706 (SQL Dev 3.2.10.09):
  
  When you create a view that uses a hierarchical query, the query designer encounter various difficulties:
  
  When pasting in the SQL code, if the notice is registered without first clicking the schema update button, the object in the entity-relationship diagram view provides a faithful representation of the view without errors, but when the reopening of the view, the code is missing.
  
  Simple example with the classic emp table:

  SELECT level lev
        , emp.*
     FROM emp
    CONNECT BY prior empno = mgr
    START WITH mgr        IS NULL

  If you press the schema update button to refresh the display. He mangles connect it by the clause and the view gets marked with a warning/error icon in the diagram of the relationships, but the now decomposed code remains available on reopening of the query designer.
  
  Same code as above after having clicked on the button of update of schema:

   SELECT Level lev
  , emp.*
     FROM emp
    CONNECT BY

  Other issues are met if the query contains a column CONNECT_BY_ % nickname hierarchical:

  SELECT level
        , emp.*
        , connect_by_root emp.ename root_ename
     FROM emp
    CONNECT BY prior empno = mgr
    START WITH mgr        IS NULL;

  In this case, paste in the code and clicking Update schema button or the OK button translates into a "unexpected Token' error analysis.
  
  These problems are encountered with the logic model and the relational.
  
  Is this a known issue? I searched this forum but have not found any references to this.
  
  Thank you
  
  Sentinel

  Hi, Sentinel,

  I logged a bug for this.
  You can try 3.3 DM treat it better first problem, analysis of connect_by_root operator will pass if you do not alias.

  Philippe

• Problems with View Composer / vCenter 4

  Hello

  I upgraded my server vCenter v4 yesterday (build 162856) and ran into problems of performance and pages of material due to a collision with the port 8443 - that was used by the View Composer.

  Then... I moved my View Composer 18443 port number, that makes all the cunning vcenter work, but now does not work my composer. I changed the port in the overview Manager it connects to and I can get as far as the button complete, when I create a new pool configured automatically. vCenter then creates the folder for him and he removes (or almost) immediately. View Manager then up a ' composer of internal error. Contact your system administrator.

  In the newspapers, a Java error is reported: ' problem setting HTTP connection:

  javax.net.ssl.SSLHandshakeException: remote host closed connection during

  handshake. "

  Any suggestions gratefully received! I'm guessing that something is always looking for an answer on port 8443, but I don't know what!

  See you soon,.

  Iain

  Probably during the 2nd half of ' 09...

• Problems with default vmnet network settings

  We live a weird behavior, where we cannot reach hosts on our network in the IP range *. *. 14.*. This seems to affect only our developers with a Mac (OS X 10.6.8) with VMWare Fusion installed. With VMware installed using de.14 when trying to connect to what anyone on the reseau.14 mac think it's network VMware and does not leave the computer.

  I tried to change the default value in the settings vmnet following the instructions provided in a post on this forum (http://communities.vmware.com/message/1251292) but I can't yet reach all hosts on the network 14.*.

  Did I miss something?

  Thanx

  Gaby

  We live a weird behavior, where we cannot reach hosts on our network in the IP range *. *. 14.*. This seems to affect only our developers with a Mac (OS X 10.6.8) with VMWare Fusion installed. With VMware installed using de.14 when trying to connect to what anyone on the reseau.14 mac think it's network VMware and does not leave the computer.

  Frankly I hate it when users post things like "our network in the IP range *.» *. 14.*. "because it makes it harder to follow what that means!

  To help understand what is the best way to provide comprehensive diagnostic information is to use the command "Collect information to Support" the Fusion of VMware (menu bar) > help > collect Support information and then attach the .tgz file it created on your desktop for a response post.

  I tried to change the default value in the settings vmnet following the instructions provided in a post on this forum (http://communities.vmware.com/message/1251292) but I can't yet reach all hosts on the network 14.*.

  Did I miss something?

  Yes, what you missed it that put it over 3 years and is more fully applies if using VMware Fusion 3.x.

  Here are the commands of base/files and need cd in the directory VMware Fusion as something different in the 3.x line where it did not work right if you do not.  If you want to change the IP address of the VMnets or modify or add additional VMnets and then make changes to the first network file and the only edit dhcpd.conf files if you need to change the additional default values.

  cd "/Library/Application Support/VMware Fusion"
  sudo ./boot.sh --stop
  sudo nano networking
  sudo nano ./vmnet1/dhcpd.conf
  sudo nano ./vmnet8/dhcpd.conf
  sudo nano ./vmnet8/nat.conf
  sudo ./boot.sh --start
  

  Also have a look at the thread next if you want to add a few custom VMnets: Re: creation of two (or more) Host-Only totally isolated networks

• I have problems with viewing and downloading videos

  Hi I'm trying to watch videos in youtube and windows media player, but I can't do it. I use Windows XP Professional when I start watching a video, it starts to download and then I get the circle to peas autour going around and around but it does not play when she plays it stops and how can I solve this problem?

  Thank you
  E-mail address is removed from the privacy *.

  Hi upthearts,

  One of the possible reasons could be the speed of the internet thanks to which time can take to the buffer. It has one or more of the following could cause this;

  ·         The Internet connection speed

  ·         Amount of RAM (Random Access Memory) used on the computer

  ·         Amount of memory available on the computer

  Method 1: You can pause the video and let the video buffer for a few minutes before selecting the 'Play' button again. Giving the download a few minutes to catch up while the video is paused can help solve the problem.

  When the bar of State indicates the video transfer or the download is complete, resume playback of the video using the controls.

  Method 2: You can also contact your ISP (Internet Service Provider) to check connection problems.

• Problems with synchronization of the settings and the list of sites

  Hello!

  Recently got Adobe Creative Cloud CC 2015 but I'm a little disappointed that the version of cloud does not behave like a cloud version. Dreamweaver CM³ in synchronization settings, I set always use the Cloud version and then import the sync settings. Everything is marked in sync settings. My main computer at home has welcome screen off, and he has two sites in the list of sites. At work, I have always the Welcome screen and 1 single site in the site list. Tried to restart and apply updates whenever he says but its not doing anything.

  Hi Johnny,.

  We will not sync preference screen between different versions.

  In regards to the sites not getting not migrated, could you please follow the mentioned below as follows:

  1. open Dw CC and create a new site (dummy) and synchronize it to the cloud. This will ensure that all sites are synchronized to the cloud.

  2. close Dw CC and open Dw CC 2015, go to the Preferences dialog box > synchronize settings category and check the box "import the sync settings.

  3. close the Dw CC 2015 and restart the application. Let the full synchronization and push the button apply. This will get all the settings from the previous version.

  Let me know if you need help most.

  Thank you

  Confidante

• Problem with Flash in Chrome

  Recently, my Flash has been acting generally weird. I can't view some flash videos, although youtube works, and Flash is not allowing me to define Web sites to store data, it is impossible to use many flash-dependent Web sites. When I try to solve this problem with the Flash Global Settings Manager, it simply does not save my choice and do not let me even click on the "Allow third-party content Flash to store data on your computer", which is what I need to fix it. In addition, even if I do that I'm connected, whenever I have navigate to Global Security Settings page, it seems to disconnect me. Any help for Flash to save my settings, or why the videos do not work in Chrome?

  Try the following

  • Close all browser windows and open Windows Explorer
  • in the address bar type%appdata%\Adobe
  • Remove the 'Flash Player' folder in there
  • in the address bar type%appdata%\Macromedia
  • Remove the 'Flash Player' folder in there

  Now, try again to change the settings of the Flash Player.

• Problems with Windows Update! ("some settings are managed by your system administrator"?)

  I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!

  You can see the effects of a hijackware infection. That being said...

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.

  3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  4. restart & test by...

  How will I know if my computer is up to date? :
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with the Acrobat PDF acceptance of the EULA in Safari Viewer

  We are currently having problems with our Acrobat PDF Viewer in Safari. When users open a pdf file in Safari, he is invited to the first open Acrobat Pro and accept the EULA. We tried a variety of different things, but we have been unable to remove it.

  Here's what we tried:

  Adding a FeatureLockdown to the com.adobe.acrobat.pdfviewer.plist and the com.adobe.acrobat.pro.plist blocking EULA, EULAAcceptedForBrowser and bLaunched to true.

  Repackaging Adobe Reader with the EULA accepted again.

  Remove the Adobe PDF plugins (it had marginal success, but it defines an extract to the default pdf viewer outside of Safari as well.) It takes Acrobat to stay by default.)

  I can provide the plist files edited if they are needed.

  I managed to solve the problem by applying the following preferences for all user accounts (our deployment toolkit can do for new users and profiles set cache):

  / Users/username/Library/Application Support/Adobe/Acrobat/11.0/

  Exchange-ProMessages

  SharedDataEvents

  UserCache.bin

  / Users/username/Library/Preferences /.

  com.adobe.Acrobat.Pro.plist

  com.apple.LaunchServices.plist

  / Users/username/Library/Preferences/Adobe /.

  .30142FB7F3A2

  / Library/Application Support/Adobe/SLCache/QUNDRVNTX0NIRUNL.slc

  / Library/Application Support/Adobe/SLStore/.230E4A0DF1DC

  These profile settings user as well as the file plist in the folder/Library/Preferences/Adobe/have solved our problem.

• Problem with the difficulty of opening the old tabs settings and save files when a new session is opened

  Hello
  Since 2 weeks I have a problem: I always set my settings to restore the previous session with all my tabs and I choose that Firefox asks me where I want to save my downloaded files. Now, every time I close Firefox and I open it again, it is not taken into account and 3 tabs are opened: Firefox, Google, and thanks to install Zotero! I spare it, but every time it opens these tabs and not man. Ditto for saving the files. It goes back automatically to open the start page and save my file in the downloads. Even if I spare, it's the same.
  I've desinstalled CCleaner (I thought it might be that), but nothing changes!
  Help, please. Thank you very much!
  Martha

  Here's what I'll try:

  • Reset Firefox - that should solve the problem, but it will change the settings like where files are downloaded and what tabs open at startup back to their default values.
  • Then change your download and back session restore preferences to how you like them.

  Here's how:

  1. Go to help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.
  5. Open the window of options - tools > Options > general
  6. In the general Panel set Firefox to open your tabs from last time and set Firefox to ask you where to save downloads.
  7. Click OK

  That should do it. Let me know if it worked.

  Thank you
  
  Michael